화학적 처리에 의한 PAN 계 활성탄소섬유 ( ACF ) 의 세공특성

이종규,이병희,홍익표,이규동,김제영 ( J . G . Lee,B . H . Lee,I . P . Hong,K . D . Lee,J . Y . Kim ) 한국화학공학회 1995 화학공학의이론과응용 Vol.1 No.2

석고계 바인더를 활용한 습도도절 세라믹 보드의 특성 평가

이종규,김태연,Lee, Jong-Kyu,Kim, Tae-Yeon 한국재료학회 2018 한국재료학회지 Vol.28 No.1

Active clay, bentonite and zeolite were used as porous materials for humidity controlling ceramic boards. The specific area and the pore volume of active clay were higher than bentonite and zeolite. The flexible strength of the gypsum board decreased with an increasing amount of porous material, and the flexible strength was lowest when active clay with a higher specific surface area than others porous materials was added. The specific surface area and total pore volume of ceramic boards containing porous material were highest at $102.25m^2/g$, $0.142cm^3/g$, respectively, when the active clay was added. In addition, as the amount of added porous materials increased, the specific surface area and total pore volume of the ceramic board increased, but the average pore diameter decreased. The addition of s porous materials with a high specific area and a large pore volume improved the moisture absorptive and desorptive performance of the ceramic board. Therefore, in this experiment, the moisture absorptive and desorptive properties were the best when active clay was added. Furthermore, as the amount of added porous materials increased, the moisture absorptive and desorptive properties improved. When 70 mass% of active clay was added to ${\alpha}$-type gypsum, the hygroscopicity was the highest, about $300g/m^2$, in this experiment.

무기질 충진재와 폴리우레탄을 활용한 유·무기 복합 단열소재의 특성 평가

이종규,소정섭,노현경,Lee, Jong-Kyu,Soh, Jung-Sub,Noh, Hyun-Kyung 한국재료학회 2012 한국재료학회지 Vol.22 No.11

Recently, inorganic-organic hybrid materials have attracted much attention not only for their excellent thermal conductivity but also for their flame retardant properties. In this study, the properties of organic-inorganic hybrid insulating materials using inorganic fillers and polyurethane foam with different foaming conditions have been investigated. The addition of 1.5 wt% water to polyurethane as foaming agent shows the best foaming properties. The pore size was decreased in the foaming body with increasing of the $CaCO_3$ addition. The apparent density and thermal conductivity were increased by increasing the $CaCO_3$ addition. With an increasing amount of $CaCO_3$ powder, the flame retardant property is improved, but the properties of thermal conductivity and apparent density tend to decrease. When the addition of fine particles of $CaCO_3$, the apparent density and thermal conductivity were increased and, also, with the addition of coarse particles over $45{\mu}m$ in size, the apparent density and thermal conductivity were increased as well. In this study, the adding of $CaCO_3$ with average particle size of $27{\mu}m$ led to the lowest thermal conductivity and apparent density. After evaluation with different inorganic fillers, $Mg(OH)_2$ showed the highest thermal conductivity; on the other hand, $CaCO_3$ showed the lowest thermal conductivity.

재생미분말의 흡착특성과 유동특성

이종규,추용식,Lee, Jong-Gyu,Chu, Yong-Sik 한국시멘트협회 2006 시멘트 심포지움 Vol.33 No.-

부분상태 궤환제어를 이용한 비선형 천정크레인의 진자각제어

이종규,이상룡,Lee, Jong-Kyu,Lee, Sang-Ryong 대한기계학회 1997 大韓機械學會論文集A Vol.21 No.6

The purpose of this study is to design an anti-sway motion for industrial overhead cranes which transport objects on a horizontal plane by adjusting movements of a trolley motor and a girder motor. The movement of a hoist motor has not been considered at this time since its role was assumed to move objects only vertically, therefore, not to affect the swing motion of objects. The dynamic behavior of the swing motion shows nonlinear characteristics, which makes the design of anti-sway motion controller difficult. First of all, the nonlinear state equation for the motion of industrial overhead cranes has been derived. Then they have been linearized about normal operating states determined by the dynamic characteristics of motor motion-acceleration, constant speed, and deceleration, and deceleration, during transportation. The partial state feedback control algorithm based on this linearized state equation has been developed on order to suppress the swing motion. The simulation results have demonstrated satisfactory performance of the proposed controller.

