略論明淸戱曲對小說的主動接受

李眞瑜 中國語文硏究會 1995 中國語文論叢 Vol.9 No.-

Supercapacitors with ultrahigh energy density based on mesoporous carbon nanofibers: Enhanced double-layer electrochemical properties

Li, Zhen-Yu,Akhtar, M. Shaheer,Yang, O-Bong Elsevier 2015 Journal of alloys and compounds Vol.653 No.-

<P><B>Abstract</B></P> <P>High performance electrochemical double-layer (EDL) supercapacitor was fabricated with highly efficient electro-active electrode based on mesoporous carbon nanofibers (MCFs) materials. The prepared MCFs from dextrose as carbon source exhibited the high surface to volume ratio, large pore volume and high mesoporous nature. The cyclic voltammetry, electrochemical impedance and galvanostatic charge–discharge measurements were carried out to investigate the capacitive and electrochemical behavior of fabricated EDL supercapacitor based on MCFs electrode. A reasonably high specific capacitance of 201 F/g at current density of 0.6 A/g was achieved by the fabricated EDL supercapacitor based on MCFs electrode. A relation of capacitive performance, specific surface area, accessible average pore size and current density was manifested to evaluate the impact of capacitance parameters. The fabricated EDL supercapacitor based on MCFs electrode attained the ultra high energy density of 54.7 W h/kg and reasonable power density of 0.842 kW/kg at the current density of 0.6 A/g. The fabricated EDL supercapacitor manifested an excellent stability by keeping about 88% of initial capacity after 1000 cycles.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Highly efficient electro-active electrode prepared by mesoporous carbon nanofibers. </LI> <LI> High performance electrochemical double layer (EDL) supercapacitor was fabricated. </LI> <LI> EDL supercapacitor with MCFs electrode showed the high specific capacitance of 201 F/g. </LI> <LI> Ultra high energy density of 54.7 W h/kg and power density of 0.842 kW/kg attained. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Microstructure evolution and enhanced vacuum tribological performance of Ni-doped WS₂ composite coating

Xu, Shu-Sheng,Weng, Li-Jun,Liu, Yu-Zhen,Kang, Kyeong-Hee,Kim, Chang-Lae,Kim, Dae-Eun Elsevier Sequoia 2017 Surface & coatings technology Vol.325 No.-

<P><B>Abstract</B></P> <P>Ni-doped WS<SUB>2</SUB> composite coatings with various Ni contents were co-deposited using a radio frequency sputtering system on silicon wafer and AISI 440C stainless steel substrates. The microstructural characteristics of the WS<SUB>2</SUB>-Ni composite coatings and their tribological properties in vacuum were assessed. During introduction of Ni dopant in the WS<SUB>2</SUB>-Ni composite coating the sulfur/tungsten (S/W) ratio in the coating increased due to reduced preferential resputtering of sulfur atoms in the growing coating. The microstructure of the WS<SUB>2</SUB>-Ni composite coating varied from a fine columnar structure for Ni content equal to or less than 7.7at.% to a featureless structure as the Ni content increased further. The Ni dopant inhibited the growth of the coarse columnar WS<SUB>2</SUB> platelets which was accompanied by nanocrystallization and amorphization of the composite coating structure. WS<SUB>2</SUB>-Ni composite coatings with fine columnar structure exhibited relatively low hardness but showed a high tendency to form a lubricating transfer layer. It also demonstrated low brittleness and prolonged wear life in vacuum condition compared to coatings with dense featureless structure. The variation in tribological performance between the composite coatings resulted from the different wear mechanisms associated with their distinct microstructures.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Microstructure of WS<SUB>2</SUB> coating was modified by incorporating Ni as a dopant. </LI> <LI> The introduction of Ni increased the S/W ratio of the WS<SUB>2</SUB> composite coating. </LI> <LI> High Ni content in the WS<SUB>2</SUB> coating led to high brittleness and low wear resistance. </LI> <LI> WS<SUB>2</SUB>–5at.% Ni coating showed 5 times longer wear life than pure WS<SUB>2</SUB> film in vacuum. </LI> <LI> Superior tribological properties were attributed to transfer layer and high hardness. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Rotary ultrasonic machining of woven CFRP composite in a cryogenic environment

