Effects of ultrasonic treatment on the gel properties of microbial transglutaminase crosslinked soy, whey and soy–whey proteins

Qiang Cui,Xibo Wang,Guorong Wang,Rui Li,Xiaodan Wang,Shuang Chen,Jingnan Liu,Lianzhou Jiang 한국식품과학회 2019 Food Science and Biotechnology Vol.28 No.5

This paper studied the influences of diverse ultrasonic power treatments on the physico-chemical properties of soy–whey mixed protein induced by microbial transglutaminase. Two groups of 15% (m/v) of protein solution-sole protein (as control group) and mixed protein were prepared and processed under different ultrasonic powers for 30 min. After ultrasonic power treatments, gel properties were significantly increased: under 300 W, the gel hardness of mixed protein reached a maximum of 998.9 g, with its water binding capacity scoring a maximum of 87%. According to the analysis of fluorescence emission spectrum, the fluorescence intensity and maximum absorption peak had changed, for different ultrasonic power treatments had exposed more groups. The Fourier Transform Infrared Spectroscopy also suggested that ultrasonic power treatments could change the secondary structure of gel samples. The scanning electron microscope demonstrated that the network structure of mixed protein gel displayed more regular and uniform after ultrasonic treatments.

Effects of homogenization on the molecular flexibility and emulsifying properties of soy protein isolate

Yeye Xu,Guorong Wang,Xibo Wang,Jie Yu,Jian Wang,Zeyu Zhang,Rui Li 한국식품과학회 2018 Food Science and Biotechnology Vol.27 No.5

The sensitivity of soy protein isolate (SPI) to trypsin was characterized by its flexibility. The effects of different homogenization conditions on soy protein isolate flexibility and emulsifying properties were investigated. Set the homogenization pressure was 120 MPa (megapascal) and the homogenous number of times is 0–4 times, the flexibility increases with the increase of the homogenization times (0–3 times), the change trend of flexibility is not obvious (3–4 times). When the homogenization times was 0–3 times, the emulsifying activity increases, and the emulsifying activity was the strongest at 3 times, after homogenization 3 times, the change trend of emulsifying activity is not obvious, the trend of emulsification stability and emulsification activity were similar. The surface hydrophobicity increases with the increase of homogenization times, while the turbidity decreases. The other structural indicators such as Ultraviolet scanning and endogenous tryptophan fluorescence spectroscopy suggest that the structure of SPI becomes more stretch as the flexibility increases.

Arginine-Rich Manganese Silicate Nanobubbles as a Ferroptosis-Inducing Agent for Tumor-Targeted Theranostics

Wang, Shuaifei,Li, Fangyuan,Qiao, Ruirui,Hu, Xi,Liao, Hongwei,Chen, Lumin,Wu, Jiahe,Wu, Haibin,Zhao, Meng,Liu, Jianan,Chen, Rui,Ma, Xibo,Kim, Dokyoon,Sun, Jihong,Davis, Thomas P.,Chen, Chunying,Tian, American Chemical Society 2018 ACS NANO Vol.12 No.12

<P>Ferroptosis, an iron-based cell-death pathway, has recently attracted great attention owing to its effectiveness in killing cancer cells. Previous investigations focused on the development of iron-based nanomaterials to induce ferroptosis in cancer cells by the up-regulation of reactive oxygen species (ROS) generated by the well-known Fenton reaction. Herein, we report a ferroptosis-inducing agent based on arginine-rich manganese silicate nanobubbles (AMSNs) that possess highly efficient glutathione (GSH) depletion ability and thereby induce ferroptosis by the inactivation of glutathione-dependent peroxidases 4 (GPX4). The AMSNs were synthesized <I>via</I> a one-pot reaction with arginine (Arg) as the surface ligand for tumor homing. Subsequently, a significant tumor suppression effect can be achieved by GSH depletion-induced ferroptosis. Moreover, the degradation of AMSNs during the GSH depletion contributed to <I>T</I><SUB>1</SUB>-weighted magnetic resonance imaging (MRI) enhancement as well as on-demand chemotherapeutic drug release for synergistic cancer therapy. We anticipate that the GSH-depletion-induced ferroptosis strategy by using manganese-based nanomaterials would provide insights in designing nanomedicines for tumor-targeted theranostics.</P> [FIG OMISSION]</BR>

EFFECTS OF ULTRASONIC RADIATION INTENSITY ON THE OXIDATION OF SINGLE-WALLED CARBON NANOTUBES IN A MIXTURE OF SULFURIC AND NITRIC ACIDS

RUI HE,XIBO PEI,LANLAN PAN,LINGYANG TIAN,Feng Luo,LEI SUI,QIANBING WAN,JIAN WANG 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2013 NANO Vol.8 No.4

One of the most commonly used techniques for purification and eventual dispersion of single-wall carbon nanotubes (SWNTs) is oxidation using strong acid and ultrasonication. Literature review reveals that ultrasonication of varying radiation intensities have been used during the acid oxidation, but few have reported whether ultrasonication of different intensities would have different effects on the structure and properties of SWNTs and how the effects are. An investigation of the effects of ultrasonic radiation intensity on SWNTs during oxidation in a mixture of sulfuric and nitric acids was conducted. Ultrasonication using different intensities (50 W, 100 W, 200 W and 300 W) was used. The acid-treated SWNTs were characterized by scanning and transmission electron microscopy, Fourier transform infrared spectroscopy, zeta potential test Boehm titration test and Raman spectrum analysis. Data from these experiments showed that high intensities provided stronger oxidizing conditions than lower ones. As ultrasonic intensity increased, larger number of SWNTs were destroyed and consumed to produce carbonaceous impurities, and more defects appeared in the tube walls.

