http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Mechanochemical 표면처리한 Fly Ash 혼화 Concrete의 제조
이형직,구자훈,유인상,송두규,정해경,권혁병,윤상옥,이형복,이홍림,Lee, Hyung-Jik,Koo, Ja-Hun,Yoo, In-Sang,Song, Doo-Gyoo,Joung, Hae-Kyoung,Kwon, Hyouk-Byoung,Yoon, Sang-Ok,Lee, Hyung-Bock,Lee, Hong-Lim 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.2
채취 그대로의 fly ash(As Received Fly Ash, ARFA)90 wt%와 cement 10 wt%의 혼합물 ball milling 함으로서 mechanochemical processing에 의해 표면 처리한 fly ash(Mechanochemically Surface Treated Fly Ash, MSTFA)를 사용하여 fly ash 혼화 concrete의 강도 증진을 위한 연구를 수행하였다. ARFA에 ball-milling하여 particle size reduction만 발생시킨 fly ash(Ball-mill Processed Fly Ash, BPFA)혼화시의 공시체와 비교하여 동일한 fly ash의 혼화량, 동일한 재령의 압축강도 및 미세구조의 관점에서 고찰하였다. MSTFA를 혼화한 concrete 공시체의 압축강도는 ARFA를 혼화한 것보다 10-20%, BPFA를 혼화한 것보다는 2-7 wt% 상승한 값을 나타내었다. 이 같은 강도 상승은 MSTFA와 cement의 각 입자의 서로에 대한 친화성이 증대되며 이로 인하여 수화물 생성시 cement와 fly ash 입자간의 결합력이 더욱 증가하게 되어 압축강도가 증가하는 것으로 고려된다. Fabrication of high strength structural concrete was investigated by using a mechanochemically Surface Treated Fly Ash(MSTFA) induced by mechanochemical processing through ball-milling of (90 wt% As Recevied Fly Ash(ARFA) + 10wt% cement) mixture, which was compared to the specimen fabricated by using As Received Fly Ash(ARFA) in terms with compressive strength and microstructures. The compressive strength of concrete specimen fabricated by using MSTFA represented 10-20% and 2-7% higher value than that for the case of using ARFA and BPFA in each cases. Increased compressive strength as above mentioned is considered to be caused by mutually increased affinity generated between cement and fly ash during mechanochemical processing.
Mechanochemical Processing(MP)에 의한 Cement-fly Ash 계 Mortar의 제조
이형직,구자훈,유인상,송두규,정해경,권혁병,윤상옥,이형복,이홍림,Lee, Hyung-Jik,Koo, Ja-Hun,Yoo, In-Sang,Song, Doo-Gyoo,Joung, Hae-Kyoung,Kwon, Hyouk-Byoung,Yoon, Sang-Ok,Lee, Hyung-Bock,Lee, Hong-Lim 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.2
Mechanochemical Processing(MP)을 거친 Cement(MPC) 또는 Fly Ash(MPFA)를 사용하여 fly ash 다량 혼화 고강도 mortar의 제조를 위한 연구를 수행하였다. 단순 ball milling processing를 거친 cement(Ball-mill Processed Cement, BPC)와 채취 그대로의 처리하지 않은 fly ash(As Received Fly Ash, ARFA) 혼화시의 공시체와 비교하여 동일한 fly ash의 혼화량(10, 20, 30 wt%), 동일한 재령(7일 및 28일)의 압축강도 및 미세구조의 관점에서 고찰하였다. MPC와 ARFA 및 BPC와 MPFA를 사용한 mortar 공시체가 BPC와 ARFA를 사용한 것보다 각각 5-11% 및 10-20% 상승한 압축강도 값을 나타내었다. 더욱이 MPC와 MPFA의 동시 혼화 mortar 공시체의 압축강도가 fly ash 혼화량 20 wt% 공시체에서 강도 상승률 24%를 나타내었는데 이 값은 MPC 사용에 의한 강도 향상 비율(8%)과 MPFA 혼화에 의한 강도 향상 비율(12%)의 합을 상회하는 synergy 효과를 나다내는 강도 향상율을 나타냈다. 상기의 강도 증진은 MP에 있어서 fly ash와 cement 입자가 혼합되면서 기계적 에너지가 공급되므로 각 입자의 서로에 대한 친화성이 증대되며, 이로 인하여 수화물 생성시 cement와 fly ash 입자간의 결합력이 더욱 증가하게 되어 압축강도가 증가하는 것으로 고려된다. Fabrication of mortar containing fly ash for high strength structural material was investigated by using a Mechanochemically Processed Cement (MPC) and/or Fly Ash (MPFA), which was compared to the specimen (at the same fabrication condition of fly ash adding contents (10, 20 and 30 wt%) and curing time (7 and 28 days)) fabricated by using Ball-mill Processed Cement (BPC) and As Received Fly Ash (ARFA) in terms with compressive strength and microstructures. Mortar specimen fabricated by using MPC and ARFA showed 5-11% higher compressive strength than that in the case of using BPC and ARFA, and mortar specimen by using BPC and MPFA represented 10-20% higher compressive strength than that for the case of using BPC and ARFA. Furthermore, mortar specimen fabricated by simultaneously using MPC and MPFA exhibited about 24% higher value of compressive strength than that for the case of using BPC and ARFA, which was considered to be synergic efficiency in increasing compressive strength. Increased compressive strength as above mentioned is considered to be caused by mutually increased affinity between cement and fly ash induced during mechanochemical Processing(MP).