클링커 제조 조건에 따른 수용성 6가 크롬 용출 특성

이종규,추용식,송훈,Lee, Jong-Kyu,Chu, Yong-Sik,Song, Hun 한국재료학회 2011 한국재료학회지 Vol.21 No.12

One of the trace constituents included in cement clinker, chromium, has become prominent and highly noticed lately as a social issue both inside and outside of this country because it affects the human body negatively. The purpose of the present study was to investigate leaching properties of water-soluble hexavalent chromium by different manufacturing conditions of cement clinker. Raw materials were prepared to add different $SiO_2$, $Al_2O_3$ and $Fe_2O_3$ sources. After the raw materials, such as limestone, sand and clay, iron ore was pulverized and mixed, and the raw meal was burnt at $1450^{\circ}C$ in a furnace with an oxidizing atmosphere. Leaching of soluble hexavalent chromium showed a tendency to decrease with an increasing LSF and IM. However, leaching of soluble hexavalent chromium increased with an increasing S.M. Alkali contents of iron source minerals is closely related to the leaching properties of soluble hexavalent chromium. Green sludge has the highest content of alkali added; leaching of water-soluble hexavalent chromium was mostly high. In order to reduce the water-soluble hexavalent chromium in cement, reducing the alkali content in raw materials is important.

C₃A-CaSO₄·2H₂O 계의 수화반응에 미치는 석회석 미분말의 영향

이종규,추용식,송훈,Lee, Jong-Kyu,Chu, Yong-Sik,Song, Hun 한국세라믹학회 2011 한국세라믹학회지 Vol.48 No.6

In this work, effects of limestone powder on hydration of $C_3A-CaSO_4{\cdot}2H_2O$ system was discussed based on the XRD Quantitative analysis, and the possibility of Delayed Ettringite Formation was also discussed. The early hydration of $C_3A$ was delayed by addition of $CaCO_3$ powder. The delay effect was enhanced by increasing of $CaCO_3$ content and finer powder of $CaCO_3$ addition. After consumption of $CaSO_4{\cdot}2H_2O$, the reaction of $CaCO_3$ is started. Delayed Ettringite Formation would take place because monosulfoaluminate is not stable in presence of $CaCO_3$. In order to prevent the delayed ettringite formation in $C_3A-CaSO_4{\cdot}2H_2O-CaCO_3$ system, the reduction of monosulfoaluminate formation is important. Therefore, by increasing the amount of $CaCO_3$ addition and finer $CaCO_3$ powder addition, the delayed ettringite formation can be prevented.

잉어(Cyprinus carpio)로부터 분리된 Aeromonas hydrophila의 extracelluar proteases 연구

이종규,김종필,최태진,송영환,Lee, Jong-Kyu,Kim, Jong-Pil,Choi, Tae-Jin,Song, Young-Hwan 한국어병학회 1997 한국어병학회지 Vol.10 No.1

