http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박승섭(Seung Sub Park),김화영(Hwa Young Kim),안중환(Jung Hwan Ahn) 한국생산제조학회 2016 한국생산제조학회지 Vol.25 No.2
Overlap cutting is a fundamental method of applying abrasive water jet (AWJ) machining to milling to produce a wider surface because the nozzle outlet is approximately 1.0 mm wide. In this study, the effects of overlap cutting on the depth profile and surface roughness are investigated. The overlapping area depends on the amount of step over, which is controlled in the pick-feed direction. If the step over is equal to or larger than the diameter of the nozzle, no overlap cut occurs but large cusps remain between the cut paths. A step over as small as one-thirds of the nozzle diameter may lead to triple-overlap cutting resulting in an extraordinary depth. By using pocket milling experiments with a step over of 0.46 (or 0.47), it is verified that AWJ can produce a milled surface of titanium, one of the hard-to-cut materials, with 76 μm Ra.
박승섭(Seung Sub Park),김화영(Hwa Young Kim),안중환(Jung Hwan Ahn) 한국생산제조학회 2016 한국생산제조학회지 Vol.25 No.1
Because of the increasing tool cost for cutting hard-to-cut materials, abrasive water jet (AWJ) milling recently has been regarded as a potential alternative machining method. However, it is difficult to control the depth and width of cut in AWJ milling because they vary depending on many AWJ cutting parameters. On 27 conditions within a limited range of pressure, feed rate, and abrasive flow rate, AWJ cutting was conducted on titanium, and depth profiles were measured with a laser sensor. From the depth profile data, depth and width of cut were acquired at each condition. The relationships between depth and parameters and between width and parameters were derived through regression analysis. The former can provide proper cutting conditions and the latter the proper pick feed necessary to generate a milled surface. It is verified that pressure mostly affects depth, whereas abrasive flow rate mostly affects width.
유무선 교환 시스템에서 No.7 시그널링을 이용한 시스템 트래픽에 관한 성능 평가
김승수 ( Seung-su Kim ),박승섭 ( Seung-sub Park ) 한국정보처리학회 2006 한국정보처리학회 학술대회논문집 Vol.13 No.2
공통선 신호방식 중에서 유무선 교환 시스템에서는 No.7 시그널링을 대부분 채택하여 사용하고 있으며, 이는 보다 복잡 다양해진 서비스와 네트워크의 성능을 제공하기 위해서 유무선 교환 시스템에서 일반 호 처리, 중계 호, 지능망 호, 그리고 MAP 연동을 위해 사용되고 있다. 따라서 No.7 시그널링의 장애는 전체 교환 시스템의 기능상실 및 운용 유지보수에 어려움이 따르게 되므로 No.7 시그널링의 장애 및 이상 유무에 대한 신속한 분석과 차 후 대책을 수립할 수 있는 시스템이 필요하게 되었다. 본 논문에서는 이러한 문제점을 해소하기 위하여 TURBO-7과 SNS-7에 대한 트래픽 분석 및 두 시스템의 성능 비교분석을 통하여 유무선 교환 시스템의 안정적인 운용에 기여하고자 한다. 그리고 향후에는 CDMA 네트워크에서는 A-Interface 기능과 W-CDMA 네트워크에서는 Iu-Interface 기능들도 제공함으로써 보다 복잡한 이동통신 네트워크의 트래픽 분석과 효율적인 시스템 운용에 도움을 줄 수 있다.
클라우드 컴퓨팅의 기술 분석 및 데이터 보안성에 관한 연구
김승일(Seung-Il Kim),박승섭(Seung Sub Park) 한국멀티미디어학회 2010 한국멀티미디어학회 학술발표논문집 Vol.2010 No.1
최근들어 가장 이슈화 되고 있는 클라우드 컴퓨팅 기술에 대해 많은 기업들이 관심을 가지고 있다. 본 논문을 통해 클라우드 컴퓨팅의 기술 분석 및 데이터 보안성에 대한 해결해야 할 여러 가지 문제점을 알아보고 이를 배경으로 클라우드 컴퓨팅 보안 시스템을 알아보고 차세대 네트워크로의 발전 가능성에 대해 알아본다.
김승수(Seung-Su Ki),박승섭(Seung-Sub Park) 한국정보과학회 영남지부 2006 한국정보과학회 영남지부 학술발표논문집 Vol.14 No.1
공통선 신호방식 중에서 유무선 교환 시스템에서는 No.7 시그널링을 대부분 채택하여 사용하고 있으며, 이는 보다 복잡 다양해진 서비스와 네트워크의 성능을 제공하기 위해서 유무선 교환 시스템에서 일반 호 처리, 중계 호, 지능망 호, 그리고 MAP 연동을 위해 사용되고 있다. 따라서 No.7 시그널링의 장애는 전체 교환 시스템의 기능상실 및 운용 유지보수에 어려움이 따르게 되므로 No.7 시그널링의 장애 및 이상 유무에 대한 신속한 분석과 차 후 대책을 수립할 수 있는 시스템이 필요하게 되었다. 본 논문에서는 이러한 문제점을 해소하기 위하여 TURBO-7과 SNS-7에 대한 트래픽 분석 및 두 시스템의 성능 비교분석을 통하여 유무선 교환 시스템의 안정적인 운용에 기여하고자 한다. 그리고 향후에는 CDMA 네트워크에서는 A-Interface 기능과 W-CDMA 네트워크에서는 Iu-Interface 기능들도 제공함으로써 보다 복잡한 이동통신 네트워크의 트래픽 분석과 효율적인 시스템 운용에 도움을 줄 수 있다.
자궁내막암에서 CD44v6의 발현과 임상병리학적 예후인자와의 상관성
신병섭 ( Byung Sub Shin ),정재혁 ( Jae Heok Jeong ),정은주 ( En Ju Jeong ),조무성 ( Mu Sung Joo ),박승섭 ( Seung Seop Park ),김기형 ( Ki Hyung Kim ),윤만수 ( Man Soo Yoon ) 대한산부인과학회 2004 Obstetrics & Gynecology Science Vol.47 No.9
목적 : 병리조직검사로 확진된 자궁내막암 환자에서 CD44v6의 임상적 유용성을 알아보고자 본 연구를 시행하였다. 연구 방법 : 전자궁적출술과 양측 자궁부속기 절제술이 시행된 39예의 자궁내막암환자를 대상으로 의무기록지 검토와 면역조직화학 염색을 통한 후향적 연구를 하였다. 결과 : CD44v6 발현은 자궁내막암이 자궁근층 침범 없이 자궁내막에 국한된 침범을 나타낸 경우에 통계학적으로 유의한 차이로 발현되었고, CD44v6 발현된 경우 유의한 차이로 림 Objective : The purpose of this study was to evaluate the clinical usefulness of CD44v6 in patients with histologically confirmed endometrial cancer. Methods : Immunohistochemistry was used to determine the expression of CD44v6 in 39 hysterectomy specimen