http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
서현호,오시환,용기력,최홍택 한국항공우주학회 2012 한국항공우주학회 학술발표회 논문집 Vol.2012 No.4
본 논문에서는 인공위성의 초기운용 때 펼쳐질 시나리오에 따라 자세제어계 영향을 분석하는 내용을 다룬다. 탑재안테나의 전개를 예로 들은 위성구조물의 변화, 안전모드 혹은 과도기 모드에서 추력기 기반 자세제어를 수행하면서 각 유닛을 초기 구동하여 정상적으로 진입하는 과정에 대한 시나리오를 각각 시뮬레이션으로 살펴보았다. 이를 통해 자세제어계에서 예상되는 결과를 도출하고, 초기운용 시나리오의 타당성을 검증하였다. The effect on AOCS(Attitude and Orbit Control Subsystem) is analyzed in LEOP(launch and early operation phase). We investigate the LEOP scenario throughout the simulation study. Several examples such as the deployment of payload antenna, the initial activation and checkout of AOCS units are presented to verify not only the attitude performance but also the feasibility of LEOP scenario.
제어모멘트자이로 클러스터의 특이점 회피를 위한 디더제어 방안
서현호,최홍택 한국항공우주학회 2013 한국항공우주학회 학술발표회 논문집 Vol.2013 No.4
인공위성의 자세제어를 위해 제어모멘트자이로를 탑재할 경우 발생할 수 있는 특이점 회피 방안으로서 디더제어를 도입하는 방안을 알아보았다. 그러기 위해서 인공위성의 운동방정식과 제어모멘트자이로 구동법칙을 소개하였다. 이후에 디더제어를 이용하는 방안을 제시하고, 시뮬레이션으로 특이점 회피 가능성을 입증한다. 내부제어루프에 디더제어를 도입할 경우 특이점을 회피할 수 있다는 기존 연구결과에서 확장하여 외부제어루프에 디더제어를 도입함으로써 특이점을 회피할 수 있다는 새로운 아이디어를 확인할 수 있다. We investigate the feasibility of dither control to control the attitude of satellite equipped with control moment gyroscopes cluster. The satellite dynamics and the steering law of control moment gyro cluster is introduced. We present the application method of dither control, and the possibility of singularity avoidance is verified by simulation study. The case of introducing the dither control in the inner loop was well-developed by existing study. We newly extend this idea to the outer loop and verify that the singularity of control moment gyroscopes cluster could be avoided.
저궤도 인공위성의 지상국 접속 및 자세제어계 서브모드 전환에 따른 사례 분석
서현호,임조령,전문진,최홍택 한국항공우주학회 2012 한국항공우주학회 학술발표회 논문집 Vol.2012 No.11
자세제어계의 정상 모드는 태양지향 모드와 목표지향 모드로 이루어 져 있다. 이 두 서브모드간 전환이 자유롭게 이루어 진후 정상상태에서 문제 발생을 대비한 임계값 설정의 과정이 있다. 본 논문에서는 지상국 접속 및 자세제어계 모드전환 시나리오를 복합적으로 사례 분석해 봄으로써 정상상태의 수렴 특성을 확인하고 안전하게 임계값을 설정할 수 있는 지 그 타당성을 검증하는 과정을 알아본다. The Attitude and Orbit Control Subsystem (AOCS) are composed of sun-pointing and target pointing submode in normal mode of a low earth orbit satellite. After changing between submodes, the critical parameters are set to transition to safe modes in case of anomalies. We perform the case study by changing AOCS submodes and contacting the ground station. This performance analysis includes convergence characteristics and verification processes where the critical values are set safely
서현호,김재웅,박성현 한국지식정보기술학회 2022 한국지식정보기술학회 논문지 Vol.17 No.6
Since the 4th Industrial Revolution, digital twins have become an essential element in the advancement stage of smart factories. However, in order to express the manufacturing facility in a virtual space, design data of the manufacturing facility is required, but soft objects such as pneumatic pipes and wires are often omitted during the machine design stage. To solve this problem, additional design personnel are required, and the piping data generated through the existing machine design program occupies a large number of unnecessary resources in terms of optimization. To address this problem, this work presents a method for modeling pneumatic piping directly through sweep-based modeling inside Unity, which is widely used in the field of digital twin research. In this paper, we easily set the transit point of pneumatic piping using the transform object provided by Unity, and generate a spline curve through objectification of the transit point. In addition, the shape of the cross-section and the number of division points of the entire path can be freely set, so that the degree of optimization of the rendering process can be adjusted. One of the challenges of constructing a digital twin is expected to be effective in solving by this method, allowing simulation workers to freely add and modify missing objects in the pre-design stage.