http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이지형,오종윤,박익수,Lee Ji-Hyung,Oh Jong-Yun,Park Ik-Soo 한국군사과학기술학회 2004 한국군사과학기술학회지 Vol.7 No.4
A simplified test rig to simulate high-altitude environments was designed by analyzing the AEDC (Arnolds Engineering Development Center) report regarding simulated altitude testing. The test rig consists of a vacuum chamber, a supersonic nozzle connected to a cold-gas supplier and a diffuser. The preliminary tests were conducted to validate the AEDC design concepts. The test results showed that sub-atmospheric pressure(1.0psia) environments were realized inside the vacuum chamber and the design concepts were confirmed.
소형 초음속 디퓨저를 이용한 고고도환경 모사에 대한 시험적 연구
이지형,오종윤,변종렬,Lee Ji-Hyung,Oh Jong-Yun,Byun Jong-Ryul 한국군사과학기술학회 2004 한국군사과학기술학회지 Vol.7 No.4
Experimental study was conducted on cylindrical supersonic diffuser in order to investigate the effects of the ratios of diffuser area to nozzle throat area (Ad/At), diffuser area to nozzle exit area (Ad/Ae), nozzle exit area to its throat area (Ae/At), and diffuser length to its diameter (L/D), the free volume of vacuum chamber, and the relative distance between nozzle exit and diffuser inlet on the diffuser performance. The study showed that the minimum diffuser starting pressure (Po/Pa)st increased monotonically with increase in (Ad/At) as predicted by the normal shock and momentum theory models and the volume of vacuum chamber affected vacuum pressure level during diffuser operation at lower value of (Ad/Ae). The results of this investigation will be utilized in the design of real-scale high-altitude simulation test facility.
이지형,홍성걸,Lee, Ji-Hyung,Hong, Sung-Gul 한국공간구조학회 2015 한국공간구조학회지 Vol.15 No.2
Ultra High Performance Fiber Reinforced Concrete (UHPFRC) has a outstanding tensile hardening behaviour after a crack develops, which gives ductility to structures. Existing shear strength model for fiber reinforced concrete is entirely based on crack opening behavior(mode I) which comes from flexural-shear failure, not considering shear-slip behavior(mode II). To find out the mode I and mode II behavior on a crack in UHPFRC simultaneously, maximum shear strength of cracked UHPFRC is investigated from twenty-four push-off test results. The shear stress on a crack is derived as variable of initial crack width and fiber volume ratio. Test results show that shear slippage is proportional to crack opening, which leads to relationship between shear transfer strength and crack width. Based on the test results a hypothesis is proposed for the physical mechanics of shear transfer in UHPFRC by tensile hardening behavior in stead of aggregate interlocking in reinforced concrete. Shear transfer strength based on tensile hardening behavior in UHPFRC is suggested and this suggestion was verified by comparing direct tensile test results and push-off test results.
이지형(Ji-Hyung Lee),이형우(Hyung-Woo Lee),김대현(Dae-Hyun Kim),김태윤(Tai-Yun Kim) 한국정보과학회 1995 한국정보과학회 학술발표논문집 Vol.22 No.2A
유한 요소 분석법은 많은 과학 분야에서 사용되고 있다. 의학 부문에서, 단층 사진은 인체에서도 접근할 수 없는 기관이나 뼈의 3차원 볼륨 데이타를 제공한다. 이 볼륨 데이타로 유한 요소를 생성하면 현실 세계에서 불가능한 여러 실험이 가능하게 된다. 인체는 여러 재질로 이루어져 있고 단층 사진도 이를 반영한다. 여러 재질이 동시에 존재하는 유한 요소 모델을 만들기 위해서는 재질간 연결이 매우 중요하다. 본 연구에서는 단층 사진을 이용한 3 차원 유한 요소 생성기를 제안한다. 제안된 생성기는 단층 사진 별로 2 차원 유한 요소를 생성하고, 단층 사진간에 2 차원 유한 요소를 연결하여 3 차원 유한 요소를 생성한다. 단층 사진에서의 재질간 경계를 공유시킴으로서 여러 재질들이 유기적으로 연결된 유한 요소로 구축하였고, 공간적으로 일관성을 유지할 수 있도록 생성 과정중 상호 작용을 통하여 발생 가능한 부적절한 요소의 수를 줄였다.
이지형(Ji Hyung Lee),고태조(Tae Jo Ko),백대균(Dae Gyung Baek) Korean Society for Precision Engineering 2009 한국정밀공학회지 Vol.26 No.2
This paper is related to MQL (Minimum Quantity Lubrication) milling process, which is one of the environmentally friendly cuttings. The objective is to compare MQL milling process with conventional cutting fluid systems. To this end, machinability of MQL milling process was investigated, followed by the cost evaluation. Cutting force, surface roughness, tool wear, and cutting temperature were compared with each cutting fluid method. Consequently, total production costs wear evaluated with the mathematical models in terms of machining cost and cutting fluid loss.
이지형 ( Ji Hyung Lee ),김상원 ( Sang Won Ghyme ),박찬종 ( Chan Jong Park ) 한국감성과학회 1999 추계학술대회 Vol.1999 No.-
컴퓨터 그래픽스에서 인간의 얼굴 표정을 생성하는 것은 고전적인 주제중의 하나이다. 따라서 관련된 많은 연구가 이루어져 왔지만 대부분의 연구들은 특정 모델을 이용한 얼굴 표정 애니메이션을 제공하였다. 이는 얼굴 표정에는 얼굴 근육 정보 및 부수적인 정보가 필요하고 이러한 정보는 3D 얼굴 모델에 종속되기 때문이다. 본 논문에서는 일반적인 3D 얼굴 모델에 근육을 설정하고 기타 정보를 편집하여, 다양한 3D 얼굴모델에서 표정 애니메이션이 가능한 도구를 제안한다.
이지형 ( Ji Hyung Lee ),김상원 ( Sang Won Ghyme ),박찬종 ( Chan Jong Park ) 한국감성과학회 1999 추계학술대회 Vol.1999 No.-
최근 많은 영화나 컴퓨터 애니메이션에는 인간형 3차원 캐릭터의 애니메이션이 등장하고 있다. 이러한 인체 애니메이션에는 인체의 움직임, 손가락이나 얼굴표정이 포함된다. 대부분의 경우에 자연스러운 인체의 움직임을 추적하기 위해 모션캡쳐를 이용하고 있지만, 이 경우 손가락이나 얼굴표정은 제외되므로 이에 대한 추가 작업이 필요하게 된다. 본 논문에서는 모션캡쳐 장비, 사이버글러브와 Face Tracker를 통합한 시스템을 소개하며, 이 시스템을 이용하여 실시간으로 캐릭터 애니메이션이 가능하게 한다.