http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Material Models for Accurate Simulation of Sheet Metal Forming and Springback
Fusahito YOSHIDA 한국소성가공학회 2010 기타자료 Vol.2010 No.6
For anisotropic sheet metals, modeling of anisotropy and the Bauschinger effect is discussed in the framework of Yoshida-Uemori kinematic hardening model incorporating with anisotropic yield functions. The performances of the models in predicting yield loci, cyclic stress-strain responses on several types of steel and aluminum sheets are demonstrated by comparing the numerical simulation results with the corresponding experimental observations. From some examples of FE simulation of sheet metal forming and springback, it is concluded that modeling of both the anisotropy and the Bauschinger effect is essential for the accurate numerical simulation.
Reduction of Springback of Sheet Metals by Bottoming
Takayuki Ogawa,Atsushi Hirahara,Fusahito Yoshida 한국소성가공학회 2010 기타자료 Vol.2010 No.6
The effect of bottoming on the reduction of springback is investigated by performing V-air-bending experiment on a high strength steel sheet of TS590MPa and the corresponding FE simulation. From the experiment, it was found that the springback is drastically decreased with increasing bottoming force. This is mainly due to the reduction of bending moment by compressive load acting normally to the sheet. At an early stage of bottoming, springback is also influenced by the change of geometrical rigidity of the bent sheet due to the straightening of ridge line warp. Since bottoming is a process of reverse deformation of tension-compression, the Bauschinger effect of materials should be taken into account for its accurate numerical simulation. 3D FE simulation using Yoshida-Uemori kinematic hardening model predicts well the bottoming effect.
Elasto-Plasticity Behavior of Type 5000 and 6000 Aluminum Alloy Sheets and Its Constitutive Modeling
Shohei TAMURA,Satoshi SUMIKAWA,Hiroshi HAMASAKI,Takeshi UEMORI,Fusahito YOSHIDA 한국소성가공학회 2010 기타자료 Vol.2010 No.6
To examine the deformation characteristic of type 5000 and 6000 aluminum alloy sheets, uniaxial tension, biaxial stretching and in-plane cyclic tension-compression experiments were performed, and from these, r-values (r?, r45 and r90), yield loci and cyclic stress-strain responses were obtained. For the accurate description of anisotropies of the materials, high-ordered anisotropic yield functions, such as Gotoh’s biquadratic yield function and Barlat’s Yld2000-2d, are necessary. Furthermore, for the simulation of cyclic behavior, an advanced kinematic hardening model, such as Yoshida-Uemori model (Y-U model), should be employed. The effect of the selection of material models on the accuracy of the springback prediction was discussed by performing hat bending FE simulation using several yield functions and two types of hardening laws (the isotropic hardening model and Y-U model)
MAGNETIC PROPERTIES OF FePt₃ ORDERED ALLOY
H.Yoshida,H.Fujimorl,T.Kaneko,S.Abe,K.Watanabe,M.Matsumoto,T.Yoshida,T.Kanomata 한국자기학회 1995 韓國磁氣學會誌 Vol.5 No.5
The magnetic properties for Fe₂₄Pt_(76) and Fe_(26)Pt_(74) have been investigated. The temperature vs. magnetic susceptibility curve for Fe₂₄Pt_(76) had no peak near the Neel temperature. The magnetization process at 4.2 K showed only a linear variation up to the high magnetic field of 240 kOe. That for Fe_(26)Pt_(74) at 77 K showed a metamagnetic transition at 100 kOe. These properties were discussed on the basis of a band picture.
Interrogative Feature Checking in Japanese and Korean
( Keiko Yoshida ),( Tomoyuki Yoshida ) 한국언어정보학회 1996 국제 워크샵 Vol.1996 No.-
This paper discusses the feature checking mechanism of interrogative sentences in Japanese and Korean. We first focus on a phenomenon of omitting question markers in informal speech in Japanese and attempt to provide an account for it within the framework of Principles and Parameters approach. We argue that question markers can be omitted only if interrogative features of the sentence can be properly checked. In particular we claim that I-to-C head-movement is one of the options for interrogative feature checking in Japanese as well as languages without question markers. A close examination of Korean reveals certain differences between Korean and Japanese. Some theoretical consequences from this analysis are also discussed.
