http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Yooseob Song,William Peterson 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.3
A constitutive model for niobium with the effect of dynamic strain aging is proposed. The crystal structure of metalshugely influences the dynamic strain aging phenomenon and causes considerable alterations in the material’s macroscopicmechanical responses. Dynamic strain aging needs to be accounted for in a constitutive model to obtain accurate predictionsof material’s thermo-mechanical behaviors during deformation. The proposed constitutive model attempts to describe thematerial’s flow stress responses during deformation by separating the flow stress contributions into the athermal component,thermal component, and dynamic strain aging component. Two different mathematical equations are proposed to model thedynamic strain aging component. The proposed model attempts to describe the mechanical response of niobium for a widerange of strain rates: from quasi-static loading ( ̇ = 0.001 s−1 ) to dynamic loading ( ̇ = 3300 s−1 ) across the temperatureranges 77 K–800 K.
Jung, Hyun Jun,Song, Yooseob,Hong, Seong Kwang,Yang, Chan Ho,Hwang, Sung Joo,Jeong, Se Yeong,Sung, Tae Hyun Elsevier 2015 Sensors and actuators. A Physical Vol.222 No.-
<P><B>Abstract</B></P> <P>The purpose of the current study is to design and optimize a piezoelectric impact-based micro wind energy harvester (PIMWEH) as a power source for wireless sensor networks. First, using new PIMWEH design, numerical simulation, and experimental comparison analysis, we determined the most durable PIMWEH shape for application as a power source of WSNs. The experimental results show that the optimized PIMWEH generated 2.8mW (RMS value) and did not crack within 40h. Second, to supply power for sensor operation, we performed an experiment using a rectifying circuit, an AC–DC converter, and an electrical charger. The experimental results show a pure DC voltage signal of 3.3V, and the output power was 1.0mW (3.1mW/cm<SUP>3</SUP>). A charging energy of 0.845J was obtained in 24min. Third, we calculated the efficiency of the PIMWEH to evaluate its performance. Using a three-step energy conversion process (using wind turbine, PZT, and LTC3588-1), an overall PIMWEH power conversion efficiency of 3.2% was obtained. For one day, the PIMWEH could supply power that is 6263–25055 times the power requirement of a commercialized ZigBee transmission. In addition, transmitting signals at intervals from 3.4 to 13s was made possible.</P>
Jung, Hyun Jun,Moon, Jae Won,Song, Yooseob,Song, Daniel,Hong, Seong Kwang,Sung, Tae Hyun Institute of Pure and Applied Physics 2014 Japanese Journal of Applied Physics Vol. No.
<P> The purpose of this study is to design a piezoelectric energy harvester (PEH) that not only resists damage but also generates a higher power when impact is applied. To increase the generated power and durability a PEH, in this study, we investigated a new model and carried out numerical simulations of and experiments on the PEH. The numerical simulation results show that the stress distribution of the proposed PEH is more uniform than that of a conventional impact-type PEH. Thus, the proposed PEH decreases its possibility of being damaged. Experimental results for power under a matched impedance condition show that the maximum RMS powers of the conventional impact-type and proposed PEHs were 0.69mWat 16 kΩ and 3.97mW at 7 kΩ, respectively. Furthermore, the peak power of the proposed PEH was 518mW, which was 3,047% higher than that of the conventional impact-type PEH having a peak power of 17mW. </P>
