http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
엄병식,박경부,서영찬,Eom, Byung-Sik,Park, Kyung-Bu,Suh, Young-Chan 한국도로학회 2000 한국도로포장공학회 논문집 Vol.2 No.3
증가되는 항공교통량에 대해서 효율적으로 공항포장을 관리하기 위해서는 포장상태를 정기적으로 모니터링 할 필요가 있다. 이를 위하여 국내에서는 모든 공항에 대해 5년 주기로 포장평가를 실시하고 있다. 그러나 현재까지 사용된 기존의 포장 평가방법은 설계차트에 의한 원시적인 방법으로서 실제상황을 잘 반영하지 못한다라는 것이 문제점으로 지적되어 왔다. 본 연구에서는 과거의 설계차트에 의한 포장 평가방법과 새로이 국내에 적용된 외국의 해석적인 포장 평가방법을 비교, 분석함으로써 각 방법별 차이점을 제시하였다. 또한 "P" 공항에 대한 실제 사례 연구를 통해 각 방법별 허용하중 결과를 산출하였고 장단점을 분석하였다. 연구 결과로 포장의 구조적 지지력 평가는 설계차트를 이용하는 것보다 해석적 접근방법이 더 논리적인 접근인 것으로 분석되었다. Periodical evaluations of the airfield pavement are necessary to provide the ability for the existing pavement to support the increasing volume of air traffic. Also, the evaluation of the existing Pavement condition is necessary for the decision of the maintenance strategy. For this reason, airport pavements in Korea have been evaluated every five years currently. It was known, however, that the current pavement evaluation methodology was not logical and practical. The purpose of this study is to compare the current pavement evaluation method with design chart to the mechanistic approach used in other advanced countries. As a result of this study the mechanistic approach is found to be more logical than the current method.
박병식,김승우,Park Byung Sik,Kim Seung Woo 대한전기협회 2004 전기저널 Vol.335 No.-
가스터빈을 이용하는 발전시스템 중에서 발전용량이 300kW 이하인 시스템을 마이크로터빈 발전 시스템이라 하며, 가스터빈에서 배출되는 폐열을 활용하여 열효율을 극대화시킨 것이 열병합발전 시스템이다. 마이크로터빈 열병합발전 시스템은 소형이면서 발전 및 열효울이 높고, 환경친화적인 제품 특성을 갖고 있으며, 또한 기존에 주로 사용되고 있는 천연가스 및 액체 연료 뿐만 아니라 유정이나 쓰레기 매립장 등에서 버려지는 낮은 품질의 가스도 연료로 사용할 수 있도록 하여 에너지 활용도를 높일 수 있다. 본 논문에서는 국내에서 개발중인 65kW급 마이크로터빈 열병합발전 시스템을 소개하고 현재까지의 개발현황을 정리하였다. Microturbine geneator is the system generating electric power under 300kW using a gas turbine, and the combined heat and power generating system is recycling exhausted gas to increase thermal efficiency. Microturbine system is featured as small, efficient
다수의 에어 포켓을 가지는 포장재의 단열성능에 대한 실험적 연구
김도훈(Do Hoon Kim),박병식(Byung-sik Park) 대한설비공학회 2010 대한설비공학회 학술발표대회논문집 Vol.2010 No.6
When the hot water flows in heating pipes, heat losses occur via conduction, convection and radiation. We usually adopt insulation material such as glass wool, polyethylene foam and polyurethane foam in order to reduce heat loss from the surface of metal pipes. The conductivity, thickness and emissivity of the insulation material can affect the heat loss amount for the same heating pipes. Rising oil price makes reducing heat loss of heating pipe more importance. With time, Insulation thickness should be complementary more and more. but it happens that material cost increases. This paper is to show the insulation performance of the packing with lots of air pockets. This packing can make material cost savings as well as having the similar insulation performance as compared with glass wool or polyethylene foam.