Incremental Parsing in Conditionals and Relative Clauses in Korean
Masaya Yoshida,윤수원,신정아 한국생성문법학회 2022 생성문법연구 Vol.32 No.4
The strong head-finality of Korean raises many potential challenges to incremental parsing. In languages like Korean, there is normally no indication of clause structure before the parser encounters the verb or the relative head at the end of the clause. This uncertainty of clause structure can potentially give rise to processing difficulty of verbs in head-final languages. Developing our earlier studies in Japanese (Yoshida 2006), we present four series of experiments in Korean (offline and online) to show that there are, however, cases where the processing of clause-final verbs can indeed be predicted and facilitated.
Yoshida Go,Ushirozako Hiroki,Hasegawa Tomohiko,Yamato Yu,Yasuda Tatsuya,Banno Tomohiro,Arima Hideyuki,Oe Shin,Mihara Yuki,Yamada Tomohiro,Ide Koichiro,Watanabe Yuh,Ushio Takasuke,Matsuyama Yukihiro 대한척추외과학회 2022 Asian Spine Journal Vol.16 No.3
Study Design: Single-center prospective study.Purpose: To investigate anterior spinal artery (ASA) status using preoperative selective angiography in patients undergoing surgery for thoracic ossification of the posterior longitudinal ligament (T-OPLL).Overview of Literature: Surgery for T-OPLL has a high risk of neurological complications, which might be associated with insufficient spinal cord blood flow.Methods: This study prospectively examined nine T-OPLL patients who underwent posterior thoracic decompression with kyphosis correction and instrumented fusion at Hamamatsu University School of Medicine between 2017 and 2019. All underwent preoperative selective angiography to detect and evaluate the Adamkiewicz artery and ASA. Intraoperative neuromonitoring and Doppler ultrasonography were performed to analyze neurological complications and spinal cord blood flow.Results: All nine patients showed ASA stenosis in the area of T-OPLL. In all patients, the Adamkiewicz artery was located between T7 and L2 and the area of ASA stenosis corresponded to the level of T-OPLL and greatest spinal cord compression; intraoperative Doppler ultrasonography confirmed the ASA defect at the same spinal level. The number of spinal levels from the Adamkiewicz artery to the most compressive OPLL lesion was greater in the two patients who developed postoperative neurological deficit compared to those who did not (5.5 vs. 2.3, p=0.014).Conclusions: This is the first study to report detection of ASA stenosis in patients with T-OPLL. Maintaining spinal cord blood flow is important in these patients to avoid neurological deterioration.
CURRENT STATUS OF THE INSTRUMENTS, INSTRUMENTATION AND OPEN USE OF OKAYAMA ASTROPHYSICAL OBSERVATORY
YOSHIDA MICHITOSHI The Korean Astronomical Society 2005 Journal of The Korean Astronomical Society Vol.38 No.2
Current instrumentation activities and the open user status of Okayama Astrophysical Observatory (OAO) are reviewed. There are two telescopes in operation and one telescope under reforming at OAO. The 188cm telescope is provided for open use for more than 200 nights in a year. The typical over-subscription rate of observation proposals for the 188cm telescope is ${\~}$ 1.5 - 2. The 50cm telescope is dedicated to $\gamma$-ray burst optical follow-up observation and is operated in collaboration with Tokyo Institute of Technology. The 91cm telescope will become a new very wide field near-infrared camera in two years. The high-dispersion echelle spectrograph (HIDES) is the current primary instrument for the open use of the 188cm telescope. Two new instruments, an infrared multi-purpose camera (ISLE) and an optical low-dispersion spectrograph (KOOLS), are now under development. They will be open as common use instruments in 2006.