Constant Output Power Control Methods for Variable-Load Wireless Power Transfer Systems

Xu Liu,Lindsay Clare,Xibo Yuan,Jun Wang,Chonglin Wang,Jianhua Liu 전력전자학회 2018 JOURNAL OF POWER ELECTRONICS Vol.18 No.2

This study proposes a comprehensive mathematical model that includes coil-system circuit and loss models for power converters in wireless power transfer (WPT) systems. The proposed model helps in understanding the performance of WPT systems in terms of coil-to-coil efficiency, overall efficiency, and output power capacity and facilitates system performance optimization. Three methods to achieve constant output power for variable-load systems are presented based on system performance analysis. An optimal method can be selected for a specific WPT system by comparing the efficiencies of the three methods calculated with the proposed model. A two-coil 1 kW WPT system is built to verify the proposed mathematical model and constant output power control methods. Experimental results show that when the load resistance varies between 5 and 25 Ω, the system output power can be maintained at 1 kW with a maximum error of 6.75% and an average error of 4%. Coil-to-coil and overall efficiencies can be maintained at above 90% and 85%, respectively, with the selected optimal control method.

Constant Output Power Control Methods for Variable-Load Wireless Power Transfer Systems

Liu, Xu,Clare, Lindsay,Yuan, Xibo,Wang, Jun,Wang, Chonglin,Li, Jianhua The Korean Institute of Power Electronics 2018 JOURNAL OF POWER ELECTRONICS Vol.18 No.2

This study proposes a comprehensive mathematical model that includes coil-system circuit and loss models for power converters in wireless power transfer (WPT) systems. The proposed model helps in understanding the performance of WPT systems in terms of coil-to-coil efficiency, overall efficiency, and output power capacity and facilitates system performance optimization. Three methods to achieve constant output power for variable-load systems are presented based on system performance analysis. An optimal method can be selected for a specific WPT system by comparing the efficiencies of the three methods calculated with the proposed model. A two-coil 1 kW WPT system is built to verify the proposed mathematical model and constant output power control methods. Experimental results show that when the load resistance varies between 5 and $25{\Omega}$, the system output power can be maintained at 1 kW with a maximum error of 6.75% and an average error of 4%. Coil-to-coil and overall efficiencies can be maintained at above 90% and 85%, respectively, with the selected optimal control method.

Voltage Distortion Suppression for Off-grid Inverters with an Improved Load Current Feedforward Control

Geng, Yiwen,Zhang, Xue,Li, Xiaoqiang,Wang, Kai,Yuan, Xibo The Korean Institute of Power Electronics 2017 JOURNAL OF POWER ELECTRONICS Vol.17 No.3

The output voltage of an off-grid inverter is influenced by load current, and the voltage harmonics especially the 5th and 7th are increased with nonlinear loads. In this paper, to attenuate the output voltage harmonics of off-grid inverters with nonlinear loads nearby, a load current feedforward is proposed. It is introduced to a voltage control loop based on the Positive and Negative Sequence Harmonic Regulator (PNSHR) compensation to modify the output impedance at selective frequencies. The parameters of the PNSHR are revised with the output impedance of the off-grid inverter, which minimizes the output impedance of the off-grid inverter. Experimental results verify the proposed method, showing that the output voltage harmonics caused by nonlinear loads can be effectively suppressed.

Voltage Distortion Suppression for Off-grid Inverters with an Improved Load Current Feedforward Control

Yi-Wen Geng,Xue Zhang,Xiaoqiang Li,Kai Wang,Xibo Yuan 전력전자학회 2017 JOURNAL OF POWER ELECTRONICS Vol.17 No.3

The output voltage of an off-grid inverter is influenced by load current, and the voltage harmonics especially the 5th and 7th are increased with nonlinear loads. In this paper, to attenuate the output voltage harmonics of off-grid inverters with nonlinear loads nearby, a load current feedforward is proposed. It is introduced to a voltage control loop based on the Positive and Negative Sequence Harmonic Regulator (PNSHR) compensation to modify the output impedance at selective frequencies. The parameters of the PNSHR are revised with the output impedance of the off-grid inverter, which minimizes the output impedance of the off-grid inverter. Experimental results verify the proposed method, showing that the output voltage harmonics caused by nonlinear loads can be effectively suppressed.