http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Advanced SIMD를 이용한 화면 간 예측 고속화방법
김완수,이재흥,Kim, Wan-Su,Lee, Jae-Heung 한국전기전자학회 2012 전기전자학회논문지 Vol.16 No.4
본 논문에서는 ARM Cortex-A9 듀얼코어 플랫폼에서 지원하는 병렬처리 기법 중 하나인 Advanced SIMD기반의 NEON을 적용한 H.264/AVC 고속화 움직임추정 방법론을 연구하였다. 다양한 움직임추정 방법 중 하나인 전역탐색기법에 NEON을 적용하여 각 매크로블록의 SAD 연산횟수를 1/4 감소시켰다. 해당 매크로블록의 픽셀 값들을 8개의 16bit NEON 레지스터에 할당하였고, NEON에서 지원하는 Intrinsic 함수를 사용하여 동시에 128bit 연산을 수행하였다. 이러한 방법으로 계산된 SAD 값들 중 최소 SAD 값을 가지고 정확한 모션벡터를 선정했다. 그 결과 영상의 크기 및 매크로블록의 크기에 따라 성능이 평균 30% 이상 향상되는 효과를 검증하였다. An H.264/AVC fast motion estimation methodology is presented in this paper. Advanced SIMD based NEON which is one of the parallel processing methods is supported under the ARM Cortex-A9 dual-core platform. NEON is applied to a full search technique with one of the various motion estimation methods and SAD operation count of each macroblock is reduced to 1/4. Pixel values of the corresponding macroblock are assigned to eight 16-bit NEON registers and Intrinsic function in NEON architecture carried out 128 bits arithmetic operations at the same time. In this way, the exact motion vector with the minimum SAD value among the calculated SAD values can be designated. Experimental results show that performance gets improved 30% above average in accordance with the size of image and macroblock.
Advanced SIMD를 이용한 움직임 추정 최적화 방법
김완수 ( Wan-su Kim ),이재흥 ( Jae-heung Lee ) 한국정보처리학회 2012 한국정보처리학회 학술대회논문집 Vol.19 No.2
최근 CPU의 코어 클럭을 높이는 대신 동일한 클럭의 코어 수를 늘림으로써 성능을 향상시키고 전력소모도 줄이는 멀티코어가 등장하고 있다. 이러한 멀티코어 플랫폼의 등장으로 인해 해당 코어들의 자원을 효율적으로 사용하여 동시에 처리하는 병렬처리 기법에 관한 연구가 활발히 진행되고 있다. 본 논문에서는 병렬처리 기법의 종류 중 하나인 Advanced SIMD기반의 NEON을 적용한 고속화 ME방법론을 연구 및 제안하였다. 최소화 SAD를 구하고 정확한 모션벡터를 선정하기 위해 다양한 ME 방법 중 전역탐색기법을 NEON에 적용하여 동시에 128비트씩 연산을 수행하였다. 그 결과 영상의 크기에 따라 계산 성능이 최대 60% 이상 향상되는 효과를 검증하였다.
유/무기 복합 발수제를 혼입한 모르타르의 재료특성 평가
김완수 ( Wan-su Kim ),윤창복 ( Chang-bok Yoon ),조인성 ( In-sung Cho ),이한승 ( Han-seung Lee ) 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 논문집 Vol.24 No.6
발수제를 콘크리트 표면에 함침시키는 방법은 콘크리트의 균열이 발생할 경우, 기대하는 내구성을 확보할 수가 없다. 최근, 다양한 방수 및 발수 재료들을 콘크리트나 모르타르 내부에 혼입하여 균열 내부에서도 발수성을 확보하였으나 압축강도가 크게 저하되었다. 압축강도 저하를 극복하기 위해 아직까지 유기물과 무기물의 장점들을 동시에 이용한 연구가 없기 때문에, 본 연구에서는 유기물과 무기물을 적절히 혼합한 유무기 복합 발수제를 모르타르에 혼입하여 물리적 특성 및 발수성능을 평가하였다. 유무기 복합 발수제 혼입 시 Liquid 시험체에 비해 플로우 약 10%, 공기량이 약 50% 감소하였으며, P6L1 시험체의 경우, 기존 발수제인 Powder와 같은 39.5MPa로 무혼입 모르타르 대비 약 3.5%의 압축강도 저하를 확인하였다. 발수성능도 유무기 복합 발수제 혼입 시험체가 기존의 발수제 혼입 시험체인 Powder보다 높은 발수성을 확인하였으며, 염화물 침투 저항성 평가결과, 유무기 복합 발수제 혼입 시험체가 무혼입 모르타르 대비 약 45% 통과 전하량이 감소되는 것을 확인하였다. 이상의 실험을 종합하면, Powder 발수제와 Liquid 발수제를 5:1의 비율로 혼입한 P5L1 유무기 복합 발수제가 압축강도 저하 방지 및 발수성능 확보를 위하여 가장 합리적이라고 판단된다. When the concrete surface layer is damaged, The method of impregnating the concrete surface with a water repellent cannot secure the expected durability. Recently, various waterproofing and water-repellent materials were mixed into concrete or mortar to secure water repellency even inside cracks, but compressive strength was greatly reduced. In order to overcome the decrease in compressive strength, there has not yet been a study using the merits of organic and inorganic materials at the same time, so in this study, the physical properties and water repellency performance were evaluated by mixing an organic/inorganic composite water repellent appropriately mixed with an organic and inorganic material into the mortar. When mixed with organic/inorganic water repellent, the flow and air content were reduced by about 10% and 50% compared to the Liquid specimen. In the case of the P6L1 specimen, it was confirmed that the compressive strength decreased by about 3.5% compared to the non-mixed mortar at 39.5 MPa, the same as the existing water repellent, Powder. Water-repellent performance The organic-inorganic composite water repellent mixture specimen confirmed higher water repellency than the existing water repellent mixture powder, and the chloride penetration resistance evaluation result showed that the organic-inorganic composite water repellent mixture specimen reduced the passing charge by about 45% compared to the non-mixed mortar. In summary, it is judged that the P5L1 organic/inorganic composite water repellent mixed with a powder water repellent and a liquid water repellent in a ratio of 5:1 is the most reasonable to prevent the decrease in compressive strength and secure water repellency.
김완수 ( Kim Wan-su ),장종민 ( Jang Jong-min ),이한승 ( Lee Han-seung ) 한국건축시공학회 2019 한국건축시공학회 학술발표대회 논문집 Vol.19 No.2
The Reinforced concrete structure is deteriorated in durability due to various deterioration factors such as acid, salt, etc., and thus requires repair and reinforcement. In this study, compressive strength and weight change were measured by substituting blast furnace slag with excellent chemical resistance. As a result, the decrease in compressive strength decreased in proportion to the blast furnace slag substitution rate, and in the case of BFS40, the strength increased after sulfuric acid immersion. The weight change also decreased in proportion to the replacement amount.
하이브리드 발수제를 혼입한 모르타르의 역학적 특성 및 흡수량
김완수 ( Kim Wan-su ),이한승 ( Lee Han-seung ) 한국건축시공학회 2020 한국건축시공학회 학술발표대회 논문집 Vol.20 No.1
Research is underway to incorporate water-repellent agents inside mortars to improve the durability of concrete. Therefore, in this study, the mechanical properties and absorption rate were evaluated by adding a hybrid water repellent in which a liquid and a solid were mixed at a constant ratio.As a result of the experiment, the compressive strength of the mortar added with the hybrid water repellent showed a strength reduction of about 5% than the compressive strength of the OPC, and the overall water absorption was lower than that of the water repellent used alone.