Thirumalai Kumaran, S.,Ko, Tae Jo,Li, Changping,Yu, Zhen,Uthayakumar, M. ELSEVIER SCIENCE 2017 JOURNAL OF ALLOYS AND COMPOUNDS Vol.698 No.-

<P><B>Abstract</B></P> <P>In the present study, rotary ultrasonic machining (RUM) was adopted to perform drilling of carbon fiber reinforced plastics (CFRP) in a cryogenic environment. An L27 orthogonal array was selected to conduct experiments by varying the spindle speed (denoted as N), feed rate (denoted as f), and ultrasonic power (denoted as P). The thrust force (denoted as Fz), exit burr area, and surface roughness (denoted as Ra) were measured to evaluate the machining performance. The influence of process parameters and the regression model were derived for each output quality response. Additionally, multi-objective optimization was performed using desirability analysis, and the predicted levels were used for confirmation. The results indicated that the feed rate (f) contributed more to the thrust force (Fz) by 45.85% and a maximum thrust force was recorded at 0.1 mm/rev. A decrease in spindle speed (N) was associated with an increase in feed rate (f) and ultrasonic power (P), and it resulted in minimum exit burr area. The influence of ultrasonic power (P) was highly significant in reducing burrs with a contribution of 52.45%. Conversely, the surface roughness (Ra) of the drill holes decreased at 3000 rpm, and this was attributed to the brittle fracture of the fibers at a lower temperature. Both N (30.88%) and f (30.83%) had an equal influence on producing a better surface finish in the drill holes. Furthermore, the predicted optimal settings were used to validate the results and were found to be within 95% confidence and prediction interval. Finally, the microscopic images of tool wear, burr formation, and drill hole surface morphology were analyzed and examined.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Prediction of regression model for RUM of CFRP in a cryogenic environment. </LI> <LI> Output responses such as thrust force, burr area and roughness are investigated. </LI> <LI> The adequacy of an ANOVA model is checked for each output response. </LI> <LI> Optimization is performed by desirability analysis and the results are validated. </LI> <LI> Tool wear, burr formation, and drill hole surface morphology are analyzed. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Effect of Sub-Structure and Precipitation Behavior on Mechanical Properties of Al–xCu–Li Alloys

Yu‑zhuo Li,Guang‑jun Zeng,Ding‑ding Lu,Zhen‑zhen Liu,San‑xi Deng,Peng‑cheng Ma,Yong‑lai Chen,Rui‑feng Zhang,Jin‑feng Li 대한금속·재료학회 2023 METALS AND MATERIALS International Vol.29 No.11

The tensile properties and microstructure of extruded and cold rolled 2A55 Al–Li alloys with different Cu content werestudied. After solution treatment, the strength of extruded sheets is slightly higher than that of cold rolled sheets due to strongdeformation texture and high density of substructure. However, the strength change order is different with the increase of Cucontent with T6-24 h. The extruded sample with higher Cu content have higher strength due to many dense T1precipitates. The δ′/θ′/δ′ composite precipitates and θ′ precipitates suppress the formation of T1precipitates, which cause cold rolled samplewith higher Cu content shows lower strength. Additionally, many fine T1precipitates nucleate at the sub-grain boundariesformed in the extrusion process, which have a significant effect on the mechanical property.

