http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
백색광 소자 응용을 위한 Gd₂WO₆:RE<SUP>3+</SUP> (RE = Dy, Sm, Dy/Sm) 형광체의 구조 및 발광 특성
박기원(Giwon Park),정재용(Jaeyong Jung),조신호(Shinho Cho) 한국표면공학회 2020 한국표면공학회지 Vol.53 No.4
A series of Dy<SUP>3+</SUP>, Sm<SUP>3+</SUP>, and Dy<SUP>3+</SUP>/Sm<SUP>3+</SUP> doped Gd₂WO₆ phosphors were synthesized by the conventional solid-state reaction. The X-ray diffraction patterns revealed that all of the diffraction peaks could be attributed to the monoclinic Gd₂WO₆ crystal structure, irrespective of the type and the concentration of activator ions. The photoluminescence (PL) excitation spectra of Dy<SUP>3+</SUP>-doped Gd₂WO₆ phosphors contained an intense charge transfer band centered at 302 ㎚ in the range of 240–340 ㎚ and two weak peaks at 351 and 386 ㎚. Under an excitation wavelength of 302 ㎚, the PL emission spectra consisted of two strong blue and yellow bands centered at 482 ㎚ and 577 ㎚. The PL emission spectra of the Sm<SUP>3+</SUP>-doped Gd₂WO₆ phosphors had a series of three peaks centered at 568 ㎚, 613 ㎚, and 649 ㎚, corresponding to the ⁶G5/2→⁶H5/2, ⁶G5/2→⁶H9/2, and ⁶G5/2→⁶H11/2 transitions of Sm<SUP>3+</SUP>, respectively. The PL emission spectra of the Dy<SUP>3+</SUP>- and Sm<SUP>3+</SUP>-codoped Gd₂WO₆ phosphors showed the blue and yellow emission lines originating from the ⁴F9/2→⁶H15/2 and ⁴F9/2→⁶H13/2 transitions of Dy<SUP>3+</SUP> and reddish-orange and red emission bands due to the ⁴G5/2→⁶H7/2 and ⁴G5/2→⁶H9/2 transitions of Sm<SUP>3+</SUP>. As the concentration of Sm<SUP>3+</SUP> increased from 1 to 15 ㏖%, the intensities of two PL spectra emitted by the Dy<SUP>3+</SUP> ions gradually decreased, while those of the three emission bands due to the Sm<SUP>3+</SUP> ions slowly increased, thus producing the color change from white to orange. The CIE color coordinates of Gd₂WO₆:5 ㏖% Dy<SUP>3+</SUP>, 1 ㏖% Sm<SUP>3+</SUP> phosphors were (0.406, 0.407), which was located in the warm white light region.
전기비저항과 전단파 토모그래피를 이용한 해상 기초구조물의 세굴도 평가
박기원(Kiwon Park),이종섭(Jongsub Lee),최창호(Changho Choi),변용훈(Yonghoon Byun) 한국지반환경공학회 2014 한국지반환경공학회논문집 Vol.15 No.9
해상 기초구조물은 수평하중에 지배적인 영향을 받으며, 세굴 발생으로 인한 모노파일의 근입깊이 및 지반강성의 감소는 구조물의 안정성을 저하시키게 된다. 본 연구의 목적은 전기비저항 모니터링 기법을 이용하여 기초구조물의 연직 세굴심도를 평가하고, 전단파 토모그래피를 통해 지반강성의 공간적 분포 및 변화양상을 파악하는 것이다. 해상 기초구조물에서의 세굴현상을 모사하기 위하여 하단이 고정된 모형 모노파일을 중앙에 위치시킨 후 모래 및 시멘트를 이용하여 모형 지반을 조성하였다. 전기비저항을 측정하기 위하여 모형 모노파일에 수평 및 수직배열로 구분하여 전극쌍을 설치하였으며, 전단파 측정을 위해서 사각형 프레임에 벤더 엘리먼트를 7 × 7로 배열하였다. 세굴도 변화에 따라 위치별 전기비저항과 전단파 토모그래피 이미지를 측정하였다. 실내실험을 통해 세굴도 변화에 따른 위치별 전기비저항 변화와 전단파 토모그래피를 관찰하였고, 각 단계별 지반 변화양상을 파악하였다. 위치별 전기비저항의 변화를 통해 최대세굴심도 평가가 가능했으며, 전단파 토모그래피를 통해 세굴로 인한 지반의 전단강성 변화를 추정할 수 있었다. 본 논문에서 제시한 전기비저항과 전단파 토모그래피는 세굴현상으로 인한 해상 기초구조물 주변의 지반특성을 모니터링하기 위한 매우 효과적인 방법이 될 수 있음을 보여준다. An embedded length of monopile caused by a scouring should be evaluated to monitor the stability of offshore foundations, because offshore foundations are affected by horizontal load. The objective of this study is to evaluate the scouring around offshore foundation by using electrical resistivity and to estimate ground stiffness by using shear wave tomography. The electrical resistivity profiles and shear wave tomography were measured according to the scour depth of model ground prepared with sand and cement. Several electrodes and bender elements were used to measure the electrical resistivity and shear waves, respectively. The electrode sets are attached on the monopile surface and bender elements are arranged in 7 × 7 arrays by using nylone frames. The electrical resistivity profiles and shear wave tomography are acquired by laboratory experiment. Maximum scour depth was estimated by electrical resistivity profiles and the ground stiffness of model ground was estimated by shear wave tomography. This study suggests that the electrical resistivity profiles and shear wave tomography may be useful for monitoring the stability of the offshore foundations.