http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
티타니아 세라믹 熔射皮膜의 機械的 特性에 미치는 熔射條件의 影響에 관한 硏究
김영식,김영식,Kim, Yeong-Sik,Kim, Yeong-Sik 한국마린엔지니어링학회 1991 한국마린엔지니어링학회지 Vol.15 No.3
The purpose of this investigation is to examine the effects of spraying conditions on the mechanical properties of flame-sprayed titania ceramic coating layer. Titania ceramic was sprayed onto the mild steel substrate under the various spraying conditions. Spraying distances were 100, 150, 200, 250mm respectively and pinch air pressures were 0.2 0.3, 0.4 MPa at each spraying distance. The mechanical properties such as microhardness, adhesive strength and erosion wear resistance were tested for the specimens sprayed under the various spraying conditions above mentioned. The optimum operational conditions obtained through the experimental results were 150mm of spraying distance and 0.3 MPa of pinch air pressure.
고탄소강의 연속 건식 신선 공정에서 선재의 온도 예측 기법 개발
김영식,김동환,김병민,김민안,박용민,Kim, Yeong-Sik,Kim, Dong-Hwan,Kim, Byeong-Min,Kim, Min-An,Park, Yong-Min 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.2
Wire drawing process of the high carbon steel with a high speed is usually conducted at room temperature using a number of passes or reductions through consequently located dies. In multi-stage drawing process, temperature rise in each pass affects the mechanical properties of final product such as bend, twist and tensile strength. Also, this temperature rise during the deformation is the reason that the wire in drawing process is broken by the embrittlement due to rapid strain aging effect. This paper presents the estimation of the wire temperature for the multi-stage wire drawing process. Using the proposed calculation method of wire temperature, temperature rise at deformation zone as well as temperature drop in block considering the heat transfer between the block and wire were calculated. As these calculated wire temperatures were applied to the real industrial fields, it was known that the calculated results were in a good agreement with the measured wire temperature.
김영식,Kim, Yeong-Sik 한국대학교육협의회 2006 大學敎育 Vol.142 No.-
정부주도적인 획일정책이나 지시명령적 관여 등 80년대의 정치.사회적 상황이나 시대적 배경이 대교협 발족의 근본적 동기가 되었다고 본다. 대학들은 근원적으로 그 자체가 하나의 자치기구이며, 학문공동체이며, 자기통제기관이다. 이러한 대학의 속성을 살리기 위해 정부와 대학 간의 협의조정기구로서 협의체의 필요성을 깨닫고, 우리나라 대학의 자율성 신장을 위해 하나의 이정표를 세웠다는 점에서 대교협의 큰 의의가 있다고 평가된다.
김영식,Kim, Yeong-Sik 한국광학기기산업협회 2006 光學世界 Vol.105 No.-
레이저 광선이 가져다준 많은 장점과 편리함에 비하면 레이저의 위험성이라는 부정적인 요소가 차지하는 비중은 미미하다고 볼 수 있다. 그러나 우려되는 것은 레이저를 생산하거나 이용하는 공장의 작업장을 비롯하여, 수술 또는 치료용으로 사용하는 의료기관의 수가 지속적으로 늘어나고 있음을 감안할 때, 이러한 장소에서 레이저를 동작시키는 사용자를 포함한 주변사람이 레이저광선에 직접 또는 간접적으로 노출되어 사고를 당할 확률도 그만큼 높아지고 있다는 점이다.