Colorectal Cancer Concealment Predicts a Poor Survival: A Retrospective Study

Li, Xiao-Pan,Xie, Zhen-Yu,Fu, Yi-Fei,Yang, Chen,Hao, Li-Peng,Yang, Li-Ming,Zhang, Mei-Yu,Li, Xiao-Li,Feng, Li-Li,Yan, Bei,Sun, Qiao Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.7

Objectives: Understanding the situation of cancer awareness which doctors give to patients might lead to prognostic prediction in cases of of colorectal cancer (CRC). Methods: Subsets of 10,779 CRC patients were used to screen the risk factors from the Cancer Registry in Pudong New Area in cancer awareness, age, TNM stage, and gender. Survival of the patients was calculated by the Kaplan-Meier method and assessed by Cox regression analysis. The views of cancer awareness in doctors and patients were surveyed by telephone or household. Results: After a median observation time of 1,616 days (ranging from 0 to 4,083 days) of 10,779 available patients, 2,596 of the 4,561 patients with cancer awareness survived, whereas 2,258 of the 5,469 patients without cancer awareness and 406 of the 749 patients without information on cancer awareness died of the disease. All-cause and cancer-specific survival were poorer for the patients without cancer awareness than those with (P < 0.001 for each, log-rank test). Cox multivariate regression analysis showed that cancer concealment cases had significantly lower cancer-specific survival (hazard ratio (HR) = 1.299; 95 % confidence interval (CI): 1.200-1.407)and all-cause survival (HR = 1.324; 95 % CI: 1.227-1.428). Furthermore, attitudes of cancer awareness between doctors and patients were significantly different (P < 0.001). Conclusion: Cancer concealment, not only late-stage tumor and age, is associated with a poor survival of CRC patients.

Pseudonocardia rhizophila sp. nov., a novel actinomycete isolated from a rhizosphere soil

Li, Jie,Zhao, Guo-Zhen,Huang, Hai-Yu,Zhu, Wen-Yong,Lee, Jae-Chan,Kim, Chang-Jin,Xu, Li-Hua,Zhang, Li-Xin,Li, Wen-Jun Springer-Verlag 2010 Antonie van Leeuwenhoek Vol.98 No.1

Tumor-Derived Transforming Growth Factor-β is Critical for Tumor Progression and Evasion from Immune Surveillance

Li, Zheng,Zhang, Li-Juan,Zhang, Hong-Ru,Tian, Gao-Fei,Tian, Jun,Mao, Xiao-Li,Jia, Zheng-Hu,Meng, Zi-Yu,Zhao, Li-Qing,Yin, Zhi-Nan,Wu, Zhen-Zhou Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.13

Tumors have evolved numerous mechanisms by which they can escape from immune surveillance. One of these is to produce immunosuppressive cytokines. Transforming growth factor-${\beta}$(TGF-${\beta}$) is a pleiotropic cytokine with a crucial function in mediating immune suppression, especially in the tumor microenvironment. TGF-${\beta}$ produced by T cells has been demonstrated as an important factor for suppressing antitumor immune responses, but the role of tumor-derived TGF-${\beta}$ in this process is poorly understood. In this study, we demonstrated that knockdown of tumor-derived TGF-${\beta}$ using shRNA resulted in dramatically reduced tumor size, slowing tumor formation, prolonging survival rate of tumor-bearing mice and inhibiting metastasis. We revealed possible underlying mechanisms as reducing the number of myeloid-derived suppressor cells (MDSC) and $CD4^+Foxp3^+$ Treg cells, and consequently enhanced IFN-${\gamma}$ production by CTLs. Knockdown of tumor-derived TGF-${\beta}$ also significantly reduced the conversion of na$\ddot{i}$ve $CD4^+$ T cells into Treg cells in vitro. Finally, we found that knockdown of TGF-${\beta}$ suppressed cell migration, but did not change the proliferation and apoptosis of tumor cells in vitro. In summary, our study provided evidence that tumor-derived TGF-${\beta}$ is a critical factor for tumor progression and evasion of immune surveillance, and blocking tumor-derived TGF-${\beta}$ may serve as a potential therapeutic approach for cancer.

