http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
사무용 폐지에서 유래된 글루코오스를 이용한 레불린산 전환
반세은 ( Se-eun Ban ),박윤 ( Yoon Park ),이성초 ( Sung-cho Yi ),임예은 ( Ye-eun Lim ),이재원 ( Jae-won Lee ) 한국목재공학회 2020 한국목재공학회 학술발표논문집 Vol.2020 No.1
폐지는 우수한 셀룰로오스 자원으로, 고부가가치 화학물질 생산 원재료로 활용할 경우 경쟁력 확보에 매우 유리하다. 폐지에 포함된 셀룰로오스는 목질계로부터 유래하며, 글루코오스의 β-1, 4 glucoside 결합으로 이루어진 쇄상 고분자 물질이다. 셀룰로오스는 가수분해에 의해 글루코오스로 분해되며 글루코오스는 다양한 용도로 사용될 수 있다. 글루코오스 전환으로 얻어진 레불린산은 카르복실기와 케톤기를 포함하여 반응성이 좋으며 다양한 용매를 사용할 수 있어 그 사용가치가 높다. 본 연구에서는 폐지와 참나무를 물리적·화학적 전처리 없이 효소가수분해를 수행한 후 액상가수분해 산물을 이용해 레불린산을 생산하였다. 사전연구에서 바이오매스와 sodium citrate buffer의 침지비율과 효소가수분해 전 침지시간을 결정하였다. 글루코오스 수율을 높이기 위해 효소가수분해 과정에서 효소와 바이오매스를 추가적으로 투입하였다. 참나무의 경우 글루코오스 수율은 3.68%에서 5.98%로 개선되지 않았지만 폐지는 23.95%에서 48.36%으로 글루코오스 수율이 증가하였다. 이후 폐지와 참나무 효소가수분해 액상에 72% 황산 0.1~0.3ml을 첨가 후 oil bath에서 180 ℃, 2시간조건으로 반응하여 레불린산을 생산하였다. 그 결과 폐지의 액상에서 0.015~0.712 g/L의 레불린산이 생성되었으며 참나무 액상에서는 0.112~0.912 g/L의 레불린산이 생성되었다.
사무용 폐지에서 유래된 글루코오스를 이용한 레불린산 생산
반세은(Se-Eun Ban),박윤(Yoon Park),이성초(Sung-Cho Yi),임예은(Ye-Eun Lim),이재원(Jae-Won Lee) 한국신재생에너지학회 2021 신재생에너지 Vol.17 No.2
The optimal conditions for producing levulinic acid from office waste paper were investigated. Glucose was produced by enzymatic hydrolysis and its yield maximized by varying the soaking time of the substrate and amounts of enzyme and substrate. The optimal conditions to produce levulinic acid using the hydrolysate were determined by response surface methodology, with reaction temperature and catalyst (sulfuric acid) concentration as independent variables. The production model was assessed with an ANOVA regression analysis, and the results indicate its suitability for levulinic acid production (p, F, and lack-of-fit values were 0.003, 20.1, and 0.058, respectively). The optimal conditions were a reaction time of 56.27 min and catalyst concentration of 5.9% with a predicted yield of 2.588 g/L. We verified the findings under the same conditions and obtained 2.323 g/L of levulinic acid.
