http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
삼중 다공판형 맥동탑에서 액적크기 및 분포에 대한 연구
조병렬,황성태,이보성 ( Byung Real Jo,Sung Tai Hwang,Bo Sung Rhee ) 한국공업화학회 1995 공업화학 Vol.6 No.6
삼중 다공판형 맥동탑에서 평균액적 크기와 분포에 대한 연구를 수행하였다. 맥동탑은 직경이 4.65㎝이고, 유효 높이가 6m이며, 다공판의 hole 크기가 2.5㎜이며, 개공비가 30%인 삼중 다공판으로 구성되어 있다. 실험은 물질전달이 있는 계와 없는 계에서 실시하였으며 물질 전달이 있는 계로는 40% TBP(Tri-butyl phosphate)/dodecan-2N HNO₃UNH(uranyl nitrate hydroxides) 용액을, 물질 전달이 없는 계로는 40% TBP(tri-butyl phosphate)/dodecan-2N HNO₃ 수용액을 선정하여 수행하였다. 맥동탑 내에서의 평균 액적 크기 및 분포는 사진촬영으로 측정하였다. 맥동탑 내에서 액적크기 분포는 Mugele-Evans 분포를 이용하여 해석할 수 있었다. 액적의 평균 크기는 맥동탑 높이, 맥동속도, 분산상 공탑 속도가 증가할수록 감소하였으며, 연속상 공탑 속도에는 거의 영향을 받지 않았다. 또한 연속상에서 분산상으로 물질전달이 있는 경우가 물질전달이 없는 경우보다 평균액적크기가 더 크며, 삼중다공판형 맥동탑 내의 평균액적크기가 표준형 맥동탑 내의 평균액적크기보다 큰 값을 가졌다. This work has been carried out to study the mean diameter of drop and its distribution in a pulsed column with three manifold plate type. The column, which is 4.65㎝ of diameter and 6m of effective height, is consisted of three manifold perforated plate groups having 30% of free area and 2.5㎜ of hole diameter. The experiments were performed for systems with and without mass transfer, and then, the experimental systems were chosen UNH(uranyl nitrate hydroxides)-40% TBP (tri-butyl-phosphate)/dodecan and 2N HNO₃-40% TBP/dodecan, respectively. The droplet size in pulsed column was determined by photographic method. The droplet size distribution can be interpreted by Mugele and Evans distribution. The mean size of droplet has been decreased with increasing of pulsed column height, pulsed velocity and dispersed velocity, but it has been affected weakly by continuous flow rates. And also, the mean size of droplet with mass transfer was larger than that without mass transfer, and the mean size of droplet in pulsed column with three manifold plate type was larger than that in pulsed column with standard plate type.
강영호,권선길,양영석,황성태,장인순 ( Young Ho Kang,Seon Gil Kwon,Yeong Seok Yang,Sung Tai Hwang,In Soon Chang ) 한국공업화학회 1992 공업화학 Vol.3 No.2
저준위 방사성 액체폐기물의 새로운 감용방법으로써 cellulose acetate막을 사용한 투과증발법의 연구가 수행되었다. 실험결과에 의하면 일반적으로 유기물의 분리에 사용되는 투과증발법은 액체폐기물의 감용을 위한 제염효과가 우수하였고, 수분의 증발속도도 저준위 방사성 액체폐기물의 감용을 위해 널리 사용되는 자연증발에 비해 현저히 빨랐다. 또한 주입용액의 조건에 따른 실험결과를 토대로 투과증발특성을 평가하였으며, 투과증발량을 증가시키기 위해 cellulose acetate막의 최적제막조건을 설정하였다. As a promising method for the volume reduction of the low-level liquid waste, the pervaporation process was studied using a cellulose acetate membrane. Experimental results showed that the pervaporation method, usually applied to separation of organic materials, has a good decontamination effect for the volume reduction of liquid waste and the evaporation rate of water in this process was markedly faster than that of natural evaporation method, a wide-used process for the volume reduction of liquid waste. Depending on the feed solution conditions, the pervaporation characteristics were evaluated by the experimental results and the optimum conditions for preparation of the cellulose acetate membrane were established to increase the pervaporation flux through the membrane.
소듐분위기에서 물 누출로 인한 Ferrite Steel 에서의 반응현상
정경채,김병호,권상운,김광락,황성태 ( Kyung chai Jeong,Byung ho Kim,Sang woon Kwon,Kwang rag Kim,Sung tai Hwang ) 한국공업화학회 1998 공업화학 Vol.9 No.2
액체금속로 냉각재인 액체 소듐에서 시편의 누출특성을 소듐-물 반응 실험에 의해 조사하였다. 소듐-물 반응 현상의 확인은 물 누출 실험 전후에 Fe, Cr 및 Ni 등과 같은 시편의 조성 변화로 확인하였다. 100 kg/7㎠의 누출 압력으로 4시간 동안 시편의 누출 경로를 통해 물을 누출시킨 결과, 누출경로에서 소듐-물 반응생성물들이 침적되어 있는 것을 확인하였으나, 부식에 의해 누출경로가 완전 파열되어 다량의 수중기가 액체 소듐속으로 빠져나가는 re-openning 현상은 관찰되지 않았다. 시편의 누출경로가 막히는 self-plugging 현상은 소듐-물 반응에 의한 반응생성물과 시편의 부식에 의한 부식 생성물이 주 원인으로 추정되고, re-openning 현상은 시편의 누출경로에서 열적인 transient로 추정되었다. Water leak phenomena in the liquid sodium, which is a coolant of liquid metal reactor, were investigated by carrying out sodium-water reaction experiment. It was that sodium and water react each other by the analysis of material composition of aspecimen at the end of experiment. When steam of 100 Kg/㎠ was passed through the leak path of the specimen for 4 hours, reaction products from sodium-water reaction were observed on the leak site. However, re-openning phenomena were not observed at this condition. It was interpretted that the reaction product precipitated on leak path and thermal transient caused self-plugging and re-openning phenomena, respectively.