http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
공작기계용 개방형 HMI Platform 기반 사용자 라이브러리 운용, 관리 모듈 설계
손진호(J. Sohn),조정훈(J. H. Cho),이학철(H. C. Lee),정태근(T. K. Jung),이경태(K. T. Lee),박진욱(J. W. Park),나수인(S. I. Na) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
공작기계용 개방형 HMI Platform 은 하나의 단일 S/W Application 으로 구성되는 기존의 일반적인 HMI 시스템과 달리, 새로운 S/W Application 을 설치하거나, 기존 Application 이나 기능 혹은 모듈을 삭제할 수 있어 개별 생산 제조 현장에 최적화된 공작기계 사용 환경을 구성할 수 있다. 또한, 단위 기능이나 모듈을 라이브러리 형태로 만들고 이를 설치하여 다른 App 들이 공용으로 사용할 수 있는 기능을 제공할 수 있도록 지원한다. 이를 위해 공작기계용 개방형 HMI Platform 은 사용자 라이브러리를 설치 및 삭제할 수 있는 기능을 제공하며, 일관된 인터페이스와 데이터 교환 모델을 통해 손쉽게 주요 정보를 교환하고 이를 처리한 결과를 수용할 수 있도록 지원한다. 이 뿐만 아니라, 라이선스 관리 기능을 함께 제공하여 라이브러리에 대한 접근 권한 관리 기능도 지원한다. S/W Application 을 자유롭게 설치. 삭제할 수 있도록 함으로써 HMI 사용환경을 최적화할 수 있는 것과 마찬가지로 라이브러리를 설치 삭제함으로써 단위 App 의 기능을 확장하거나 최적화할 수 있게 지원하여 공작기계 HMI 환경을 좀 더 세밀하게 최적화 할 수 있는 수단을 제공한다 또한 각종 App 들이 공통으로 사용할 수 있는 필수 기능들을 라이브러리 형태로 제공함에 따라 공작기계용 S/W Application 개발을 활성화할 수 있으며, 라이선스 관리 기능 지원을 통해 라이브러리를 통한 과금 정책 운영의 수단을 제공함으로써 개방형 HMI 플랫폼 기반 소프트웨어 생태계 조성의 기반을 갖추게 된다.
계단형 텅스텐 결정면의 질소 흡착에 관한 연구 : Ⅱ. W(210) 및 W(310)면
최대선(D. S. Choi),한종훈(J. H. Han),백선목(S. M. Paik),박노길(N. G. Park),김욕욱(Y. W. Kim),황정남(C. N. Whang) 한국진공학회(ASCT) 1996 Applied Science and Convergence Technology Vol.5 No.4
장전자 방출법으로 텡스텐 (210)면 및 (310)면(100)면의 질소 흡착에 의한 일함수의 변화에 heat of desorption을 측정하였으며 Thermal Desortion Spectra(TDS) 결과로부터 adsorption site를 예측하였다. 텅스텐 (210)면 및 (310)면에 에 질소가 흡착될 때 흡착율에 따라 일함수는 증가하다가 각 면에 대하여 흡착율 5 Langmuir일때 최대 변화량 0.29 eV및 0.20 eV에서 포화되었다. TDS 결과는 이 면들은 낮은 dose의 영역에서 각각 3개의 흡착 site가 있음을 보였으며 이 흡착 site들 중 α₁state의 spectrum의 강도는 (210)면에서 보다 (310)면에서 상대적으로 강해짐을 보였다. 또한 (210)와 (310)면의 α₁ 과 β₂ state의 흡착 site에 흡착된 질소의 dipole moment의 방향은 이 흡착 site들에 대응되는 (100)면의 α₁ 과 β₂state의 흡착 site에 흡착된 질소의 dipole moment의 방향과 반대 방향으로 측정되었으며 이 현상으로부터 질소의 상대적인 흡착 위치를 예측하였다. The heat of desorption and the work function change induced by nitrogen adsorption on the stepped tungstein surface planes, W(210) and W(310), are measured using the Field Electron Emission Microscope(FEM). The adsoption sites are predicted from the Thermal Desortion Spectra(TDS). The work function change of both W(210) and W(310) planes increase as increasing the nitrogen dose and saturates at the nitrogen dose about 5 Langmuir to 0.29 eV and 0.20 ev respectively. We find three adsorption site on each plane for the low dose range. The TDS result shows that the intensity of α₁, state on W(310) is much stronger than that of α₁ state on W(210), and the direction of nitrogen dipole moment adsorbed on the sites correspond to α₁, and β₂ states on W(210) and W(310) planes are in the opposite direction to that of the equivalent states on W(100) plane. From this observation we can predict the relative atomic position in the zdirection (perpendicular direction to the surface) of nitrogen molecules/atoms adsorbed on these sites.