딥러닝 기반 농업용 사회기반시설물의 파쇄손상 보수 재료량 산출
조준휘 ( Junhwi Cho ),김채현 ( Chaehyeon Kim ),송유섭 ( Yooseob Song ),조영오 ( Youngoh Joh ),연재흠 ( Jaeheum Yeon ) 한국농공학회 2023 한국농공학회 학술대회초록집 Vol.2023 No.0
농업 환경에서 수로와 같은 콘크리트 기반의 농업용 사회기반시설물은 물과 항상 접촉하고 있으며, 이로 인한 수분 침투의 가능성으로 다른 사회기반시설물보다 열화 현상의 발생 가능성이 높다. 특히 콘크리트 표면 일부가 파손되거나 떨어져 나가는 현상인 파쇄손상은 손상 부위를 통해 콘크리트 내부로의 수분 침투를 더욱 쉽게 만들어, 이로 인한 열화 현상을 촉진 시키므로 이를 방지하기 위한 보수 작업이 필요하다. 기존 파쇄손상의 보수 작업은 노동 및 시간 집약적이며, 작업자의 경험에 의존하여 보수 면적과 재료량을 계산하기 때문에 각 작업자 간의 계산 오차 및 동일 작업자 계산 시에도 작업자의 현재 상태에 따라 계산 오차가 발생할 수 있다. 또한 보수 작업은 현장에서 수행되며, 특히 수로 보수의 경우 작업자의 안전 및 보수재료 양생기간 확보를 위해 물의 흐름을 차단해야 하는 단점이 존재한다. 이러한 단점을 극복하기 위해 본 연구에서는 딥러닝 기반의 You Only Look Once(YOLO) 알고리즘과 정확한 보수 면적 및 보수 재료량 계산을 위해 자체 개발한 프로그램을 활용한 파쇄손상의 보수 재료량 산출 방법을 제안한다. 제안된 방법은 고화질 카메라를 사용하여 사회기반시설물의 상태를 촬영하였으며, 파쇄손상에 대해 YOLO 알고리즘의 최신 버전인 YOLOv8을 학습시킨 후 학습된 YOLOv8을 활용한 사회기반시설물 상태 사진 분석을 통해 사진 속 파쇄손상 탐지 및 면적을 계산하였다. 이후 계산된 파쇄손상의 면적 정보를 기반으로 자체 개발한 프로그램에 입력하여 국토교통부에서 제시한 파쇄손상의 부분 단면 보수의 면적 산출 기준(KDS 44 50 20)으로 컴퓨터가 일관적이고 정확한 계산을 통해 보수 면적과 보수 재료량을 계산하였다. 본 연구에서 제안된 방법은 기존 노동과 시간 집약적인 파쇄손상 탐지 및 면적 계산을 극복할 것이며, 일관되고 정확한 계산을 통해 작업자 계산에 의한 오차의 영향을 줄일 수 있을 것으로 기대한다.
탁문호,송유섭,전혜관,박대효,Tak, Moonho,Song, Yooseob,Jeon, Hye-Kwan,Park, Taehyo 한국전산구조공학회 2013 한국전산구조공학회논문집 Vol.26 No.4
In this paper, an accuracy analysis of parallel method based on non-overlapping domain decomposition method is carried out. In this approach, proposed by Tak et al.(2013), the decomposed subdomains do not overlap each other and the connection between adjacent subdomains is determined via simple connective finite element named interfacial element. This approach has two main advantages. The first is that a direct method such as gauss elimination is available even in a singular problem because the singular stiffness matrix from floating domain can be converted to invertible matrix by assembling the interfacial element. The second is that computational time and storage can be reduced in comparison with the traditional finite element tearing and interconnect(FETI) method. The accuracy of analysis using proposed method, on the other hand, is inclined to decrease at cross points on which more than three subdomains are interconnected. Thus, in this paper, an accuracy analysis for a novel non-overlapping domain decomposition method with a variety of subdomain numbers which are interconnected at cross point is carried out. The cause of accuracy degradation is also analyze and establishment of countermeasure is discussed. 본 논문에서는 새로운 비중첩 영역 분할 기법을 바탕으로 한 병렬해석의 정확도 분석이 수행된다. Tak 등(2013)에 의해 제안된 이 방법에서 분할된 하위도메인들은 서로 중첩되지 않으며 계면요소(interfacial element)라 불리는 가상연결유한요소를 통해 서로 간의 관계가 결정된다. 이 접근법의 주요 장점은 영역 분할시 floating 도메인에서 발생할 수 있는 특이강성행렬(singular stiffness matrix)을 계면요소의 결합을 이용하여 가역행렬(invertible matrix)로 변환할 수 있다는 것과 기존의 FETI법에 비하여 해석시간과 스토리지(storage) 사용을 줄일 수 있다는 것이다. 반면에 3개 이상의 하위도메인들이 한 점에서 연결되는 경우를 의미하는 cross point에서는 해석의 정확도가 저하되는 경향이 나타났다. 따라서 본 논문에서는 새로운 비중첩 영역 분할기법에 대해 다양한 영역분할의 경우에 따라 발생하는 하나의 cross point에 접촉하는 하위도메인의 개수에 따른 정확도 분석이 수행되고 정확도가 저하되는 원인분석 및 대책이 논의된다.