http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황산처리된 녹조류 보강 폴리프로필렌 바이오복합재료에 대한 그래핀 첨가영향
장영훈(Young Hun Jang),한성옥(Seong Ok Han),김형일(Hyung Il Kim),심이나(I Na Sim) 한국고분자학회 2013 폴리머 Vol.37 No.4
폴리프로필렌(PP)을 매트릭스로, 황산처리된 녹조류(SGA)를 보강재로 사용한 바이오복합재료(biocomposites)의 기계적 특성을 향상시키기 위해 그래핀(GNP)의 평균입자크기와 첨가량에 따른 SGA/GNP/PP 복합재료를 제조하고 그 특성을 분석하였다. GNP의 첨가량에 의해 굴곡강도 및 충격강도는 점차 감소하는 경향을 나타내었다. 반면에, SGA와 GNP의 영향으로 인해 굴곡탄성률 및 저장탄성률은 크게 증가하였다. 평균입자크기가 5㎛(GNP5)인 크기가 작은 GNP를 보강재로 사용하였을 경우 평균입자크기가 15㎛(GNP15)인 GNP를 보강재로 사용한 복합재료와 비교하여 상대적으로 우수한 기계적 특성을 보였다. 이는 상대적으로 GNP5의 효과적인 분산에 기인한 것이다. 반면에, GNP를 보강재로 사용한 복합재료의 열팽창에 대한 저항 특성은 GNP15와 비교하여 상대적으로 감소한 결과를 나타냈었으며, 이는 열전도 특성이 우수한 GNP5가 상대적으로 넓고 고르게 분포되어있기 때문에 복합재료 전체에 열이 쉽게 전달 되었기 때문으로 해석할 수 있었다. 결과적으로 SGA/GNP/PP 복합소재는 굴곡저항, 저장탄성률, 댐핑특성 등은 충분히 향상되어 범용 바이오컴포지트로 적용가능하였다. To improve the mechanical properties of polypropylene (PP) biocomposites reinforced with sulfuric acid-treated green algae (SGA), SGA/graphite nanoplatelets (GNP)/PP biocomposites were prepared and their properties were evaluated depending on the particle size and content of GNP. The flexural and impact strength of SGA/GNP/PP bio-composites decreased with the addition of GNP, whereas the flexrual and storage moduli were greatly improved with increasing GNP loading. SGA/GNP/PP biocomposites reinforced with GNP5 showed generally better mechanical prop-erties compared to that reinforced with GNP15 mainly due to the improved dispersion of the smaller GNP. SGA/GNP/PP biocomposites reinforced with GNP5 showed a lower resistance to the thermal expansion because the relatively uni-form dispersion of smaller GNP was responsible for the effective heat transfer to the polymer matrix. As a result, SGA/GNP/PP biocomposite was acceptable for the general purpose application due to the improved flexural resistance, storage moduli, and damping characteristics.
셀룰라아제에 의한 지류문화재 보존에 있어서 금속이온 효과
장영훈 ( Young Hun Jang ) 한국공업화학회 2003 공업화학 Vol.14 No.2
Avicel PH 101의 가수분해가 20 mM의 Mg^++, Cd^++, Zn^++, Ba^++, Ca^++, Hg^++, Pb^++와 같은 금속이온 존재 하에 Trichoderma viride에서 분리한 endoglucanase I, exoglucanase Ⅱ와 endo-exo 혼합요소(1 : 1, weight ratio)에 의하여 수행되었다. 가수분해 시 Mg^++, Ba^++와 Ca^++첨가는 상대적인 총환원당(relative TRS)을 증가시켰으며, Zn^++, Hg^++과 Pb^++의 첨가는 총 환원당을 크게 감소시켰다. Ba^++는 최대 활성물질로, Hg^++는 최대활성 저해물질로 나타났다. Endo I은 exo Ⅱ보다 이들 금속이온의 영향을 더 크게 받는 것으로 나타났다. 활성 저해 금속이온인 Zn^++, Hg^++과 Pb^++의 존재 하에 셀롤라아제로 처리한 고서적의 재생펄프와 종이(intact paper)의 물리적 강도가 측정되었으며, Hg^++과 Pb^++이 존재 할 경우 물리적 강도의 저하를 초래하지 않았다. 이들 결과로부터 Hg^++과 Pb^++는 지류문화재 보존에 있어서 셀롤라아제에 의한 손상을 막을 수 있는 효과적인 물질로 나타났다. The hydrolysis of Avicel PH 101 was performed by endoglucanase 1, exoglucanase Ⅱand their mixture from Trichoderma viride in the presence of 20 mM metal ions such as Mg^++, Cd^++, Zn^++, Ba^++, Ca^++, Hg^++, Pb^++. The addition of Mg^++, Ba^++, and Ca^++ on hydrolysis of Cellulose caused to increase on the total reducing sugar (TRS). On the other hand, significant decrease of TRS on the hydrolysis was observed with Zn^++, Hg^++ and Pb^++. The Ba^++ was the most stimulating metal ion whereas Hg^++ was the most inhibiting metal ion. Endo I was mere sensitive to these metal ions than exe Ⅱ. The physical strength of recycling Pulp and intact paper of old book treated by cellulase components(endo 1, exo Ⅱ and their mixture) was measured in the presence of inhibitory metal ion(Zn^++, Hg^++, Pb^++). And the physical strength was not decreased in the presence of Hg^++, Pb^++. From the experimental results, it was found that metal ions such as HB^++, Pb^++ were more efficient to prevent damage of paper cultural properties by cellulase.
도로, 관망의 형상 및 속성정보를 고려한 유지보수 우선순위 결정 방법
장영훈 ( Jang Young-hoon ),박원영 ( Park Wonyoung ) 한국건축시공학회 2023 한국건축시공학회 학술발표대회 논문집 Vol.23 No.1
Due to the deterioration of infrastructure, the importance of maintenance is continuously increasing. Therefore, an integrated maintenance method for various facilities is required. In this study, a maintenance priority determination method for integrated maintenance of roads and pipe network facilities was developed. It is possible to analyze attribute information by using GIS data of roads and pipe networks, and shape information can be used. This information is derived as quantitative figures for determining maintenance priorities. In the future, it is expected that facility maintenance can be further advanced in connection with maintenance method and quantity information for each facility.