http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Improved DCT-Based Image Coding and Decoding Methods For Low-Bit Rate Applications
Jung, Sung-Hwan,Sanjit K. Mitra 國立 昌原大學校 基礎科學硏究所 1994 基礎科學硏究所論文集 Vol.6 No.-
The discrete cosine transform (DCT) is well known for highly efficient coding performance, and it is widely used in many image compression applications. However, in low-bit rate coding, it produces undesirable block artifacts that are visually not pleasing. In addition, in many applications, faster computation and easier VLSI implementation of DCT coefficients are also important issues. The removal of the block artifacts and faster DCT computation are therefore of practical interest. In this paper, we outline a modified DCT computation scheme that provides a simple efficient solution to the reduction of the block artifacts while achieving faster computation. We also derive a similar solution for the efficient computation of the inverse DCT. We have applied the new approach for the low-bit rate coding and decoding of images. Initial simulation results on real images have verified the improved performance obtained using the proposed method over the standard JPEG method.
The prediction of the tooth size in the mixed dentition for Korean
Moon, Sung-Hwan,Kim, Seong-Oh,Yu, Hyung-Seong,Choi, Byung-Jai,Choi, Hyung-Jun,Lee, Jae-Ho 大韓小兒齒科學會 2006 大韓小兒齒科學會誌 Vol.33 No.2
이번 연구의 목적은 혼합치열기 아동에서 미맹출된 견치와 소구치의 크기를 예측하는데 있어서 한국인에 맞는 방정식을 만들기 위함이다. 미맹출 치아의 크기를 예측하는 것은 혼합치열기 교정 진단과 치료계획 수립에 있어서 매우 중요하다. 미맹출된 견치와 소구치 크기를 예측하는 방법은 몇가지가 있지만 그중에서도 가장 흔하게 쓰이는 것이 모이어의 예측표와 다나카와 존스턴의 방정식이 있다. 하지만 그것들은 백인을 위해서 제작된 것이고 치아 크기는 인종에 따라서 다르다고 알려져 있다. 이번 연구에서는 치아크기를 측정하여 하악 영구 절치의 크기 합과 견치 및 소구치의 크기 합 사이의 상관관계를 구하고 회귀방정식을 이용해서 한국인에 맞는 예측표를 만들었다. 연세대학교 치과대학에 재학중인 178명의 한국 학생(남 108명, 여 70명, 평균연령 21.63)을 대상으로 실험하였다. 영구치의 근원심 폭경을 석고모형상에서 calipers를 이용해서 측정하였다. 성별간의 치아 크기는 차이가 있었다(p<0.05). Correlation coefficient는 0.57에서 0.64의 범위였고, standard errors of the estimates 는 여성에서 0.6으로써 남성보다 우수하였다. r^(2)값은 0.27에서 0.41의 범위를 나타내었다. Estimating the size of unerupted teeth is an essential aspect of orthodontic diagnosis and treatment planning in the mixed dentition. Several methods were introduced and used for the prediction. The most common methods among these would be Moyers probability chart and Tanaka and Johnston equations. These are currently used widely, but they were developed for Caucasians. Because there are clear racial differences in teeth size, the objectives of this study were to produce correlation coefficients between the combined mesiodistal widths of the permanent mandibular incisors and those of the canines and premolars for each quadrant, and prediction tables with regression equations, specifically for Korean. 178 young adults (70 women, 108 men, mean age 21.63 years) were selected from the College of Dentistry, Yonsei University, Seoul, Korea. The mesiodistal crown diameters of the permanent teeth were measured with calipers. Significant sexual dimorphism was found in tooth sizes. The correlation coefficients between the total mesiodistal width of the mandibular permanent incisors and those of the maxillary and mandibular canines and premolars were found to be between 0.52 and 0.64. The standard error of the estimatation was better (0.60) for women and the r^(2) values ranged from 0.27 to 0.41 for both sexes, Prediction tables were prepared for Korean. This study showed larger canine and premolar diameters than Tanaka and Johnston's and Moyers' studies which might be due to the racial differences. Further investigations with a larger sample size will be needed for more representative data on the Korean population.
成煥泰,吳澤烈,吳煥燮 慶熙大學校 1980 論文集 Vol.10 No.-
In this study, the optimum mathematical models were made in order to derive Optimum Machining speed which is due to be established in the production of each manufactures as an important parameter based upon the cutting speed, in case of making manufactures of multi-kinds into unit-production processing. The economical optimum cutting speed has been set up by using the above phenomenon as a proper system, and the results from the comparative analysis between the above model & the actual cutting work data, are summarized as follows. (1) The mathematical models for the optimum machining speed are derived into the expressions (23), (24), (25), (26), (27), (28), (29). (2) The basic expressions of the optimum machining speed are derived into (32), (34), (36), (37), (39), (40), (41), (44), for the purpose of each estimation of the maximum efficiency standard, the minimum cost standard and the maximum profits rate standard. (3) The example of setting up the optimum cutting speed of multi-kinds manufacturing production was formulated, and the experimental theoretical values were known to be in the same range as a result of the comparative study between the cutting speed obtained by the cutting test & the optimum cutting speed calculated by the theoretical expressions.
成昌煥,徐祥烈 영남이공대학 1997 論文集 Vol.26 No.-
The results obtained from undrained torsional shear test for saturated sand lead to the following conclusions. 1. In the case of monotonic undrained torsional shear test, the more loose sand has, the more maximum excessive pore water pressure happens on a large scale. At that time, large shear strain happens. Also, in the case of one directional monotonic load, there is some possibility for a liquefaction to happen. 2. In undrained cyclic torsional shear test, if strain begins to generate, a loose sand comes to the liquefaction. In a dense sand, the behaviour of a rapid increase of strain is not shown. 3. According to the result compared constant volume test and undrained test, a difference of increased amount of pore water pressure by unloaded process in both tests is a little large. If the liquefaction strength is judged from increase of pore water pressure, loading number in the former is decreased by about 40%.