반세은 ( Se-eun Ban ),신윤정 ( Yoon-jung Shin ),이재원 ( Jae-won Lee ) 한국목재공학회 2021 한국목재공학회 학술발표논문집 Vol.2021 No.1
최근 코크스, 페놀레진계 흡착제 대신 바이오매스 유래 흡착제 생산이 활발히 이루어지고 있다. 목질계 바이오매스의 주요 구성성분은 셀룰로오스, 헤미셀룰로오스, 리그닌이며 탄소의 함량이 풍부해 흡착제 생산에 적합한 전구체이다. 목질계 바이오매스는 탄화되는 과정에서 구성성분들의 열분해로 높은 비표면적 및 다공성을 형성하며 이러한 구조적 특징은 수종의 구성성분 및 함량에 따라 상이하다. 특히 기공 크기와 구조의 특징은 향후 다양한 유기화합물을 제거하는 소재로 사용하는 데 있어 중요한 요소로 작용한다. 하지만 목질계 바이오매스의 구성성분 함량을 조절하여 생성된 탄화물의 특성을 비교하는 연구는 미흡한 실정이다. 따라서 본 연구에서는 셀룰로오스 및 리그닌의 함량이 탄화 특성에 미치는 영향을 확인하기 위한 실험을 진행하였다. 참나무와 낙엽송을 과산화수소-빙초산 용액과 혼합하여 80℃ 항온수조에서 1, 2, 3시간 동안 단계적으로 탈리그닌을 수행하였다. 이후 600℃에서 1시간 동안 탄화 과정을 거쳐 탄화물을 제작하여 탈리그닌 및 탄화물의 구조 특성을 분석하였다. 그 결과 참나무와 낙엽송 모두 탈리그닌 처리 시간이 길어짐에 따라 글루칸과 헤미셀룰로오스 유래 당 성분이 증가하였으며 리그닌은 제거되었다. 원시료 및 탈리그닌 탄화물의 비표면적은 탈리그닌 시료와 비교했을 때 크게 증가하였으며 기공크기는 감소하였다. 원시료 및 탈리그닌 탄화물은 약 90%의 탄소를 포함하였다. 열중량 분석(TGA)를 통해 탄화물의 높은 열 안전성을 확인하였으며 FE-SEM을 통해 탄화물의 기공형성을 확인하였다.
바이오매스 유래 흡착제에 의한 잔류농약 (다이아지논) 제거효과
반세은 ( Se-eun Ban ),임다정 ( Da-jung Lim ),김인선 ( In-seon Kim ),최준호 ( Jun-ho Choi ),이재원 ( Jae-won Lee ) 한국목재공학회 2020 한국목재공학회 학술발표논문집 Vol.2020 No.1
다이아지논은 살충제로 사용되고 있는 대표적인 농약 중 하나이다. 하지만 이것은 살포될 경우 일부는 작물체 표면에 부착되고 대부분은 토양 표면으로 떨어져 토양 내에 잔류하기 때문에 환경오염에 영향을 준다. 잔류농약 경감에 대한 연구는 대부분 잔류농약의 작물흡수이행 경감 및 안정성을 향상시킬 수 있는 흡착기술에 대한 연구가 진행되고 있다. 하지만 흡착기술을 적용하여 토양에 잔류하는 농약을 경감하기 위한 국내연구는 미비한 실정이다. 흡착제란 높은 탄소함량과 큰 비표면적 및 기공 부피를 갖는 물질을 의미하며 대표적 흡착제는 활성탄이다. 활성탄은 야자각, 코크스, 톱밥, 폐합성수지 등을 이용하여 제조되는데, 수입의존도가 높으며 수입량이 매년 증가하고 있다. 목질계 바이오매스는 풍부한 탄소물질이기 때문에 탄화, 활성화 공정 등을 거쳐서 잔류농약 제거에 적합한 세공구조, 비표면적을 갖는 흡착제를 생산 할 수 있다. 본 연구에서는 시중에서 판매되는 바이오매스 유래 흡착제 4종 (공기정화용 2종, 수질정화용 2종)과 효소가수분해 잔사를 탄화하여 얻은 탄화물 2종을 이용하여 토양에서의 다이아지논 제거 효과를 평가하였다. 또한 흡착제와 탄화물에 대한 비표면적, 원소분석, 표면구조 등을 분석하여 구조적 특징을 확인하였다.
How Many Sentinel Lymph Nodes Are Enough for Accurate Axillary Staging in T1-2 Breast Cancer?
Eun Jeong Ban,Jun Sang Lee,구자승,Se Ho Park,Seung-Il Kim,Byeong-Woo Park 한국유방암학회 2011 Journal of breast cancer Vol.14 No.4
Purpose: During a sentinel lymph node biopsy (SLNB) for breast cancer, the appropriate number of sentinel lymph nodes (SLNs) to be removed for accurate axillary staging is still controversial. We hypothesized that there might be an optimal threshold number of SLNs. We investigated how many SLNs should be removed to achieve an acceptable accuracy and ensure minimal morbidity. Methods: We reviewed data of 328 patients with invasive breast cancer who underwent SLNB followed by complete level I and II axillary dissection between January 2004 and December 2005. The false negative rate (FNR) and accuracy of SLNB according to the number of removed SLNs were evaluated. Results: The mean number of SLNs removed was 3.0 (range, 1-14), and that of total retrieved axillary lymph nodes was 17.5 (range, 10-40). In total, 111 (33.8%) patients had positive nodes on the permanent pathological report. Among them, 12 patients had negative SLNs;thus, the overall FNR of SLNB was 10.8% (12/111) and the accuracy was 96.3% (316/328). The FNR was 26.6% for a single SLN, 8.0% for two, and 11.1% for three. In cases where four or more SLNs were removed, the FNR decreased to 0% and accuracy reached 100%. Conclusion: Our data suggest that a SLNB should not only remove one or two of the hottest node(s) when other hot nodes exist. We also suggest that four might be an optimal threshold number of SLNs to be removed and that removal of more than four SLNs does not improve axillary staging accuracy.
