http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
양파의 겨울철 적산온도 상승이 생육 및 분구에 미치는 영향
이희주 ( Hee Ju Lee ),위승환 ( Seung Hwan Wi ),안세웅 ( Se Woong An ),장윤아 ( Yoon Ah Jang ),이진형 ( Jin Hyung Lee ),이희수 ( Hee Su Lee ),전희 ( Hee Chun ),이상규 ( Sang Gyu Lee ),김성겸 ( Sung Kyeom Kim ) 한국농업기계학회 2019 한국농업기계학회 학술발표논문집 Vol.24 No.1
양파(Allium sepa L.)는 전 세계적으로 소비량이 많은 작물로 국내 1인당 소비량도 25kg 이상으로 많고, 국내 재배면적(26,425ha, ’18년)도 증가 추세로 안정적 생산이 중요하다. 양파는 노지에서 재배되는데 보통 10월경에 정식하여 다음해 6월경에 수확하기 때문에 생산량은 겨울철 환경조건의 영향을 크게 받는다. 양파의 구비대가 원활하게 되기 위해서는 저온기간이 어느 정도 필요한데, 고온조건이 되면 여러 가지 생리장해 발생이 되는 것으로 알려져 있다. 특히 우리나라는 지난 100년 동안 다른 국가보다 평균온도 상승폭이 커서 기후변화시나리오 RCP 8.5 조건(2100년이 되면 현재보다 온도가 약 6.0°C 상승하고, 강수량이 20% 증가하며, CO2농도는 940μmol·mol-1)을 채택하여 대응책을 마련하고 있다. 따라서 본 실험은 양파 정식 후부터 외기조건과 외기보다 3.0°C, 6.0°C 고온이 되었을 때 양파의 생육과 분구 발생에 미치는 영향을 분석하고자 2018년과 2019년 2년간 비교분석하였다. 2018년과 2019년 재배기간(11.7~이듬해 3.20)의 적산 온도는 각각 248.8°C, 453.1°C로 2018년과 비교하여 2019년이 204.3°C가 높았으며, 일평균기온이 1.5°C 더 높았다. 그 결과, 외기조건에서 자란 양파는 온도가 높았던 2019년이 2018년보다 초장, 엽초경 및 엽수가 증가하는 것으로 나타났고, 외기온도보다 6°C 고온조건에서 자란 양파가 외기조건이나 외기보다 3°C 고온조건에서 자란 양파보다 큰 것으로 나타났다. 그러나 외기조건보다 3°C, 6°C 고온조건에서 자란 양파의 년도별 생육량에는 통계적인 유의성이 없었다. 양파의 분구율에 있어서는 차이를 보여 외기조건에서는 1.4% 발생하였으나, 외기+3°C는 5.1%, 외기+6°C조건에서는 24.1%로 온도가 상승함에 따라 분구 발생율이 크게 증가하였다. 따라서 양파 재배시 적산온도가 많았던 2019년에 외기조건에서 자란 양파가 2018년보다 초장과 엽초경이 증가하는 것으로 나타났지만, 외기조건 대비 3°C, 6°C 고온조건에서는 적산온도가 양파의 생육에 미치는 영향이 적은 것으로 나타났다. 그러나 양파의 분구 발생율에 있어서는 외기조건보다 6°C 고온조건에서 2018년 1% 미만이었으나 적산온도가 높았던 2019년에는 24.1%가 발생하여 적산온도의 증가가 분구발생에 큰 영향을 미치는 것으로 나타나 이에 대한 대응책이 필요하다.
적심 여부와 발근촉진제 처리가 고추묘의 발근 및 생장에 미치는 영향
이희주(Hee-Ju Lee),이상규(Sang-Gyu Lee),이정명(Jung-Myung Lee) (사)한국생물환경조절학회 2009 시설원예‧식물공장 Vol.18 No.4
grafting;rooting;rootstock적심 및 rootone 처리가 고추 10품종의 발근력에 미치는 영향을 조사한 결과, 모두 정상적으로 발근되었으나 품종간에 큰 차이를 보였다. 즉 ‘Gukbo’와 ‘Chungyang’ 등은 발근력이 낮은 반면, 대목 이용 가능성이 높은 ‘Geumsang’ 등은 매우 높았다. 발근촉진제 rootone 처리는 모든 품종의 발근을 현저히 증가시켜 높은 실용성을 보여주었다. 또한 적심에 따른 발근 지연 현상은 rootone 처리로 거의 완벽하게 보완될 수 있었다. 선발된 대목 10품종과 접수 3품종을 적심과 IBA 단용 또는 병행처리 후 발근력을 검토한 결과, 대목 중에서는 ‘Tantan’이 가장 높았고, ‘Konesian Hot’과 ‘Wonkwang 1호’도 높았다. 또한 공시된 10개 대목은 대면적에 일반재배 되는 품종인‘Manita’, ‘Chungyang’, ‘Nokkwang’보다 발근력이 높았다. IBA 처리는 발근력을 다소 향상시켰으나 rootone 처리에 비해 효과가 뚜렷하지 않았다. In order to find out the feasibility of producing grafted red pepper (Capsicum annuum L.) seedlings with root-removed rootstocks, rooting response and subsequent seedling growth was also evaluated. Pinching the top of pepper seedlings for cutting significantly reduced the rooting of cuttings in 10 commercial hot pepper cultivars. Normal rooting was obtained from all commercial cultivars even though the rooting response varied considerably among cultivars. Poor rooting was observed in ‘Gukbo’ and ‘Chungyang’. Rootone treatment significantly promoted rooting in all tested cultivars and the decrease of rooting response caused by pinching could be fully recovered by rootone treatment. Among the ten commercial rootstocks developed for hot pepper grafting, ‘Tantan’ showed the best rooting response followed by ‘Konesian Hot’ and ‘Wonkwang 1’. Most of these rootstocks, however, showed higher rooting response as compared to the popular commercial cultivars, ‘Manita’, ‘Chungyang’, and ‘Nokkwang’. Pasting of IBA at cut surface promoted the rooting of pepper cuttings, but the effect was not quite pronounced as compared to rootone treatment.
Service Design and Service Model for Smart Plug
Lee, Hee Ju(이희주),Yoon, Se Hwan(윤세환),Kim, Yong Se(김용세) 한국전시산업융합연구원 2015 한국과학예술융합학회 Vol.19 No.-
A lot of electrical energy is used in our daily life. While energy saving concerns are overall, consumption practices of people in general are very different. People want to control their energy use and by knowing the amount of energy they use. Smart plug is a new device that measures electricity usage through each plug at an outlet with on/off control. User experience for electrical devices in regards to electricity usage should be newly designed. In this study, based on the survey, personas have been devised and their energy use experience in relation with smart plugs have been designed. Service models have been designed as well. By designing service with smart plug, user could enhance the experience of energy usage and saving and energy consumption practices could be improved in a sustainable manner.