Aeromonas hydrophila isolated from the intestine of carp produced several kinds of proteases into the medium. Inhibitor assay with the culture supernatant of A. hydrophila showed that there were major metalloproteases and minor serine proteases. Gelatin SDS-PAGE showed two proteolytic bands. One broad protease band was inhibited by metalloprotease specific inhibitor, EDTA, indicating a metalloprotease. The other was inhibited by serine protease specific inhibitor, PMSF, suggesting a serine protease. The proteolytic activities of both extracellular proteases remained on Gelatin SDS-PAGE after heating at $70^{\circ}C$ for 30 min. However, the major metalloprotease was separated into two proteolytic bands on Gelatin PAGE by gel filtration chromatography on Sephadex G-75. 잉어로부터 분리한 Aeromonas hydrophila는 세포 밖으로 여러 종류의 proteases를 생산한다. A. hydrophila의 배양 상층액을 이용한 inhibitor assay를 통하여, 주된 활성을 나타내는 metallopretease와 약한 활성을 나타내는 serine protease가 있음을 알게 되었다. Gelatin SDS-PAGE를 통하여 두 개의 활성 band가 관찰되었으며, 이 들 중 넓게 퍼진 band는 metalloprotease에 특이하게 작용하는 inhibitor인 EDTA에 의해 활성이 상실되었고 따라서 metalloprotease임을 알 수 있었다. 다른 하나는 serine protease에 특이하게 반응하는 inhibitor인 PMSF에 의해 저해되어 serine protease임을 알 수 있었다. 이러한 두 extracellular protease의 활성은 $75^{\circ}C$에서 30 분간 열을 가한 후에도 Gelatin SDS-PAGE상에 남아있었다. 그런데, 주된 metalloprotease는 Sephadex G-75를 이용한 column chromatography를 거친 후 Gelatin Gel상에서 두 개의 band로 분리되었다.

MgCO₃와 사문석을 사용한 마그네시아 시멘트의 특성평가

이종규,소정섭,추용식,송훈,박지선,Lee, Jong-Kyu,Soh, Jung-Sub,Chu, Yong-Sik,Song, Hun,Park, Ji-Sun 한국재료학회 2012 한국재료학회지 Vol.22 No.11

MgO based cement for the low-temperature calcination of magnesite required less energy and emitted less $CO_2$ than the manufacturing of Portland cements. Furthermore, adding reactive MgO to Portland-pozzolan cement can improve their performance and also increase their capacity to absorb atmospheric $CO_2$. In this study, the basic research for magnesia cement using $MgCO_3$ and magnesium silicate ore (serpentine) as starting materials was carried out. In order to increase the hydration activity, $MgCO_3$ and serpentinite were fired at a temperature higher than $600^{\circ}C$. In the case of $MgCO_3$ as starting material, hydration activity was highest at $700^{\circ}C$ firing temperature; this $MgCO_3$ was completely transformed to MgO after firing. After the hydration reaction with water, MgO was totally transformed to $Mg(OH)_2$ as hydration product. In the case of using only $MgCO_3$, compressive strength was 35 $kgf/cm^2$ after 28 days. The addition of silica fume and $Mg(OH)_2$ led to an enhancements of the compressive strength to 55 $kgf/cm^2$ and 50 $kgf/cm^2$, respectively. Serpentine led to an up to 20% increase in the compressive strength; however, addition of this material beyond 20% led to a decrease of the compressive strength. When we added $MgCl_2$, the compressive strength tends to increase.

전류 구동형 A/D converter 회로 설계

이종규,오우진,김명식,Lee, Jong-Gyu,Oh, Woo-Jin,Kim, Myung-Sik 한국정보통신학회 2007 한국정보통신학회논문지 Vol.11 No.11

[ $0.25{\mu}m$ ] N-well CMOS 공정기술을 이용하여 전류 구동형 A/D 변환기 회로를 설계하였다. 설계된 회로도에는 트랜스컨덕턴스(transconductance), 선형 폴더(folder) 회로 및 1 비트 A/D 변환기로 구성되어 있다. 트렌스컨덕턴스 회로를 이용하여 입력전압을 전류로 변환시킨 후 변환된 전류신호를 이용하여 선형성이 매우 양호한 폴더 회로를 얻을 수 있었다. 폴더 회로를 다단으로 종속접속시킴으로써 n비트 A/D 변환기로 확장할 수 있다. 본 연구에서 설계된 A/D 변환기는 대략 25MSPS으로 구동할 수 있는 6비트 A/D 변환기 회로이다. Multi-stage folding A/D converter circuit with $0.25{\mu}m$ N-well CMOS technology is designed. This A/D converter consists of a transconductance circuit, linear folder circuit and 1bit A/D converter circuit. In H-spice simulation results, linear folder circuits having high linearity can be obtained when the current mode is used instead of voltage mode. And in case of 6bit, the delay time is limited about 40ns. From this results, 6bit 25MSPS A/D converter circuit can be realized.