http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
저 신장율 대향류 확산화염에서 화염 특성에 관한 버너 간격 효과
윤진한(Jin-Han Yun),길상인(Sang-In Keel),황동진(Dong-Jin Hwang),최윤진(Yun-Jin Choi),류정인(Jung-In Ryu),박정(Jeong Park) 한국연소학회 2008 KOSCOSYMPOSIUM논문집 Vol.- No.-
Experimental study is conducted to identify the existence of a shrinking flame disk and to clarify its flame characteristics through the inspection of critical mole fraction at flame extinction and edge flame oscillation at low strain rate flames. Experiments are made as varying global strain rate, velocity ratio, and burner distance. The transition from a shrinking flame disk to a flame hole is verified through gradient measurements of maximum flame temperature. The evidence of edge flame oscillation in flame disk is also provided through numerical simulation in microgravity. It is found at low strain rate flame disks in normal gravity that buoyancy effects are importantly contributing to lateral heat loss to burner rim, and is proven through critical mole fraction at flame extinction, edge flame oscillation, and measurements of flame temperature gradient along flame disk surface.
윤진일(Jin I . Yun) 한국농림기상학회 2002 한국농림기상학회지 Vol.4 No.1
Since the rapid urbanization period coincides with the start of global warming, climate data might be contaminated with urbanization effect in Korea. Monthly normals of daily minimum, maximum, and mean temperature of 14 stations were calculated for 1951-1980 and 1971-2000 periods. Differences in two temperature normals were regressed to the natural logarithms of population increase at corresponding 14 cities from 1966 to 1990. The regression models were used to remove potential effects of urbanization from the apparent warming, and to determine the net contribution of global warming to the temperature change in Korea during the recent half century. According to the model calculation, there was little evidence of global warming in the warm season (May through November), while urbanization effect was common in all season except April. Up to 0.5℃ warming of nighttime temperature was found to be induced by urbanization. Cool season temperature was increased by up to 0.6℃ due mainly to the global warming of daytime temperature.
Melting Characteristics of Asbestos Cement Slate on Basicity Control
윤진한(Yun, Jinhan),길상인(Keel, Sangin),민태진(Min, Taijin),이정규(Lee, Chungkyu),장두훈(Jang, Duhun) 한국신재생에너지학회 2010 한국신재생에너지학회 학술대회논문집 Vol.2010 No.11
Asbestos is the collective name for a group of naturally occurring minerals in their fibrous form and hydrous silicates of magnesium and a mineral fiber that has been used commonly in a variety of building construction materials for insulation and as a fire-retardant. Asbestos has been used for a wide range of manufactured goods, because of its fiber strength and heat resistant properties. Nevertheless harmful of asbestos is quite serious. Exposure to airborne friable asbestos may result in a potential health risk because persons breathing the air may breathe in asbestos fibers. Continued exposure can increase the amount of fibers that remain in the lung. Fibers embedded in lung tissue over time may cause serious lung diseases including asbestosis, lung cancer. In this paper, we carried out as fundamental study for dispose of asbestos cement slate safely and perfectly. Melting Temperature of asbestos need to more than 1,520?C and specially asbestos cement slate need more energy than that of pure asbestos. We need to decrease melting temperature of asbestos cement slate for economical efficiency. To the purpose, glass and bottom ash were chosen as additives for basicity control. we analyzed about properties of asbestos cements slate, melting characteristics on the additives ratio and temperature. We confirmed about harmlessness of melting slag through analysis of scanning electron microscope(SEM) and x-ray diffractometer(XRD).
윤진한(Jin Han Yun),길상인(Sang In Keel),전민규(Min Kyu Jeon),최영곤(Young Kon Choi),김민수(Min Su Kim) 한국열환경공학회 2020 한국열환경공학회 학술대회지 Vol.2020 No.춘계
미세먼지는 우리 생활과 건강에 밀접한 관계가 있으며, 2013년에 세계보건기구 산하 국제암연구소에서 미세먼지(PM10, PM2.5)를 1군 발암물질로 지정하였다. 미세먼지를 이루는 성분은 대기오염물질이 공기 중에서 반응하여 형성된 덩어리(황산염, 질산염 등)와 연소과정에서 발생된 탄소류와 검댕과 흙먼지 등에서 생기는 광물 등으로 구성된다. 그중에서 질소산화물과 황산화물 그리고 암모니아 등에서 발생된 대기오염물질 덩어리가 58.3%로 가장 높은 비율을 차지하고 있다. 본 연구에서는 연소반응장에서 발생되는 질소산화물 제어에 대한 것으로서 발생 자체를 최소화 할 수 있는 최적제어 방법들과 발생된 질소산화물의 최적 제거에 대한 방법들에 대해 조사하였다. 연소반응장에서 질소산화물의 생성은 분자 또는 원자 상태의 질소가 산소에 의해 산화되어 생성되는 Thermal NOx와 연료 중에 탄화수소 화합물로 결합되어 있는 질소가 고온 분위기에서 산화되어 생성되는 Fuel NOx 그리고 연소 중에 탄화수소 라디칼과 질소의 농도에 비례하여 생성되는 Prompt NOx로 구별되는데, 폐기물 연소에서의 NOx는 주로 Fuel NOx와 Thermal NOx에 기인된다. 폐기물 연소에서 사용될 수 있는 질소산화물의 제어기술은 최적연소기법, 화염온도를 낮추고 높은 온도에서의 체류시간을 줄이는 방법, 저 과잉 공기 연소방법, 약품을 사용하는 방법 등이 있다. 연소장에서 질소산화물 생성을 최소로 발생시킬 수 있는 조건을 만드는 것이 중요하며, 이러한 조건을 만들기 위해 최적연소기법(combustion optimization), 저과잉공기(less excess air), 다단연소(Air Staging), 연소가스재순환(FGR) 방법을 동시에 적용하여 최소발생을 유도하도록 하며, 발생된 질소산화물의 제거는 선택적비촉매환원(SNCR) 기술과 선택적촉매환원(SCR) 기술 등을 활용한다. 연소반응장에서 과잉공기를 줄이고 공기배분의 최적화와 연소가스재순환 기술적용과 선택적비촉매환원(SNCR) 기술만으로도 30ppm 이내로 제어가 가능할 것으로 판단되며, 선택적촉매환원(SCR)을 추가하게 되면 한자리수의 매우 낮은 농도제어가 가능할 것이며, 최적제어에 의한 최소발생은 약품사용량과 암모니아 슬림(slip)을 최소화시킴으로서 경제성과 대기질 향상에도 기여할 것으로 판단된다.