http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
금속 알콕사이드를 원료로하여 분무 건조법에 의해 제조된 코오디어라이트 세라믹의 전기적 특성
박희찬,류봉기,류수착 釜山大學校生産技術硏究所 1995 生産技術硏究所論文集 Vol.49 No.-
코오디어라이트 세라믹 원료 분말이 금속 알콕사이드를 원료로 하여 제조되었다. 가수분해에 의해 제조된 졸을 분무 건조법과 오븐 건조기 건조법으로 건조하였으며 800℃에서 하소 처리한 후 1300℃에서 코오디어라이트 세라믹 소결체를 제조하였다. 분무 건조분말의 소결체의 유전상수 및 유전손실은 1㎒에서 1.1과 0.035의 값을 나타내었고, 건조기 건조분말의 소결체는 1.6 및 0.08의 값을 나타내었다. 분무건조 분말의 소결체의 겉보기 기공율 및 부피비중은 평균 1.3%와 2.448g/㎤ 이였고, 건조기 건조 분말의 소결체의 겉보기 기공율과 부피비중은 평균 3.2%와 2.185g/㎤이였다. Cordierite ceramic precursor powders were prepared from metal alkoxides. Hydrolyzed also were dried by spray dryer and oven dryer, and then they were calcined at 800℃. Calcined cordierite powders were sintered at 1300℃. In the codierite ceramics that were prepared from spray drying powders, dielectric constant and loss factor have 1.1 and 0.035 in 1MHz, respectively. In the codierite ceramics that were prepared from oven drying powders, dielectric constant and loss factor have 1.6 and 0.08 in 1MHz, respectively, Spray dried and sintered cordierite ceramics have apparent porosity of 1.3% and bulk density of 2.448g/㎤. Oven dried and sintered cordierite ceramics have apparent porosity of 3.2% and bulk density of 2.185g/㎤.
류봉기,박희찬,박성수 釜山大學校生産技術硏究所 1996 生産技術硏究所論文集 Vol.51 No.-
핵연료의 재처리공정중에서 방출되는 high-level방사성폐액을 안정한 글라스형태로 고화하여 처리하는 글라스고화법이 사용되고 있다. 본 연구에서는 고화글라스구성성분의 하나인 Pb가 글라스의 용해도, 글라스중에서의 존재형태, 결정화에 미치는 영향을 UV, XRD, TG등을 이용하여 검토하였다. Pd의 용해도는 Tg∼1200℃에서 수 십-수 백ppm정도이며, 용해도를 전후하여 각각 2가이온 및 콜로이드상태로 존재한다는 것을 확인하였다. 그리고 Pb는 결정화에있어서 결정화를 촉진하였으나, Mn, Cr, V, Sb등의 다원자가원소의 첨가에 의하여 결정화를 억제할 수 있었다. Glass is an attractive form for the permanent and secure disposal treatment of high-level radioactive liquid wastes from high-level nuclear waste re-management process. In present work, we investigated the effect of glass solubility, existing form from of Pd in glass, and crystallization of glass on the Pd behaviour in the waste glass using UV, XRD, and TG. The solubility of Pd was from several 10s to several 100s ppm in Tg∼1200℃, and we found Pd exists as bivalent ionic or colloidal form at around the value of Pd-solubility in glass matrix. In crystallization, Pd in glass was helpful for promoting the crystallization, but Mn, Cr, V, and Sb additives retarded and controlled the crystallization.
CONSTRUCTION OF AN E-CALLISTO STATION IN KOREA
Bong, Su-Chan,Kim, Yeon-Han,Roh, Hee-Seon,Cho, Kyung-Suk,Park, Young-Deuk,Choi, Seong-Hwan,Baek, Ji-Hye,Monstein, Christian,Benz, Arnold O.,Moon, Yong-Jae,Kim, Sung-Soo S. The Korean Astronomical Society 2009 Journal of The Korean Astronomical Society Vol.42 No.1
The e-CALLISTO is a global network of frequency-agile solar radio spectrometers that was constructed in a collaboration between Swiss Federal Institute of Technology Zurich (ETH Zurich) and local host institutes. It is intended to monitor solar radio bursts 24 hours a day in frequency range between 45 MHz and 870 MHz. One of e-CALLISTO spectrometer was installed at Korea Astronomy and Space Science Institute (KASI) in 2007 October. The spectrometer gets signals from a horizontally polarized log-periodic antenna mounted on an automatic Sun-tracking system. Tracking status and data are monitored in Space Weather Monitoring Laboratory (SWML) of KASI in real time, and flare time data are transferred to ETH Zurich data archive daily. Using this spectrometer we obtained a couple of type II solar radio bursts on 2007 December 31, and found that these bursts are associated with a CME which occurred on the east limb.
A STEADY FLOW MODEL OF A MAGNETIC FLUX TUBE CONSTRAINED TO OBSERVED DIFFERENTIAL EMISSION MEASURE
BONG SU-CHAN,CHAE JONGCHUL,YUN HONG SIK The Korean Astronomical Society 2000 Journal of The Korean Astronomical Society Vol.33 No.3
We have investigated one dimensional steady flow model of a typical magnetic flux tube in the solar transition region constrained to observed Differential Emission Measure (DEM) for the average quiet-Sun deduced by Raymond & Doyle (1981) with a flux tube geometry conforming to Doppler shifts of UV lines measured by Chae, Yun & Poland (1998). Because local heating and filling factor in the transition region are not well known, we considered two extreme cases, one characterized by the filling factor= 1 ('filled-up model') and the other set by local heating=0 ('not-heated model'). We examined how much the heating is required for the flux tube by recomputing a model through adjustment of the filling factor in such a way that 'not-heated model' accounts for the observed DEM.