요건공학을 통한 TRIZ 문제정의

정진하,박영원,Jeong, Jin-Ha,Park, Young-Won 한국생산제조학회 2010 한국생산제조학회지 Vol.25 No.6

Recently, there are many corporations, schools and institutes that apply TRIZ to solve technical problems. However, in reality, only a few cases of brainstorming applications exist in utilizing forty principles of TRIZ due to the difficulty at TRIZ problem definition. In order to facilitate TRIZ applications, this study proposes the utilization of requirement definition and description tool of systems engineering in TRIZ problem definition. No requirement definition exists in general problem types that TRIZ approach is used in implementing system solution. At most of problem situations, TRIZ users reversely infer that certain problem belongs to which requirement definition it is and recommends TRIZ tools to be used for the exact problem definition. This study also proposes TRIZ problem definition method by applying the results of requirement definition process. The application of TRIZ is demonstrated to the general situation with no problem definition where the proposed method enables the proper use of TRIZ.

개념 설계 평가를 위한 제품 품질지수

정진하,박영원,Jeong, Jin-Ha,Park, Young-Won 한국생산제조학회 2010 한국생산제조학회지 Vol.25 No.6

A product system will be improved continually until requirements are satisfied. It is true that considering alternative designs to improve product system is hard work; it is also true that selecting an adequate design idea that represents the needs of stakeholders concerned and meets effectiveness factors properly is not an easy work, either. In the process of driv-ing an idea and designing, which is called Design Phase, there are lots of existing tools for testing the driven idea in DFSS. But, those kinds of tools do not offer the function that helps to select the technically better design idea among alternative design ideas that have the same evaluation level. Moreover it is inappropriate to select adequate alternative design ideas by just verifying only the evaluation table in pugh matrix, since satisfied deviation val-ues are low when there is a too competitive mass product system in a market. Also, for the IT product with short life cycle, faster and more effective testing tool is needed. Therefore, the 'roduct quality index' is suggested in order to select an appropriate candidate design concept for system development that meets requirements by using 'deality concept' pro-vided by TRIZ. According to the result of this research, it is possible to select technically better idea fast and effectively; it is confirmed by applying the approach to the case of LCD BLU (Back Light Unit).

Proteolysis, for What\ulcorner

정진하,Jeong, Jin-Ha 한국통합생물학회 1997 한국동물학회 뉴스레터 Vol.14 No.1

개념 설계 평가를 위한 제품 품질지수

정진하(Jin-Ha Jeong),박영원(Young-Won Park) 한국생산제조학회 2010 한국생산제조학회지 Vol.19 No.4

A product system will be improved continually until requirements are satisfied. It is true that considering alternative designs to improve product system is hard work; it is also true that selecting an adequate design idea that represents the needs of stakeholders concerned and meets effectiveness factors properly is not an easy work, either. In the process of driv-ing an idea and designing, which is called Design Phase, there are lots of existing tools for testing the driven idea in DFSS. But, those kinds of tools do not offer the function that helps to select the technically better design idea among alternative design ideas that have the same evaluation level. Moreover it is inappropriate to select adequate alternative design ideas by just verifying only the evaluation table in pugh matrix, since satisfied deviation val-ues are low when there is a too competitive mass product system in a market. Also, for the IT product with short life cycle, faster and more effective testing tool is needed. Therefore, the 'product quality index' is suggested in order to select an appropriate candidate design concept for system development that meets requirements by using 'ideality concept' pro-vided by TRIZ. According to the result of this research, it is possible to select technically better idea fast and effectively; it is confirmed by applying the approach to the case of LCD BLU (Back Light Unit).

요건공학을 통한 TRIZ 문제정의

정진하(Jin-Ha Jeong),박영원(Young-Won Park) 한국생산제조학회 2010 한국생산제조학회지 Vol.19 No.4

Recently, there are many corporations, schools and institutes that apply TRIZ to solve technical problems. However, in reality, only a few cases of brainstorming applications exist in utilizing forty principles of TRIZ due to the difficulty at TRIZ problem definition. In order to facilitate TRIZ applications, this study proposes the utilization of requirement definition and description tool of systems engineering in TRIZ problem definition. No requirement definition exists in general problem types that TRIZ approach is used in implementing system solution. At most of problem situations, TRIZ users reversely infer that certain problem belongs to which requirement definition it is and recommends TRIZ tools to be used for the exact problem definition. This study also proposes TRIZ problem definition method by applying the results of requirement definition process. The application of TRIZ is demonstrated to the general situation with no problem definition where the proposed method enables the proper use of TRIZ.

