http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Kook Jin Chung(정국진),Sung Ook Jung(정성욱),Hoi Soo Yoon(윤회수) 대한정형외과학회 2007 대한정형외과학회지 Vol.42 No.6
목적: 골다공증성 척추 압박 골절에서 일측 도달법을 이용한 풍선척추성형술의 임상 결과를 평가해보고자 한다. 재료 및 방법: 척추 골다공증성 압박 골절로 진단되었으며 보존적 치료에 반응을 보이지 않았던 20명, 23예를 대상으로 하였다. 이들은 수상일에서 수술시점까지 2주에서 2개월간 경과하였던 자들로 대부분이 여성 환자(여자 19명, 남자 2명)이였으며 평균연령은 71.7세였다. 최소 추시기간은 12개월(평균 18.3개월)이였다. 전례에서 일측도달법을 이용한 풍선척추 성형술을 시행하였으며 골절된 척추체의 회복 및 추체 정복의 소설을 측정하기 위해서 술전 및 수술 직후, 최종 추시 시 전후면 및 측면 방사선 촬영을 시행하였다. 또한 통증의 정도를 측정하기 위해 Visual anlaogue scale을 측정하였다. 결과: 각각의 부위에서 술전 척추체 높이는 57.8%, 66.1%, 85.3%였으며 수술 직후 76.2%, 78.6%, 87.3%, 최종 추시 시 74.4%, 78.6%, 87.3%로 측정되었고 국소분절 후만각은 17.6도, 수술 직후 8.9도, 최종 추시 시 9.1도로 측정되었다. visual analogue scale은 술전 8.5에서 수술 직후 2.5, 최종 추시 시 2,7로 유지되었다. 수술직후와 최종 추시를 비교한 통계 결과에서 전방, 중앙 및 후방 척추체의 높이(p<0.001)와 후만각(p=0.03)은 의미있는 감소를 보였으나 visual analogue scale (p=0.056)은 변화를 보이지 않았다. 3예에서 골시멘트의 유출이 있었으나 신경학적 합병증은 유발하지 않았다. 결론: 일측 도달법을 이용한 풍선척추성형술은 양측성 도달법을 대체할 수 있는 골다공증성 척추압박골절의 좋은 치료법으로 생각된다. Purpose: To evaluate the clinical results of a unilateral balloon kyphoplasty for the treatment of osteoporotic vertebral compression fractures (VCFs). Materials and Methods: Twenty patients, 23 cases of osteoporotic VCFs who failed to respond to nonoperative treatments and who were confirmed by a consultant radiologist, were enrolled in this study. Times between injury and operation varied from 2 weeks to 2 months. All patients except two (18 female, 2 male patients), were female, and mean patient age was 71.7 (58-82) years. Follow-ups were conducted at least 12 months (12-27, mean 18.3). All patients underwent unilateral balloon kyphoplasty. Roentgenographic assessments were perform to evaluate fractured vertebra restoration and reduction loss. A ten-point visual analogue scale was used to measure pre- and postoperative pain severity. Results: Preoperative anterior, middle and posterior heights of vertebra bodies were 57.8%, 66.1 % and 85.3% of normal at presentation and these increased to 76.2%, 80.1%, 88.7% respectively at immediately after operation and at last follow-up, heights of each portion were 74.4%, 78.6%, 87.3%. Mean preoperative kyphotic angles of 17.6° at presentation improved to 8.9° at immediately after operations and to 9.1° at last follow-ups. Loss of reduction was 1.8%, 1.5%, 1.4% and 0.2°. Mean pain scores were 8.5 before surgery, 2.5 immediately after operations and 2.7 at last follow-ups. Statistical analysis showed a significant decrease in kyphotic angle (p=0.03) but VAS scores were no different (p=0.056). Anterior, middle and posterior body height was decreased with a statistical significance between two period (p<0.001). PMMA leakage occurred in 3 cases, but they did not cause neurologic deficits. Consiusion: Balloon kyphoplasty using a unilateral approach is a good treatment method for osteoporotic vertebral compression fractures and an alternative to the substitute bilateral approach.
NTV 영역에서의 delay model과 parametric variation
김광수(Kwangsu Kim),한상우(Sangwoo Han),박영민(Young Min Park),임민영(Minyoung Im),정성욱(Sung-Ook Jung),정의영(Eui-Young Chung) 대한전자공학회 2015 대한전자공학회 학술대회 Vol.2015 No.11
NTV(Near-Threshold Voltage) region is distinguished by large delay values and variability of gate cells. In order to validate commercially available cell characterization methodologies, we perform an extensive evaluations on NLDM delay models of inverter cell on NTV regions and compare the effect of parametric variations over gate delay on NTV and nominal voltage regions, disclosing a need for NTV-aware variation modeling methodologies.