A study on detailing gusset plate and bracing members in concentrically braced frame structures

Hassan, M.S.,Salawdeh, S.,Hunt, A.,Broderick, B.M.,Goggins, J. Techno-Press 2018 Advances in computational design Vol.3 No.3

Conventional seismic design of concentrically braced frame (CBF) structures suggests that the gusset plate connecting a steel brace to beams and/or columns should be designed as non-dissipative in earthquakes, while the steel brace members should be designed as dissipative elements. These design intentions lead to thicker and larger gusset plates in design on one hand and a potentially under-rated contribution of gusset plates in design, on the other hand. In contrast, research has shown that compact and thinner gusset plates designed in accordance with the elliptical clearance method rather than the conventional standard linear clearance method can enhance system ductility and energy dissipation capacity in concentrically braced steel frames. In order to assess the two design methods, six cyclic push-over tests on full scale models of concentric braced steel frame structures were conducted. Furthermore, a 3D finite element (FE) shell model, incorporating state-of-the-art tools and techniques in numerical simulation, was developed that successfully replicates the response of gusset plate and bracing members under fully reversed cyclic axial loading. Direct measurements from strain gauges applied to the physical models were used primarily to validate FE models, while comparisons of hysteresis load-displacement loops from physical and numerical models were used to highlight the overall performance of the FE models. The study shows the two design methods attain structural response as per the design intentions; however, the elliptical clearance method has a superiority over the standard linear method as a fact of improving detailing of the gusset plates, enhancing resisting capacity and improving deformability of a CBF structure. Considerations were proposed for improvement of guidelines for detailing gusset plates and bracing members in CBF structures.

The bias of lag window estimators of the fractional difference paramete

R. L. Hunt,M. S. Peiris 한국전산응용수학회 2003 Journal of applied mathematics & informatics Vol.12 No.1-2

Numerical simulation of masonry shear panels with distinct element approach

Zhuge, Y.,Hunt, S. Techno-Press 2003 Structural Engineering and Mechanics, An Int'l Jou Vol.15 No.4

Masonry is not a simple material, the influence of mortar joints as a plane of weakness is a significant feature and this makes the numerical modelling of masonry very difficult especially when dynamic (seismic) analysis is involved. In order to develop a simple numerical model for masonry under earthquake load, an analytical model based on Distinct Element Method (DEM) is being developed. At the first stage, the model is applied to simulate the in-plane shear behaviour of an unreinforced masonry wall with and without opening where the testing results are available for comparison. In DEM, a solid is represented as an assembly of discrete blocks. Joints are modelled as interface between distinct bodies. It is a dynamic process and specially designed to model the behaviour of discontinuities. The numerical solutions obtained from the distinct element analysis are validated by comparing the results with those obtained from existing experiments and finite element modelling.

Bus headway optimization with consumer surplus as a measure of societal benefit

Jason Hawkins,S. C. Wirasinghe,J. D. Hunt 서울시립대학교 도시과학연구원 2021 도시과학국제저널 Vol.25 No.1

This paper derives the square root bus dispatch optimization developed by Newell from consumer surplus rather than the original cost minimization function. We then extend the model to consider dispatch-variant demand and outline its property relative to the original model by Newell. Demand elasticity is introduced via a multinomial logit mode choice model. Results are tested for City of Edmonton mode choice and ridership. The sensitivity of the function to wait time cost and passenger demand is tested. For the observed passenger demand and value of travel time, our analysis suggests there is a portion of riders who are captive and will suffer increasing wait time costs, but many passengers will make the choice to utilize other modes of travel when faced with increasing bus headways.

Valorization of lignocellulosic fibres of paper waste into levulinic acid using solid and aqueous Brønsted acid

Chen, Season S.,Wang, Lei,Yu, Iris K.M.,Tsang, Daniel C.W.,Hunt, Andrew J.,Jé,rô,me, Franç,ois,Zhang, Shicheng,Ok, Yong Sik,Poon, Chi Sun Elsevier 2018 Bioresource technology Vol.247 No.-

