http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
경수5번 완전손상 장애인의 욕창예방 보조기구 적용 사례
유성문(S.M. Yoo),임명준(M.J. Lim) 한국재활복지공학회 2010 한국재활복지공학회 학술대회논문집 Vol.2010 No.11
본 사례연구에서는 외상성 척수손상으로 인해 경수 5번 완전손상을 가지게 된 후, 하루 평균 12시간이상의 휠체어 사용으로 좌골(ischium)부위에 욕창이 발생한 대상자에게 휠체어의 자세 변환장치를 적용하였다. 적용 후 전동 휠체어의 자세 변환장치를 이용하여 좌골(ischium)부위에 대한 압력을 감소시킴으로서 휠체어를 사용하는 시간동안에도 극대화된 욕창 예방효과를 제공할 수 있었다.
고차-시간 주파수 기술을 이용한 평판에서의 충격 위치추적
문유성(Moon, Yoo-Sung),이상권(Lee, Sang-Kwon),양홍군(Yang, Hong-Goon) 한국소음진동공학회 2011 한국소음진동공학회 논문집 Vol.21 No.2
The aim of this paper is to present the method of identifying the impact location on the plate. This basic research has the future purpose to achieve the human-interaction technology based on the signal processing, piezoelectric materials, and wave propagation. The present work concerning the location identification of a single impact on the plate simulated the waveform numerically generated by impact force and applied the SWFOM(sliced Wigner higher fourth order moment) to the waveform to get the arrival time differences due to impact force between three sensors attached to the plate. The simulated signal is useful to get the information for time interval for the only direct wave. This information is used the source localization by using experimental work. The measured signal is also used for source localization of a single impact based on the higher order time frequency as a novel work.
외상성 척수손상장애인과 뇌성마비장애인의 맞춤형 전동휠체어 적용 시 착석시스템의 차이에 대한 연구
유성문(S. M. Yoo),조금란(K. R. Cho),임명준(M. J. Lim),김종배(J. B. Kim) 한국재활복지공학회 2009 재활복지공학회논문지 Vol.3 No.1
본 논문은 외상성 척수손상 장애인(SCI)과 뇌성마비장애인(CP)의 맞춤형 전동휠체어 적용 시 착석시스템에 대해 비교해 보는 연구이다. 이를 통하여 장애 영역에 따른 맞춤형 전동휠체어 착석시스템의 다른 점을 파악하고,이러한 결과들을 기초로 하여 휠체어 공적급여 및 처방 시 관련된 문제들을 개선하는데 도움이 되고자 한다. 휠체어 앉기 및 자세는 크게, 자세유지장치, 착석쿠션, 휠체어 자세변환장치 등 세 가지로 구분되어 있다. 국립재활원의 장애인 보조기구 사례관리 시범사업의 2009년 대상자 중 맞춤형 전동휠체어를 처방하고 구축해준 SCI 장애인 5명, CP 장애인 5명을 대상으로 수행한 일련의 과정을 통하여 대상자군에 따라 각 장치의 사용빈도가 차이가 있다는 것을 발견하였다. 자세유지장치는 머리받침대 등 총 10개의 소분류로 구분하였고,착석쿠션은 공기형 등 총 4개의 소분류로 구분하였다. 휠체어 자세변환장치는 틸팅 등 총 5개의 소분류로 구분하였다. 자세유지장치에서는 대상군에 따라서 각 소분류의 필요 빈도가 달랐으며, 착석쿠션 또한 SCI 장애인은 공기형을 주로 쓰며,CP 장애인은 폼형을 주로 쓰는 것으로 나타났다. 휠체어 자세변형장 치로는 SCI 장애인군에서는 다양한 장치를 사용하였으나,CP 장애인군에서는 기본형 전동휠체어 장치를 사용하였다. In this paper, we compared wheelchair seating system between wheelchair users with cerebral palsy and spinal cord injuries. Wheelchair seating system is divided into three parts, seating components, seating cushion, and special functions. Seating components are composed of 10 sections, such as headrest, footrest, etc. There are 4 seating cushions including gel, form, hybrid, and air. Also leg elevation, seat elevation, tilt-in-space, reclining, and standing are special function of the wheelchair. There are 10 wheelchair users, 5 with celebral palsy, and 5 with spinal cord injuries who have participated in this study. 10 wheelchair users have been customers of rehabilitation technology center in national rehabilitation center. On the result, SCI group mostly uses headrest, and Humeral blocks (seating components), air cushion (seating cushion), and tilt in space, reclining (special functions). On the other hand, CP group uses adductor, abductor, and pommel (seating components), form cushion (seating cushion), and some of CP group uses reclining (special functions)
전치 신호처리를 통한 평판에서의 다중 충격의 위치 추적에 관한 연구
문유성(Moon, Yoo-Sung),박홍석(Park, Hong-Sug),이상권(Lee, Sang-Kwon),신기홍(Shin, Ki-Hong),이영섭(Lee, Yung-Sup) 한국소음진동공학회 2011 한국소음진동공학회 논문집 Vol.21 No.3
This paper presents the novel work for source localization of serial multiple impacts in a plate sructure. It is difficult to identify the source of serial multiple impacts with the current source localization techenology(SLT) because of the overlapping of dispersive wave induced by multiple impacts and the reflaction from the edge of the plate. In this paper, the new method is suggested for source localization. The method is developed based on the SLT with pre-signal processing such as some limitation for the selection of three sensors, the frequency range for TFA and impact time interval. Results from numerical simulation and experiment in isotropic plate structure are presented, which show the capability of the proposed method.
