http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
APV-I 급 KASS 통합운영국 및 통신네트워크 설계 현황
손진관(Son, Jin gwan),최철희(Choi,Chulhee),최광식(Choi, Kwang sik),홍운기(Hong, Woonki),이은성(Lee, Eunsung) 한국항공우주연구원 2020 항공우주산업기술동향 Vol.18 No.2
SBAS (위성기반 보강항법 시스템)는 국제민간항공기구가 국제표준으로 정한 GEO (정지궤도) 위성을 통해 GNSS 신호의 보정 정보와 무결성 정보를 제공하는 시스템이다. KASS는 한국형 SBAS로 주요 목적은 항공기에 APV-I급 서비스를 제공하는 것이다. 항우연은 현재 KASS 프로젝트를 수행하고 있다. 본 논문은 KASS 요구사항을 기반으로 KASS 시스템의 통합운영국 및 통신네트워크의 시스템 설계 및 설계 현황에 대하여 설명한다. SBAS (Satellite Based Augmentation System) is provide correction information and integrity information of GNSS (Global Navigation Satellite System) signal through GEO (Geostationary Orbit) Satellite, and it has been designated as international standard by ICAO (International Civil Aviation Organization). KASS (Korea Augmentation Satellite System) is Korean SBAS. The main purpose of KASS is to provide the APV-I service, KARI (Korea Aerospace Research Institute) is carrying out a KASS project. In this paper, described design and design status of KCS (KASS Control Station) and communication network system, which are based on KASS requirements.
조형욱(Hyungwook Cho),박병훈(Byunghoon Park),김용민(Yongmin Kim),최철희(Chulhee Choi),최성희(Seonghee Choi),김기홍(Kihong Kim),천권수(Kwonsu Chon) 한국방사선학회 2011 한국방사선학회 논문지 Vol.5 No.6
경 X선 형광분석 기법에 사용되는 X선 튜브는 X선의 휘도가 낮아 분석의 정밀도가 떨어지고 분석 시간 또한 오래 걸린다. 모세관 집광소자를 이용하면 X선 휘도의 이득(gain)을 최소 10 이상 얻을 수가 있다. 모세관 광학소자는 8.4keV의 텅스텐 특성방사선을 효율적으로 집광할 수 있도록 설계되었다. 파이렉스 유리로 된 모세관 모재를 풀러 (puller)를 이용하여 45 g의 추에 650˚의 온도를 가하여 모세관 광학소자를 제작하였다. 모세관 광학소자의 제작은 총 460분이 소요되었으며 제작된 모세관 광학소자의 길이는 87 ㎜, X선 입사부의 직경은 300 ㎛, 출구부의 직경은 192㎛로 제작되었다. 제작된 모세관 광학소자를 경 X선 형광분석에 적용하면 황(S)과 같은 경원소 검출의 정밀도를 높일수 있을 것이다. An X-ray tube used an X-ray fluorescence analysis system has a low X-ray photon intensity which results in reducing measurement accuracy and increasing exposure time. These shortages can be overcame by using a monocapillary optics. A monocapillary optics was optimally designed for focusing the characteristic X-ray of tungsten (8.4 keV). The monocapillary optics can achieve a gain of 10 at the least. The monocapillary optics was fabricated by using puller and pyrex glass, raw material. In fabrication, a weigh of 45g and a temperature of 650˚ was loaded. The total fabrication time was 460 minutes. The fabricated capillary had 87 ㎜ in length and maximum diameter of 300 ㎛ and minimum diameter of 192 ㎛. When the fabricated monocapillary optics is applied to an X-ray fluorescence analysis system, the detection accuracy for soft elements, for example sulfur (S), will be improved.