Isoindolin-1-ones from the stems of Nicotiana tabacum and their antiviral activities

Guang-Yu Yang,Jia-Meng Dai,Zhen-Jie Li,Jin Wang,Feng-Xian Yang,Xin Liu,Jing Li,Qian Gao,Xue-Mei Li,Yin-Ke Li,Wei-Guang Wang,Min Zhou,Qiu-Fen Hu 대한약학회 2022 Archives of Pharmacal Research Vol.45 No.8

In previous studies, several isoindolin-1-oneanalogs that exhibited signifi cant anti-tobacco mosaic virus(anti-TMV) activities were isolated from Nicotiana tabacum . Since gene-editing mutants provide a new sample for thediscovery of active metabolites, we focused on the stems ofYN-18–23 (a mutant N. tabacum for gene editing with thealkaloid metabolic pathway cultivated by Yunnan TobaccoCompany), which led to the isolation of four new ( 1–4 )and four known ( 5–8 ) isoindolin-1-ones. To the best of ourknowledge, nicindole C ( 3 ) is the fi rst subclass of isoindolin-1-one bearing a pentacyclic ketone, while nicindole D ( 4 )is the fi rst example of isoindolin-1-one bearing a methylpyridin-2-(1 H )-one moiety. Compounds 1–4 were testedfor their anti-TMV activities, and the results revealed thatcompounds 1 , 3 , and 4 exhibited high anti-TMV activities atconcentrations of 20 μM with inhibition rates of 48.6, 42.8,and 71.5%, respectively. These rates are higher than the inhibitionrate of the positive control (33.2%). The mechanisticstudy of compound 4 , which had the highest anti-TMV activityrevealed that increased potentiation of defense-related enzyme activities and downregulation of expression of theNtHsp70 protein may induce resistance in tobacco againstthe viral pathogen TMV. Molecular docking studies alsorevealed that the isoindolin-1-one substructure is fundamentalfor anti-TMV activity. The methyl-pyridin-2-(1 H )-onemoiety in compound 4 and the 2-oxopropyl groups in compounds1 and 3 at the N -2 position may increase inhibitoryactivities. This study of the structure–activity relationshipis helpful for fi nding new anti-TMV activity inhibitors. Tostudy whether the isoindolin-1-ones have broader antiviralactivities, compounds 1–4 were also tested for their antirotavirusactivities. Compound 4 exhibited high anti-rotavirusactivity with a therapeutic index (TI) value of 20.7. This TI value is close to that of the positive control (20.2).

Efficacy and Safety of Laser Surgery and Transurethral Resection of the Prostate for Treating Benign Prostate Hyperplasia: a Network Meta-analysis

Wang, Li,Yu, Qiu-Yan,Liu, Yan,Zhu, Zhen-Li,Huang, Yuan-Wei,Li, Ke Asian Pacific Journal of Cancer Prevention 2016 Asian Pacific journal of cancer prevention Vol.17 No.9

Background: Traditional meta-analyses or systematic reviews of randomized controlled trials (RCTs) have been used to compare laser surgeries and transurethral resection of the prostate (TURP) for benign prostate hyperplasia (BHP), but they cannot provide a hierarchy regarding efficacy and safety of treatment. Objective: We therefore performed a network meta-analysis (NMA) to compare and create hierarchies for efficacy and safety of TUPR and laser surgeries for BPH. Materials and Methods: We searched for reports of RCTs published up to April 25, 2015. After methodological quality assessment and data extraction, we performed an NMA to compare TURP and laser surgeries for BPH. Results: We ranked the treatments of TURP and laser surgeries for BPH. For IPSS at 6 months, holmium laser resection of the prostate (HoLRP) ranked the first-best and at 12 months, holmium laser enucleation of the prostate (HoLEP). For Qmax at 6 and 12 months, HoLEP ranked the first-best; for operative time it was TURP; for cathedral removal time, diode laser enucleation of the prostate (DiLEP) ranked the first-best. Conclusions: Although TURP is considered the gold standard for treating BPH, it is not better in terms of efficacy and safety compared with the laser surgery. Our NMA created hierarchies for the 9 types of surgery in terms of efficacy and safety, which should help clinicians choose the best approach for the individual patient.