http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Shunzhi Qiao (검색결과 2 건)
- 무료
- 기관 내 무료
- 유료
-
Zhongning Guo,Shunzhi Qiao,Liangliang Wang,Kai Zhang,Yingjie Xiao,Zhixiang Zou 대한기계학회 2022 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.36 No.11
The electrochemical discharge machining (ECDM) is an advanced machining technology used to fabricate micro-holes in glass. In this study, a sheet tool electrode is employed to increase electrolyte circulation in machining zone. The effect of pulse voltage, frequency, duty cycle, electrolyte concentration, and tool rotation speed on the geometric properties of micro-holes were evaluated. The results showed that when using a sheet tool electrode, the machining depth increased by 42.9 %, and the machining efficiency increased by 51.1 %, while the entrance diameter was reduced by 13.9 % than cylindrical tool electrode. Additionally, the heat-affected zone (HAZ) and entrance hole surface quality is improved. On the other hand, the Taguchi method was employed to analyze the relative importance of the machining parameters on geometric characteristics of micro-holes (i.e. drilled depth and entrance diameter of micro-holes). Finally, the entrance hole overcut of 148 μm was successfully fabricated with a depth of 2520 μm. It was discovered that using a sheet tool electrode is a simple method for machining a deep micro-hole with high machining efficiency and a range entrance hole diameter overcut that is acceptable.
-
Ting Huang,Zhongning Guo,Guiming Liang,Shunzhi Qiao,Pengcheng Cai,Zhixiang Zou 대한기계학회 2023 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.37 No.8
The mask jet electrochemical deposition was used to deposit the large-scale micro cylinders array in this study. The effect of the pulse peak current density, pulse frequency, pulse duty cycle, injection pressure and scanning speed on the deposition characteristics (i.e. deposition height, surface roughness and surface quality of micro cylinders) have been investigated. The experiment results showed that the mean height and the surface roughness of micro cylinders increased form the peak current density. Moreover, due to a high pulse frequency provided a shorter pulse on-time, and significantly facilitating the renewal of the ion concentration in the electroforming fluid. A higher pulse frequency and larger duty cycle provide a better deposition characteristic. The injection pressure was found to have a significant effect on the height, the surface roughness and surface appearance of micro cylinders. Furthermore, when using higher scanning speed, the crystalline particles of the cast layer decrease, significantly decreasing the surface roughness. Based on discussed, the pulse current density of 12 A/dm 2 , a pulse frequency of 3000 Hz, a pulse duty cycle of 30 %, a jet inlet pressure of 80 kPa, a scanning speed of 8 mm/s and a number of scans of 100 is optimal parameters. Finally, by using these parameters, a large-area micro cylindrical array structures with a height of 22.53±2.46 μm and diameter of 205±3.21 μm were successfully fabricated. It can be concluded that the mask jet electrochemical deposition is a simple method to realize the electrodeposition of large-area array structures.
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