우모 케라틴 분해세균의 분리, 특성 및 우모 분해산물의 식물 생육촉진 효과

정진하 ( Jin Ha Jeong ),이나리 ( Na Ri Lee ),김정도 ( Jeong Do Kim ),전영동 ( Young Dong Jeon ),박기현 ( Ki Hyun Park ),오동주 ( Dong Joo Oh ),이충열 ( Chung Yeol Lee ),손홍주 ( Hong Joo Son ) 한국환경과학회 2010 한국환경과학회지 Vol.19 No.10

This study was conducted to isolate and characterize a novel feather-degrading bacterium producing keratinase activity. A strain K9 was isolated from soil at poultry farm and identified as Xanthomonas sp. K9 by phenotypic characters and 16S rRNA gene analysis. The cultural conditions for the keratinase production were 0.3% fructose, 0.1% gelatin, 0.04% K2HPO4, 0.06% KH2PO4, 0.05% NaCl and 0.01% FeSO4 with an initial pH 8.0 at 30℃ and 200 rpm. In an optimized medium containing 0.1% chicken feather, production yield of keratinase was approximately 8-fold higher than the yield in basal medium. The strain K9 effectively degraded chicken feather meal (67%) and duck feather (54%), whereas human nail and human hair showed relatively low degradation rates (13-22%). Total free amino acid concentration in the cell-free supernatant was about 25.799 mg/l. Feather hydrolysate produced by the strain K9 stimulated growth of red pepper, indicating Xanthomonas sp. K9 could be not only used to increase the nutritional value of chicken feather but also a potential candidate for the development of natural fertilizer applicable to crop plant soil.

6가 크롬 및 유류 제거를 위한 우모 폐기물의 이용가능성

정진하 ( Jin Ha Jeong ),이나리 ( Na Ri Lee ),박성보 ( Sung Bo Park ),정성윤 ( Seong Yun Jeong ),박근태 ( Geun Tae Park ),손홍주 ( Hong Joo Son ) 한국환경과학회 2012 한국환경과학회지 Vol.21 No.3

We investigated usefulness of chicken feather as bioadsorbent for removal of hexavalent chromium[Cr(Ⅵ)] and oil from aqueous solution. Chicken feather was chemically treated with DTPA, EDTA, NaOH and SDS, respectively. Among them, EDTA was the most effective in adsorbing Cr(Ⅵ). Cr(Ⅵ) uptake by chicken feather was increased with decreasing pH; the highest Cr(Ⅵ) uptake was observed at pH 2.0. By increasing Cr(Ⅵ) concentration, Cr(Ⅵ) uptake was increased, and maximum Cr(Ⅵ) uptake was 0.34 mmol/g. Cr(Ⅵ) adsorption by chicken feather was well described by Freundlich isotherm than Langmuir isotherm and Freundlich constant(1/n) was 0.476. As the concentration of chicken feather was increased, Cr (Ⅵ) removal efficiency was increased but Cr(Ⅵ) uptake was decreased. Most of Cr(Ⅵ) was adsorbed at early reaction stage(1 h) and adsorption equilibrium was established at 5 h. On the other hand, chicken feather adsorbed effectively oils including bunker-A and bunker-C. In conclusion, our results suggest that chicken feather waste could be used to remove heavy metal and oil; it is a potential candidate for biosorption material.

벡터화된 SIMD 프로그램어블 통합 셰이더를 위한 특수 함수 유닛 설계

정진하(Jin-Ha Jung),김경섭(Kyeong-Seob Kim),윤정희(Jeong-Hee Yun),서장원(Jang-Won Seo),최상방(Sang-Bang Choi) 大韓電子工學會 2010 電子工學會論文誌-SD (Semiconductor and devices) Vol.47 No.5

현실감 있는 3차원 그래픽 영상을 지원하기 위해서는 3차원의 그래픽 데이터를 기반으로 사실감을 부여하여 2차원 영상을 생성하는 렌더링 기술과 방대한 양의 데이터에 대해 복잡한 연산을 효율적으로 처리할 수 있는 고성능 그래픽 프로세서가 요구된다. 이로 인해 그래픽 하드웨어는 급속히 발전하였고 기존에 실시간 처리가 불가능했던 여러 고급 렌더링 효과들을 가능하게 하고 있다. 과거에 비해 셰이딩 기술이 발전하면서 사실적인 영상의 렌더링이 가능하게 되었으나 아직 많은 계산 시간을 필요로 하고 있다. 실사와 같은 영상을 빠르게 처리하기 위해서 그래픽 프로세서는 많은 데이터에 대해 복잡한 부동소수점 연산을 효율적으로 처리 할 수 있도록 다수의 연산유닛이 집적되는 방향으로 발전하고 있다. 본 논문에서는 프로그램어블 통합 셰이더 프로세서에서 고성능 3차원 컴퓨터 그래픽 영상을 지원하기 위해 특수 함수 유닛을 설계하고 구현하였다. 설계한 특수 함수 유닛에 대해 기능적 레벨의 시뮬레이션을 하여 동작을 검증 하였으며, FPGA Virtex-4(xc4vlx200)에 구현하여 하드웨어 리소스 사용율과 동작속도를 확인 하였다. Rendering technique generating 2 dimensional image to give reality and high performance graphical processor for efficient processing of massive data are necessary to support realistic 3 dimensional graphical image. Recently, graphical hardwares have evolved rapidly. This enables high quality rendering effect that we were unable to process in realtime. Improving shading technique enabled us to render realistic images but still much time is required for this process. Multiple operational units are being integrated in a graphical processor for effective floating point operation using massive data to process almost real looking images. In this paper, we have designed and implemented a special functional unit to support high quality 3 dimensional computer graphic image on programmable integrated shader processor. We have done evaluation through functional level simulation of designed special functional unit. Hardware resource usage rate and execution speed are measured implementing directly on FPGA Virtex-4(xc4vlx200).

