http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김광배,지기용,한동균,천세원,최종영,백영진 한국막학회 2017 한국막학회 총회 및 학술발표회 Vol.2017 No.11
기존의 육상 및 근해에서의 석유 생산량은 점차 감소하는 추세로 심해에서 석유 및 가스 생산량이 증가하고 있는 추세이다. 심해용 해상 생산 설비가 필수적이나 육상에 비해 설치비용이 2배이상 들어가기 때문에 설치면적당 가스처리량이 높은 기체분리막이 주목 받고 있는 상황이다. 현재 외산 분리막이 중용되고 있으며, 이를 대체할 국산화 제품 개발이 필요한 실정이다. 따라서 본 연구에서는 폴리이미드계 고분자인 폴리에테르이미드 고분자를 사용하여 기체분리 막을 제조 하였으며, 투과도와 선택도를 높이기 위해 코팅제로 polyether black amide (PEBAX)를 사용하여 이산화탄소/메탄의 분리 정제 효율을 증가시키기 위한 연구를 진행하였다.
지상기준점측량 적용을 위한 Network-RTK 측량 정확도 평가
김광배(Kim, Kwang Bae),이창경(Lee, Chang Kyung),안성(An, Seong) 대한공간정보학회 2014 대한공간정보학회지 Vol.22 No.4
본 연구는 2007년 이래 국토지리정보원에서 제공하고 있는 Network-RTK(VRS) 측량을 항공사진도화에 필요한 지상기준점측량에 적용하기 위하여 그 정확도를 검증하는데 목적이 있다. 세계측지계(ITRF2000)에 근거하여 국가기준점을 고정한 상대측위방식 Static GNSS 측량으로 지상기준점(GCP)을 측정하여 이를 정확값으로 간주하였다. 2종의 Network-RTK 수신기를 이용하여 동일 지상기준점의 위치를 구한 후, 좌표변환과 지오이드 모델을 적용하여 세계측지계 좌표로 변환하였다. Static GNSS 측량과 2종의 Network-RTK 측량에 의한 측정값을 비교한 결과, GCP위치좌표의 평균제곱근오차는 평면에서 ±2.0 ㎝, 표고에서 ±7.0 ㎝ 이었다. 즉, 지상기준점측량에서 GPS 수신기 1세트로 짧은 시간 관측할 수 있는 Network-RTK 측량은 GNSS 수신기 2세트 이상을 필요로 하는 RTK 측량이나 GNSS 수신기 2세트 이상으로 장시간의 관측이 필요한 Static GNSS 측량의 실용적인 대안임을 알 수 있었다. The purpose of this study is to evaluate the accuracy of Network-RTK(VRS) survey for applying to Ground Control Points(GCPs) survey required for mapping aerial photographs. Network-RTK has been serviced by National Geographic Information Institute since 2007. On the basis of the global coordinates system(ITRF2000), the coordinates of GCPs determined by Static GNSS survey with relative positioning techniques were regarded as accurate values. The coordinates of GCPs were also determined by Network-RTK survey using two kinds of receivers, and then they were converted into the global coordinates system(ITRF2000) by applying suitable geoid model and coordinate transformation. These coordinates of GCPs were compared with those from Static GNSS survey. The root mean squares error (RMSE) of coordinate differences between Network-RTK and Static GNSS was ±2.0㎝ in plane and ±7.0㎝ in height. Therefore, Network-RTK survey that enables single GNSS receiver to measure positions in short time is a practical alternative in positioning GCPs to either RTK survey that uses more than two sets of GNSS receivers or Static GNSS survey that requires longer observation time.
Determination of Gravity Anomaly Using Satellite Altimeter Data in the Great Lakes
김광배,이석배 대한토목학회 2002 KSCE JOURNAL OF CIVIL ENGINEERING Vol.6 No.3
In this paper, the determination of gravity anomalies in the Great Lakes using satellite altimeter data of GEOSAT Geodetic Mission (GM) and TOPEX/Poseidon is discussed. The seasonal change of lake level was observed from TOPEX/Poseidon satellite altimeter data. This analysis of lake level change was made to determine the mean lake surface profiles along the TOPEX/Poseidon repeat tracks. The least squares collocation was used to predict gravity anomalies. The gravity anomalies are determined by using mean lake surface profiles derived from TOPEX altimeter data and along-track slopes and azimuth derived from lake surface heights measured by the GEOSAT altimeter. To remove influences of the cycle-to-cycle time variation of lake level, along-track slopes of altimeter height are used. These results are compared to the exisiting surface gravit data measured in the Great Lakes. The gravity anomaly in the Lake Huron derived from the altimeter data using the least squares collocation shows slightly better comparison with the surface gravity anomaly than that implied by the EGM-96 gravity model.