http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
순환유동층에서 입자의 크기변화에 따른 층밀도의 변화특성
한귀영,안귀룡 한국화학공학회 1996 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.34 No.6
순환유동층의 조업에 중요한 영향을 미치는 고체입자의 농도분포에 대한 고체입자 크기의 영향을 살펴보았다. 본 연구에 사용된 순환유동층은 직경 50㎜, 높이 2500㎜였다. 사용된 입자는 크기가 다른 모래였으며 각각의 평균 직경은 147, 280㎛이었다. 기체의 유속범위는 3-5.5 m/s. 입자순환량은 10-100㎏/㎡·s이었으며 이때 압력강하로부터 측정된 suspension density는 10-80㎏/㎥이었다. 입자의 크기변화 및 기체유속의 변화에 따른 고체입자의 국부적 그리고 평균 농도분포의 변화를 관찰할 수 있었으며, 순환유동층의 조업변수들로부터 평균 입자농도를 예측할 수 있는 상관관계식을 제시하였다. An experimental investigation was carried out to determine the effect of particle size and gas velocity on the suspension density in a circulating fluidized bed. The experimental test section has the dimension of 50 ㎜ ID × 2500 ㎜ height and two different sizes of sand(147, 280㎛) were employed as the bed material. The operating conditions of gas velocity and solid circulation rate were in the ranges of 3.0-5.5m/s and 10-100㎏/㎡·s, respectively and the corresponding suspension density determined from the pressure drop was 10-80 ㎏/㎥. The effects of gas velocity and solid circulation rate on the suspension density with different size of sand particle was observed. A correlation was proposed to predict the cross-sectional averaged suspension density with the operating variables.
Ziegler-Natta 촉매 및 Metallocene 촉매로 제조된 PE 입자의 유동층에서의 공극률 특성
조홍일,양동현,한귀영,안귀룡 한국화학공학회 2001 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.39 No.6
Ziegler-Natta 및 Metallocene 촉매로 기상유동층에서 중합된 polythylene 입자의 공극률 특성을 높이 50㎝, 직경 7㎝의 유동층 실험장치에서 관찰하였다. 기체유속이 최소유동화 속도에서 난류유동화 속도까지 변화할 때 유동층 내에의 평균 공극률은 Metallocene 촉매로 중합된 PE의 경우 0.4-0.65이었고, Ziegler-Natta 촉매로 중합된 PE의 경우 0.4-0.85이었다. 입도분포가 비교적 넓은 Ziegler-Natta 촉매로 중합된 PE가 Metallocene 촉매로 중합된 PE 보다 압력변동의 폭이 작았으며, Metallocene 촉매로 중합된 PE에 Ziegler-Natta 촉매로 중합된 PE를 첨가함에 따라 압력변동의 폭이 감소하면서 공극률은 증가하였다. The characteristics of bed voidage in a fluidized bed of polyethylene particles polymerized by Metallocene and Ziegler-Natta catalysts were investigated in a fluidized bed of 7㎝ I.D. and 50㎝ in height. The average bed voidage for the ranges of gas velocity from minimum fluidization velocity to turbulent fluidization velocity were 0.4-0.65 for PE with Metallocene catalyst and 0.4-0.85 for PE with Ziegler-Natta catalyst. The pressure fluctuations were smaller for PE with Ziegler-Natta catalyst than that with Metallocene catalyst. The addition of PE with Ziegler-Natta catalyst to the PE with Metallocene catalyst reduced the pressure fluctuations and increased the bed voidage.