http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
파장분할다중방식 광통신망의 모니터링 방식에 관한 기술 동향
이우람,조승현,김봉규,박재동,김병휘,Lee, W.R.,Cho, S.H.,Kim, B.K.,Park, J.D.,Kim, B.H. 한국전자통신연구원 2004 전자통신동향분석 Vol.19 No.5
파장분할 다중방식 광통신망(WDM -PON) 운영의 신뢰성을 높이기 위해 각 광 채널의 파장과 파워, 그리고 광섬유로 이어진 링크(link)의 절단상태 등을 모니터링(monitoring)하는 것은 필수적이다. 본 원고에서는 이러한 목적을 효율적이고 경제적으로 달성하기 위해 제시되고 검증되었던 방법들을 pilot tone을 이용한 방법, AWG, FBG, tunable filter 등의 파장 선택성 소자를 이용한 방법, electrical processing을 이용한 방법 등의 세 가지로 나누어 소개한다.
이우람,이춘규,Lee, Woo-Ram,Lee, Chun-Kyu 한국금형공학회 2022 한국금형공학회지 Vol.16 No.1
A lot of research is being done on metal materials to improve the lifespan of molded parts. As a result, excellent mold materials have been developed that withstand high hardness at high temperatures and frictional heat generated from high-speed cutting. In this study, the press mold life of powder high-speed tool steel and general high-speed tool steel was compared. Powdered high-speed steel is composed of alloying elements such as tungsten, maldividene, cobalt, chromium, and vanadium in steel, which improves wear resistance compared to high-hardness and high-speed tool steels. The mold parts of both steel types were manufactured in the same way from heat treatment to machining, and the powder high-speed tool steel was 66HRC and the high-speed tool steel was 61HRC. As a result of the experiment, it was observed that the number of punching of powder high-speed tool steel was improved by 40-50%, and powder high-speed tool steel had fewer impurities, uniform texture, and excellent surface structure. It has a microscopic structure.
이우람(Uram Lee),이재성(Jaesung Lee),이관영(Kwanyoung Lee) 한국자동차공학회 2022 한국자동차공학회 학술대회 및 전시회 Vol.2022 No.11
In this paper, we propose a typical SW architecture for motor-based smart actuators. First, the functional/non-functional requirements of the smart actuator were analyzed. Each functional requirement was mapped to AUTOSAR SW-C. HW-dependent SW-C and independent SW-C were designed separately. HW-independent SW-C is expected to be reu sable in several types of smart actuators. In addition, RTE code generation was performed using SW architecture. It was confirmed that the generated source code was applied to the actual smart actuator to satisfy the basic control performance criteria.
이우람(Wooram Lee),권용범(Youngbeom Kwon) 대한전기학회 2007 대한전기학회 학술대회 논문집 Vol.2007 No.10
본 논문에서는 인간 두뇌와 같이 패턴을 인식할 수 있는 능력을 가진 신경 회로망 모델을 구현하고, 이를 바탕으로 시중의 저렴한 화상 카메라를 이용하여 미 달러화를 인식할 수 있는 시스템을 개발하였다. 제안된 시스템은 저화질 영상에서 캡쳐된 이미지를 이진영상처리 과정을 거치게 함으로써 패턴인식의 정확성 향상을 가져올 수 있었으며, 인공지능의 대표적 알고리즘인 신경회로망을 이용하여 종류별 미 달러화의 세부적인 차이를 감지하고 화폐를 정확하게 인식할 수 있도록 하였다. 각 화폐로 부터 추출해 낸 특징을 신경회로망을 통해 학습시키고, 이를 통해 미 달러 화의 패턴인식 능력을 실험을 통해 확인해본 결과 90%에 가까운 높은 성공률로 정확하게 인식함을 확인할 수 있었다.
