http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김영수,진유동,문양고 釜山大學校生産技術硏究所` 1998 生産技術硏究所論文集 Vol.54 No.-
염화물함유 콘크리트의 투수성과 철근부식에 미치는 영향을 규명하기 위해 염화물 함유량을 0, 0.3, 0.6㎏/㎥으로 변화시키고 W/C비를 0.4, 0.45, 0.5, 0.6으로 변화시킨 상태에서 투수계수, 철근 부식면적율, 압축강도, 슬럼프, S.E.M에 의한 미세구조를 보통 콘크리트, fly ash 혼입 콘크리트, AE 혼입 콘크리트와 비교하여 다음과 같은 결론을 얻었다. 1) 콘크리트 투수계수는 W/C비 또는 염화물 함유량이 클수록 증가하였다. W/C비 0.5까지는 투수계수의 증가폭이 크지 않으나 W/C비 0.65에서는 염화물 혼입 및 보통 콘크리트의 투수계수가 크게 증가하여 W/C비가 염화물 함유량 보다는 특수성에 더 큰 영향인자임을 알 수 있었다. 2) 철근부식 면적율은 투수계수와 마찬가지로 W/C비 또는 염화물 함유량이 클수록 증가하였다. W/C비 0.65에서 보통 콘크리트의 투수계수는 염화물 혼입시와 유사하나 철근부식 면적율은 현격히 작은 결과를 나타내 투수계수의 증가에 따라 철근부식 면적율이 반드시 비례하여 커지는 것은 아님을 알 수 있었다. 3) 플라이애쉬 및 AE감수제를 혼입하면 콘크리트 투수계수 및 철근부식 면적율이 크게 감소하여 밀실화 효과가 우수하였으며, 피복두께를 2㎝에서 3㎝로 증가 시키면 염화물 및 혼화재 혼입 유무에 관계없이 철근부식 면적율은 모두 감소하였다. The purpose of this paper is to investigate the coeffecient of permeability and the properties of corrosion of steel in concrete containing chloride. For this purpose, the experiments for the permeability and the rate of corrosion area by selecting factors and levels such as chloride content, W/C and admixture were executed. The major results are as follows. 1) The coefficient of permeability was increased with increasing chloride is higher than that of plain concrete. 3) The permeability and the rate of corrosion area in concrete containing fly ash and AE water reducer is lower than that of plain concrete and concrete containing chloride at the same W/C 4) The rate of corrosion area was decreased with increasing covering depth from 2㎝ to 3㎝.
PVdF 나노섬유와 Graphene Oxide 하이브리드막에 관한 연구
정혜민,진유동,변홍식,양우석 한국막학회 2013 멤브레인 Vol.23 No.3
본 연구는 microfiltration (MF) 적용을 위한 PVdF/GO 하이브리드 나노섬유막(FG) 제조에 관한 것이다. 지지체인 PVdF (polyvinylidene difluoride) 나노섬유막은 N,N-Dimethylacetamide (DMAc)와 아세톤에 PVdF를 녹여 방사용액 제조 후 전기방사법을 이용하여 제조하였다. 본 연구에서 사용된 GO (grapheme oxide) sheets는 Hummer’s 방법에 따라 제조되었으며, PVdF 나노섬유 지지체 위에 에탄올에 분산시킨 GO용액을 분사함으로써, 최종적으로 PVdF/GO 하이브리드 나노섬유막(FG)을 제조하였다. FG막은 SEM, Raman, 접촉각, 기공특성분석장치(Porometer), 만능인장시험기(UTM)를 사용하여 조사하였고, 수투과도 분석은 제작된 셀(Dead-End Cell)을 이용하여 측정하였다. 접촉각 측정 결과로부터 제조된 FG막의 표면이 친수성으로 개질되었음을 확인할 수 있었으며, 수투과도값은 PVdF막에 비해 약 2.5배 향상된 것을 확인할 수 있었다. Recently, many applications with grapheneoxide (GO) have been reported. But GO membrane for water treatment has not been developed. In this study we prepared polyvinylidene difluoride (PVdF) nanofiber/GO hybrid membrane (FG) for the microfiltration application. The PVdF substrate membrane was prepared by using the electrospinning method with a solution of PVdF in N,N-dimethylacetamide (DMAc) and acetone. GO sheets used in this study were prepared by modified Hummer’s method. The PVdF/GO hybrid membrane was finally prepared by spraying the GO solution dispersed in ethanol on the PVdF nanofiber. The successfully prepared FG was thoroughly examined by SEM, Raman, contact angle, porometer and UTM, and water-flux was measured with designed cell (Dead-End Cell). From the contact angle results, it was found that the surface of FG membrane was reformed by hydrophilic property and the water permeability was increased about 2.5 times than that of the nascent PVdF membrane, indicating the possible alternative of the commercial MF membrane.