초음파 촉매 공정에서 주파수와 고정된 고체 촉매가 라디칼 생성에 미치는 영향
조은주 ( Eun Ju Cho ),나승민 ( Seung Min Na ),이세반 ( Se Ban Lee ),김지형 ( Jee Hyeong Khim ) 한국물환경학회 2012 한국물환경학회지 Vol.28 No.2
The fixed solid catalysts such as glass bead, steel mesh, and TiO2 coated ceramic bead were used to investigate effect of radical production at different frequencies. The radical production rate at 300 kHz was faster than that at 35 kHz without solid, but the tendency was changed with the presence of glass bead. The presence of glass beads create non-continuous points between the solid and liquid phases leading to increased formation of cavitation bubbles. However, the radical production decreased when steel mesh was used at 35 kHz although the surface area of contact with liquid was same when glass bead was used. Hence the solid catalyst did not always enhance the radical production. The radical production using TiO2 coated ceramic bead was dramatically increased at 35 kHz due to the breakage of TiO2 coated ceramic bead. Therefore the radical productions at 300 kHz using fixed solid catalysts generally increased while at 35 kHz the results fluctuated according to the experimental conditions.
( Dao Kha Giang ),( Se-eun Ban ),( Chan-duck Jung ),( June-ho Choi ),( Hyo-lin Seong ),( Hoyong Kim ),( Jae-won Lee ) 한국목재공학회 2022 한국목재공학회 학술발표논문집 Vol.2022 No.1
In this study, the physicochemical properties of torrefied biomass was investigated depending on torrefaction temperature and particle size (< 100 mesh and > 100 mesh). The effect of torrefied biomass addition to the hydrophobicity and mechanical properties of biocomposites was evaluated by thermal, morphology, and mechanical analysis for food and beverages packaging application. The hemicellulose (mannan and xylan) content of the biomass decreased with increasing torrefaction temperature. Most mannan of larch and xylan of yellow poplar were degraded at sever condition (280℃ for 50 min). The biomass color was darker with increasing torrefaction temperature regardless species. Carbon content of larch (49.0%) was higher than that of yellow poplar (46.6%) and it was gradually increased with increasing torrefaction temperature. The tensile strength of PLA was 68.0 MPa, and the value decreased in all biocomposite. The tensile strength of biocomposite containing untreated biomass was decreased for both biomass regardless particle size used in this study. In the <100 mesh particle size, the tensile strength of biocomposite containing torrefied biomass decreased compare to that of untreated biomass.
Min Ju Lee,Se Hwan Ahn,Jong Han Kim,Su Yeong Kim,Ji-Eun Ban 이화여자대학교 의과학연구소 2017 EMJ (Ewha medical journal) Vol.40 No.3
Although Atrial flutter (AFL) in newborn infant with normal cardiac anatomy has benign clinical course, an intractable AFL is associated with an increased risk of development of heart failure and sudden death, and is still difficult to manage. It requires multiple external electrical cardioversions, and it shows a poor response to antiarrhythmic drug therapy. We report a case of a premature infant with an intractable AFL, which we successfully treated with oral flecainide and propranolol in spite of recurred AFL. A 1-month-old, 34-week gestation, premature baby presented with an irregular heart beat and irritability. An AFL with 2:1 atrioventricular conduction was documented. Because of the intractable AFL, repeated electrical cardioversion and amiodarone were continued for 14 days. However, amiodarone was discontinued in favour of flecainide and propranolol because of the recurrent AFL and newly developed transient hypothyroidism. During 1-year follow-up period, in which oral flecainide and propranolol were continued, no AFL was observed.