잠재적 생균제로서 식물 젖산균의 분리 및 특성

김정도 ( Jeong Do Kim ),박성보 ( Sung Bo Park ),이나리 ( Na Ri Lee ),정진하 ( Jin Ha Jeong ),이희섭 ( Hee Seob Lee ),황대연 ( Dae Youn Hwang ),이종섭 ( Jong Sup Lee ),정성윤 ( Seong Yun Jeong ),손홍주 ( Hong Joo Son ) 한국미생물생명공학회 2011 한국미생물·생명공학회지 Vol.39 No.3

Plant lactic acid bacteria were isolated from plant-associated fermentative foods and crops, and their probiotic properties were investigated. Isolates K27 and O2 were isolated from Kimchi and onion, and identified as Lactobacillus plantarum on the basis of 16S rRNA gene analysis. The two strains were highly resistant to acid (an MRS broth at pH 2.5), where the survival rates of L. plantarum K27 and L. plantarum O2 were 90.2% and 97.3%, respectively. L. plantarum K27 and L. plantarum O2 also showed high bile resistance to 0.5% oxgall, with a more than 70% survival rate. They showed an inhibitory effect against pathogenic strains of Escherichia coli KCCM 40880 and Pseudomonas aeruginosa ATCC 10145. The antibacterial effect of the two strains was probably due to the presence of lactic acid. ACE inhibitory activities of the two strains ranged from 72.8% to 80.6% in MRS broth. Notably, the two strains showed high ACE inhibitory activity (89.2~98.2%) in MRS broth containing 10% skim milk. Antioxidant activity was tested by DPPH radical scavenging activity, with antioxidant activities of the strains being in the range of 56.8~61.5%. The results obtained in this study suggest that L. plantarum K27 and L. plantarum O2 may be potential probiotic starter cultures with applications with fermentative products.

캐쉬 미스와 분기예측 실패를 고려한 명령어 페치 모델의 성능분석

김선모,정진하,최상방,Kim, Seon-Mo,Jeong, Jin-Ha,Choe, Sang-Bang 한국정보과학회 2001 정보과학회논문지 : 시스템 및 이론 Vol.28 No.12

캐쉬 메모리는 명령어와 데이터의 참조시간을 줄이기 위하여 프로세서에 의해 참조되어질 가능성이 높은 주 메모리의 내용을 일시적으로 저장하는 용량이 작고 빠른 메모리이다. 본 논문에서는 슈퍼스칼라 프로세서에 적용될 수 있는 네 가지 명령어 캐쉬 구조에 대하여 캐쉬 미스와 분기예측 실패를 고려한 해석적 모델을 제안하고 성능을 분석하였다. 슈퍼스칼라 구조의 다양한 파라미터들을 정의하여 명령어 페치를 모델링하였으며, 해석적 모델의 타당성을 검증하기 위하여 시뮬레이션을 수행하여 얻은 결과와 비교하였다. 명령어 페치율에 있어서는 분기예측 실패로 인한 영향보다는 캐쉬 미스로 인한 성능저하가 더욱 큰 것으로 나타났다. 본 연구를 통하여 얻은 해석적 모델을 사용하면 시뮬레이션에서는 드러나지 않는 성능제약의 원인에 대한 명확한 규명이 가능하며, 캐쉬 성능에 있어서 캐쉬 미스와 분기예측 실패간의 관계에 대한 정확한 분석이 가능하다. Cache memories are small fast memories used to temporarily hold the contents of main memory that are likely to be referenced by processors so as to reduce instruction and data access time. In this paper, we represent analytical models of instruction fetch process for four types of instruction cache structures that can be used for superscalar processors. In the models, we define various kinds of architectural parameters and take cache miss and branch misprediction into consideration. To prove the correctness of the proposed models, we performed extensive simulations and compared the results with the analytical models. Simulation results showed that the proposed model can estimate the instruction fetch rate accurately within 10% error in most cases. Both analytical model and simulation show that the increase of cache misses reduces the instruction fetch rate more severely than that of branch misprediction does. However, the analytical model can explain the causes of performance degradation which cannot be uncovered by the simulation method only. The model is also able to provide exact relationship between cache miss and branch misprediction for instruction fetch analysis.