이형직,조상현,최흥문,Lee, Hyeong-Jik,Jo, Sang-Hyeon,Choe, Heung-Mun 대한전자공학회 2000 電子工學會論文誌-SC (System and control) Vol.37 No.5
본 논문에서는 심장 MRI 영상에서 혈류 윤곽선을 자동으로 추출하는 방법을 제안하였다. 제안한 방법에서는 기존 snake 보다 포획 범위가 넓은 GVF(gradient vector flow) snake를 사용하고, 심장 MRI의 에지 영상에서 GVF 계(field)가 영인 영역의 외곽을 따라 초기점들을 자동 발생시킴으로써, 전문가의 수작업 초기화에 의존하던 기존 방법과는 달리, 유두근으로 인한 요면을 갖는 혈류 윤곽선까지도 자동으로 추출할 수 있도록 하였다. 유두근 돌출로 인한 요면을 가지거나 잡영이 섞여있는 실제 심장 MRI들에 대해 실험하여 혈류 윤곽선을 효과적으로 자동 추출할 수 있음을 확인하였다. In this paper, an automatic extraction of the blood flow contour from cardiac MRI is proposed. By using the GVF snake which has wider capture range than the conventional snake, and by automatically generating the initial points along the outside of the contour of the zero GVF field in the edge image of the cardiac MRI, the blood flow contour can be automatically extracted, even when the contours have boundary concavities due to the papillary muscles, without any manual initialization of the experts. Experiments are conducted on the various real cardiac MRIs including noise and papillary muscles, and the proposed method is proved to be efficient in automatic extraction of the blood contours even if they have the boundary concavities.
이형직,류법모,임수종,장명길,김현기,Lee, H.J.,Ryu, P.M.,Lim, S.J.,Jang, M.K.,Kim, H.K. 한국전자통신연구원 2014 전자통신동향분석 Vol.29 No.4
최근의 플랫폼 기술동향은 웹 기반 혹은 단순 의사소통이 가능한 모바일 플랫폼에서 빅데이터와 인공지능기술이 접목되면서 심층 질의응답이 가능한 차세대 지능형 지식처리 플랫폼으로의 진화가 진행 중이다. 선진국에서는 국가 차원 혹은 글로벌 기업의 주도하에 대형 장기 프로젝트가 진행 중이다. 국가 주도의 프로젝트로는 미국의 PAL, 유럽의 Human Brain, 일본의 Todai 프로젝트가 대표적인 예이며, 글로벌 기업의 경우는 IBM의 Watson, Google의 Knowledge Graph, Apple의 Sir가 대표적인 예이다. 본고에서는 차세대 지능형 플랫폼의 핵심기술인 인간과 기계의 지식소통을 위한 빅데이터 기반의 지식처리 인공지능 소프트웨어 기술의 개념과 국내외 기술 및 산업, 지식재산권 동향 등을 살펴보고 산업계 활용방안 및 발전방향에 대해 논하고자 한다.
이형직,조은진,정선구,이광희,Lee, H.J.,Cho, E.J.,Jeong, S.K.,Lee, K.H. 한국전자통신연구원 2021 전자통신동향분석 Vol.36 No.5
To reduce mobile network deployment costs and expand service coverage, mobile infrastructure sharing is becoming increasingly important. This paper introduces the concept and potential benefits of mobile infrastructure sharing as documented in the existing literature. Then, the current status of significant cases of mobile infrastructure sharing in major overseas countries is examined. Finally, sharing 5G infrastructure in rural areas in Korea is introduced. The Korean case is expected to complete national 5G coverage successfully without involving negative competition.
이형직(Hyung-jik Lee),정슬(Seul Jung) 大韓電子工學會 2011 電子工學會論文誌-SC (System and control) Vol.48 No.6
본 논문에서는 역진자 시스템과 이동로봇 시스템의 두 시스템으로 구성된 두 바퀴 구동 이동로봇의 구현 및 제어에 대해 논한다. 제어 목적은 균형을 유지하며 이동하는 것이다. 밸런싱 로봇은 한 점에서 회전이 가능하고 바닥으로 부터의 외란에 강건한 균형을 유지한다. 국부 및 전역 좌표계에서의 제어방식의 시뮬레이션을 수행하였다. 로봇이 대칭을 이루도록 만들어졌기 때문에 균형과 주행제어에 간단한 선형 제어기를 사용하였다. 기울어진 각도를 추출하기 위해 자이로와 기울기 센서를 융합하여 사용하였다. 주어진 원형 경로를 주행하는 실험을 수행하였다. This paper presents implementation and control of a two wheeled mobile robot system which consists of two systems an inverted pendulum system and a mobile robot system. Control purpose is to regulate its balancing and navigation. The balancing robot has advantages of one point turning and robust balancing against disturbances from the ground. Simulation studies of local and global control methods are performed. Since the robot is implemented to have a symmetrical structure simple linear control algorithms are used for balancing and navigation. Low cost sensors such as gyro and tilt sensor are fused together to detect the inclined angle. Experimental studies of following desired circular trajectory are conducted.