언택트 시대, 국내 보조기기센터 교육운영 현황과 향후 접근방향 제안
유성문(S. M. Yoo),김동아(D. A. Kim),이성아(S. A. Lee) 한국재활복지공학회 2021 한국재활복지공학회 학술대회논문집 Vol.2021 No.11
In this study, in order to investigate the current status of assistive technology center education in the Corona situation and to suggest future directions, we investigated and analyzed the educational status of domestic assistive technology centers and related institutions of assistive technology centers, and then suggested future approaches. As the non-face-to-face era has arrived due to various problems, face-to-face service-based assistive technology centers require various preparations to provide optimal services. Among them, education should be prepared to reflect the level of demand between instructors and students as much as possible and to maximize the educational effect of face-to-face environments even in non-face-to-face environments.
김현수,문성인,윤문수,고병희,박상건,신동오,유성모,이승호,Kim Hyun-Soo,Moon Seong-In,Yun Mun-Soo,Ko Beyng-Hi,Park Sang-Kun,Shin Dong-O,Yoo Seong-Mo,Lee Seung-Ho 한국전기화학회 2001 한국전기화학회지 Vol.4 No.3
최근 리튬이온전지를 채용한 노트북 PC의 수요는 계속 증가하고 있으며, 노트북 PC용 전지로는 잔존용량과 사용가능 시간을 정확하게 예측하며, 스스로 최적조건으로 충방전을 제어할 수 있는 SBP(smart battery pack)를 많이 채용하고 있다. SBP는 과충전, 과방전 및 과전류로부터 리튬이온전지의 안전성을 확보하기 위한 보호회로부 (protection IC)와 잔존용량 및 사용가능시간 등의 계산을 위한 지능회로부 (smart IC)로 구성되어있다. 보호회로는 충전 및 방전 FET를 이용하여 이상전류를 차단하며, SBS(smart battery system)는 system host, smart battery 및 smart battery charger로 구성되어 있다. 향후, SBP에 사용되는 IC는 저가이면서, 소비전류가 낮고, 소형화가 요구된다. 또한, microcomputer control type의 IC를 사용하고, 최적의 알고리즘을 개발하여 잔존용량 및 사용가능시간을 정확하게 예측할 필요가 있다. 이러한 SBS 기술은 노트북 PC 이외에도 전기자전거, 전기자동차, 전력저장용, 군사분야 등 광범위한 분야에서 사용될 것으로 예상된다. Recently, the demand for notebook PC with lithium ion batteries has steadily increased and consumers require them to adopt a SBP(smart battery pack) able to predict the remaining capacity and the run time of batteries precisely. The SBP is composed of a protection If, by which safety of lithium ion batteries is maintained against overcharge, overdischarge and overcurrent, and a smart IC, which calculates the remaining capacity and the remaining run time. The protection IC shut abmormal current down by using overcharge/overdischarge FET. A SBS(smart battery system) is composed of a system host, a smart battery and a smart battery charger. The smart ICs for SBP will be required to provide a low cost, low current consumption and small size. There will need to develop a microcomputer control type IC and an optimum algorism which is able to predict the residual capacity and the residual run time precisely. SBS will apply to many kinds of industry fields such as an electric bicycle, an electric vehicle, a load levelling and a military.