http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박병석(Byung Suk Park),한종희(Jong Hui Han),유승남(Seung Nam Yu) 대한설비공학회 2018 대한설비공학회 학술발표대회논문집 Vol.2018 No.11
The purpose of this study is to analyze and evaluate the pressure, flow rate and volume flow rate of the designed dry room by computational fluid analysis and to apply the results to dry room construction and drying system design. The Korea Atomic Energy Research Institute is studying pyro-process technology as a method for recycling spent fuel and minimizing waste, which is performed in a salt environment. The salt causes corrosion, so the moisture in the air must be removed. Dry glove boxes are therefore prepared for small-scale studies, but small- and medium-scale studies require drying rooms because workers are considered access. The long-term robustness and salt corrosion performance of chemical processing equipment is verified in this room under high temperature conditions. When a problem occurs, the operator immediately goes inside and identifies the problem. Compared to the drying room in general industry, since the operator does not need to go in and out frequently, we designed a hybrid dehumidification system that combines a room with airtightness and compressed dry air. This system can maintain the ultra-low humidity by supplying compressed air without activating the dehumidifier when the operator does not go inside the room.
박병석(Byung-Suk Park),이상엽(Sang Yeob Lee),구본경(BonGeong Koo) 한국자동차공학회 2010 한국자동차공학회 학술대회 및 전시회 Vol.2010 No.11
Recently, ADAS such as SCC, CDM becomes hot issue and done in mass-production in luxury passenger cars. SCC control logic is divided in 2 parts; follow&distance control, acceleration control. CDM control logic is composed of collision warning and auto braking braking. Here develops vehicle acceleration control using vehicle speed and longitudinal acceleration sensor for SCC and CDM, and tests in vehicle state. The test results show that developed controller has good performance for SCC.
박병석(Park, Byung Suk),김승현(Kim, Seung Hyun),우용훈(Woo, Yong Hoon) 대한토목학회 2020 대한토목학회 학술대회 Vol.2020 No.10
태양광 발전 설비를 설치하기 위하여 기존의 자연비탈면을 굴착하고, 벌목 작업으로 약해진 지반에 발전 설비 설치하고 있으며, 태양광 발전 자체에만 관심이 있을 뿐, 비탈면 안정화에 대한 전문가 검토는 이루어지지 않고 있는 실정이다. 토사유출방지와 배수공사와 관련하여 공사비 절약을 위해 날림공사를 반복하고 있으며, 경사지에 적용된 태양광 설비는 적은 양의 비에도 붕괴되는 사례가 지속적으로 보고되고 있다. 최근 붕괴산물이 도로로 직접 침입하여 피해가 발생함에 따라 관련 시설물 검토 필요성이 대두되고 있다. 산지 및 비탈면부에 태양광 발전시설이 설치되면서 태양광 기초 및 패널 설치로 인해 산림이 크게 훼손되었으며, 기초지반 문제로 인해 여러가지 불안정 요소가 증가하고 있어 유형별 분석(기초, 우수, 비탈면 안정)을 통한 안전 확보방안 및 기준마련이 필요하다.