http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
스펙트럼 분할 WDM시스템에서 수신감도 해석에 관한 연구
이영석(Yeong-Seok Lee),노신래(Shin-Rae Roh) 산업기술교육훈련학회 2011 산업기술연구논문지 (JITR) Vol.16 No.3
The Conventional WDM(Wavelength-Division-Multiplexing) systems employ laser diodes operating at discrete wavelengths as carriers for the different data channels that are to be multiplexed. In this study, we investigates the design and performance issues of a recently demonstrated technique, termed as spectrum-slicing, for implementing WDM in optical fiber systems. Spectrumslicing provides an attractive low-cost alternative to the use of multiple coherent lasers for such WDM applications by utilizing spectral slices of a broadband noise source for the different data channels. The principal broadband noise source considered is the amplified spontaneous emission(ASE) noise from an optical amplifier. The spectra effect on receiver sensitivity is investigated for both OOK and FSK transmission, assuming the system (de)multiplexer filters to be N th order Butterworth bandpass. As a result, the theoretical receiver sensitivity for OOK transmission and FSK transmission for 20m=20 are 1.9 ×10 2??and 1.9 ×??10 2, respectively.
강영진,손동희,노신래 圓光大學校 1995 論文集 Vol.29 No.2
집적광학에서 가장 기본적이고 필수적인 소자인 구형 유전체도파로는 근사적인 해석방법에서부터 수치계산방법까지 여러가지 방법으로 연구되어 왔다. 본 논문에서는 구형 유전체도파로의 해석을 위해 섭동궤환방법을 이용하여 최적등가도파로모델을 선택하고, 시뮬레이션을 통한 비교, 분석 결과, 섭동궤환방법을 이용해서 구한 전파상수가 다른 방법에 의해 얻어진 결과보다 더욱 정확한 값에 일치함으로써 최적의 근사치를 얻을 수 있음을 확인하였다. Rectangular dielectric waveguides, the most fundamental and indispensible elements in integrated optics, have been investigated by many researchers with various approaching methods including from the relatively approximate techniques to the numerical method. In this paper, the optimum equivalent waveguide model is adopted which is determined by a perturbation feedback process for analyzing rectangular dielectric waveguide. Comparing and analyzing the propagation constant by means of computer simulation, we have ascertained that the propagation constant from perturbation feedback method gives the best approximate value because it coincide with more exact value than obtained by other approximating methods.
Frequency Hopping을 위한 주파수 합성기에 관한 연구
노신래,손동희,강영진 원광대학교 공업기술개발연구소 1993 工業技術開發硏究誌 Vol.13 No.-
We studied Spread Spectrum Communication System as the technique which solves the problems - the deterioration of transmission quality from the exhausiton of the limited frequency resources, the weakness of security maintenance caused by propagation property, and the jamming from self or intentional wave interferences, etc. In this paper, we desisted the frequency synthesizer for frequency hopping in FH/SS method, making message hop to wider bandwidth than the conventional PLL adoping frequency hopping pattern which is multiplied 1111 by PN code. Consequently, we obtained the bandwidth of 160 KHz ~ 2.28 MHz by making use of system desisted in this paper.
Optical Fiber-Waveguide 접속기에 관한 연구
노신래,강영진,손동희 圓光大學校 1996 論文集 Vol.31 No.2
단일 모드 광섬유로부터 박막 도파로까지의 효율적인 광전력 전송은 앞으로 직접광학 시스템의 실현을 위해 해결해야 될 가장 기본적이며 필수적인 과제이다. 본 연구에서는 uniform 형태를 갖는 광섬유-도파로 접속기중 결합도파로-1을 박막 도파로 상단에 성장시킨 구조로 하여 광섬유-도파로 접속기의 접촉면에서의 필드 특성의 불일치를 해소하였고 시뮬레이션을 통하여 구체적인 접속기 구조에 대한 전송효율이 90.2%에 달함을 보였다. Efficient power transmission from a single mode fiber to a thin-film waveguide is one of the most fundamental and inevitable subject that should be first solved toward the realization of the integrated optic system. In this paper, a uniform type fiber-waveguide connector is considered and the large mismathc of field profiles at the fiber-waveguide interface is well avoided by using to the coupling guide which is intentionally developed on the top of the thin-film guide. 90.2% power transmission efficiency was realized by computer simulation.
비균등 마이크로스트립 배열 안테나의 복사 특성에 관한 연구
朴魯埈,盧信來,姜英鎭 원광대학교 공업기술개발연구소 1994 工業技術開發硏究誌 Vol.14 No.-
In this paper, a rectangular microstrip patch array antenna fed by a microstrip transmission line has been designed and fabricated by using Tschebyscheff's polynomial method. The relative current of the microstrip transmission line is 1:2:2: 1. Its resonant frequency and radiation pattern are measured. The measured resonant frequency for 12.1mm×9.19mm copper clad duroid laminate plate is 9.7 GHz, where the theoretical frequency is 9.6 GHz for 12.1mm×9.19mm plate. The 0.1 GHz difference between the theoretical value and the measured value is due to the power division errors of the power divider. The study shows that the measured radiation Pattern of 4×4 array antennaby the Tschebyscheff's array is sharper than single. 1×4 array and 4×4uniform microstrip patch array antennas.