Tone Mapping과 Retinex를 이용한 저조도 영상의 색 복원
이우람(Woo-Ram Lee),황동국(Dong-Guk Hwang),전병민(Byoung-Min Jun) 한국정보과학회 2013 정보과학회논문지 : 소프트웨어 및 응용 Vol.40 No.6
광원의 영향이 미약한 환경에서 획득된 저조도 영상은 대비 및 인지적 측면에서 많은 약점을 갖는다. 하지만 이러한 약점의 극복을 위한 저조도 영상의 개선에 관한 연구는 대부분 대비 개선과 잡음제거를 목적으로 한다. 기계 인식과 같은 분야에서 물체가 가지는 원래 색을 복원하는 것은 중요한 과정이기 때문에, 본 논문에서는 저조도 영상을 대상으로 tone mapping 과 retinex기반의 색 복원 기법을 제안한다. 제안한 기법은 tone mapping 함수를 이용하여 영상의 밝기를 증가시킨 후 색 항등성 기법 중 retinex를 이용하여 영상 내 색의 밝기를 복원한다. 기준 영상 기반의 정량적인 성능 평가를 위해 본 논문에서는 Barnard 데이터 셋 기반의 합성 영상을 실험에 사용하였고, 영상들의 색차와 각오차를 성능 평가요소로 사용하였다. 제안한 기법의 객관적인 성능 평가를 위해 기존의 저조도 영상의 색 복원 기법 및 색항등성 기법들과의 비교를 수행했으며, retinex 내부의 파라미터에 따른 성능 평가도 수행되었다. 실험 결과 제안한 기법은 타 색 항등성 기법에 비해 두 성능 평가 요소 측면에서 더 좋은 결과 영상을 생성할 수 있었으며 저조도 영상의 색 복원에 적합함을 보였다. Low-light-level images acquired under some conditions hardly affected by light sources can have some weakness in the perception of objects or the image contrast. However, many studies with the images have tried not to recover original colors of objects in an image, but to improve the image contrast or to remove noises involved in it. Due to automation such as machine recognition, the necessity of recovering the original color becomes more and more increasing these days. For this reason, we propose a method which is combined with a tone mapping and the retinex method in order to restore the original color. The tone mapping is used to control brightness of the image and the retinex to recover the original color. As experimental images, we employed synthesized images, created from the data sets by Barnard; the channel mean of color difference and the angular error was adopted as our evaluation factors. The performance of our method was evaluated by two experiments: the comparison of some well-known color constancy methods and the analysis about control parameters of our method. By the results, the proposed method is shown to be more suitable for the color restoration of the low-light-level images.
저조도 합성 영상을 이용한 색 항등성 기법의 성능 분석
이우람(Woo-Ram Lee),전우경(Woo-Gyoung Jun),전병민(Byoung-Min Jun) 한국엔터테인먼트산업학회 2013 한국엔터테인먼트산업학회 학술대회 논문집 Vol.2013 No.11
영상을 입력으로 사용하는 여러 인식 및 검출 시스템에서 저조도 영상은 시스템의 성능 저하를 일으키는 원인이 된다. 이는 영상 형성 측면에서 보면 저조도 영상은 비 저조도 영상에 비해 큰 색 왜곡을 포함하기 때문이다. 저조도 영상의 색 왜곡 문제를 해결할 수 있는 해법 중의 하나가 색 항등성 기법이다. 본 논문에서는 저조도 환경에 적합한 색 항등성 기법을 분석하기 위하여 기존에 연구되었던 다양한 색 항등성 기법들을 대상으로 저조도 합성 영상 기반의 성능 평가를 수행한다. 합성 영상은 Barnard 데이터 셋 내의 광원 스펙트럼, 물체의 반사계수, 그리고 카메라 센서 반응 함수를 이용하여 생성되었고, 저조도 환경의 모델링을 위하여 부가 광원 효과를 추가하였다. 실험 영상은 구성된 장면에 따른 여러 셋으로 구성되었으며 각 셋에는 여러 저조도 조명으로부터 생성된 영상들이 포함된다. 또한, 성능 평가의 객관성을 위하여 rgb 공간에서의 유클리드 거리와 각 오차를 성능 평가 요소로 이용하였다.
이우람(Lee Woo-ram),이철구(Chul-Ku Lee),김주한(Joo-han Kim),박진성(Jin-Sung Park) 한국생산제조학회 2009 한국공작기계학회 추계학술대회논문집 Vol.2009 No.-
In this research we have performed some experiments to know the possibility of welding dissimilar materials using laser beam by adjusting the power output of 3kw laser. Other conditions of the experiments were as follows : the welding speed was varied in the range between 2m/min and 7m/min, argon gas and helium gas were used as shield gas, the flow value of shield gas was ranged between 101/min and 301/min, and the gap of two materials was ranged between 0㎜ and 0.3㎜. Ascertain the quality of the welded surface, we have done the tensile strength testing, the hardness testing and the microscope observation. As a result, we have found that tensils strength was the highest at the condition of the welding speed of 4, the flow value of 201/min, the gap of two materials 0, and the use of helium gas. Above testings have also showed that the tensile strength was generally satisfactory since the penetration of welding was almost complete due to the thinness of the materials. In addition, the formation of the welded area was excellent when it had the highest tensile strength.