<P><B>Abstract</B></P> <P>This study aims to produce levulinic acid (LA) from paper towel waste in environment-friendly and economically feasible conditions, and evaluate the difference using solid and aqueous Brønsted acids. Direct dehydration of glucose to LA required sufficiently strong Brønsted acidity, where Amberlyst 36 demonstrated rapid production of approximately 30Cmol% of LA in 20min. However, the maximum yield of LA was limited by mass transfer. In contrast, the yield of LA gradually increased to over 40Cmol% in 1M H<SUB>2</SUB>SO<SUB>4</SUB> at 150°C in 60min. The SEM images revealed the conversion in dilute acids under microwave at 150°C resulting in swelling structures of cellulose, which were similar to the pre-treatment process with concentrated acids. Further increase in reaction temperature to 200°C significantly shortened the reaction time from 60 to 2.5min, which saved the energy cost as revealed in preliminary cost analysis.</P> <P><B>Highlights</B></P> <P> <UL> <LI> 30% of levulinic acid (LA) yielded from paper towel over Amberlyst 36 in 20min. </LI> <LI> Maximum yield of LA was comparable using dilute sulphuric acid at 150 and 200°C. </LI> <LI> Cellulose underwent swelling in dilute acid with microwave heating at 150°C. </LI> <LI> Conversion at 200°C shortened reaction time and reduced total energy consumption. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Numerical simulation of masonry shear panels with distinct element approach

Y.Zhuge,S.Hunt 국제구조공학회 2003 Structural Engineering and Mechanics, An Int'l Jou Vol.15 No.4

Metmyoglobin Reduction Through Lactate-NAD-LDH System In Vivo and Vitro

Kim. Yoon-Hwan,Hunt. M.C.,Mancini. R.A.,Kropf. D.H.,Smith. J.S. 한국축산식품학회 2006 심포지움 및 학술발표회 Vol.- No.37

Wastewater Utilization: A Place for Managed Wetlands - Review -

Humenik, F.J.,Szogi, A.A.,Hunt, P.G.,Broome, S.,Rice, M. Asian Australasian Association of Animal Productio 1999 Animal Bioscience Vol.12 No.4

Constructed wetlands are being used for the removal of nutrients from livestock wastewater. However, natural vegetation typically used in constructed wetlands does not have marketable value. As an alternative, agronomic plants grown under flooded or saturated soil conditions that promote denitrification can be used. Studies on constructed wetlands for swine wastewater were conducted in wetland cells that contained either natural wetland plants or a combination of soybeans and rice for two years with the objective of maximum nitrogen reduction to minimize the amount of land required for terminal treatment. Three systems, of two 3.6 by 33.5 m wetland cells connected in series were used; two systems each contained a different combination of emergent wetland vegetation: rush/bulrush (system 1) and bur-reed/cattail (system 2). The third system contained soybean (Glycine max) in saturated-soil-culture (SSC) in the first cell, and flooded rice (Oryza sativa) in the second cell. Nitrogen (N) loading rates of 3 and $10kg\;ha^{-1}\;day^{-1}$ were used in the first and second years, respectively. These loading rates were obtained by mixing swine lagoon liquid with fresh water before it was applied to the wetland. The nutrient removal efficiency was similar in the rush/bulrush, bur-reed/cattails and agronomic plant systems. Mean mass removal of N was 94 % at the loading rate of $3kg\;N\;ha^{-1}\;day^{-1}$ and decreased to 71% at the higher rate of $10kg\;N\;ha^{-1}\;day^{-1}$. The two years means for above-ground dry matter production for rush/bulrushes and bur-reed/cattails was l2 and $33Mg\;ha^{-1}$, respectively. Flooded rice yield was $4.5Mg\;ha^{-1}$ and soybean grown in saturation culture yielded $2.8Mg\;ha^{-1}$. Additionally, the performance of seven soybean cultivars using SSC in constructed wetlands with swine wastewater as the water source was evaluated for two years, The cultivar Young had the highest yield with 4.0 and $2.8Mg\;ha^{-1}$ in each year, This indicated that production of acceptable soybean yields in constructed wetlands seems feasible with SSC using swine lagoon liquid. Two microcosms studies were established to further investigate the management of constructed wetlands. In the first microcosm experiment, the effects of swine lagoon liquid on the growth of wetland plants at half (about 175 mg/l ammonia) and full strength (about 350 mg/l ammonia) was investigated. It was concluded that wetland plants can grow well in at least half strength lagoon liquid. In the second microcosm experiment, sequencing nitrification-wetland treatments was studied. When nitrified lagoon liquid was added in batch applications ($48kg\;N\;ha^{-1}\;day^{-1}$) to wetland microcosms the nitrogen removal rate was four to five times higher than when non-nitrified lagoon liquid was added. Wetland microcosms with plants were more effective than those with bare soil. These results suggest that vegetated wetlands with nitrification pretreatment are viable treatment systems for removal of large quantities of nitrogen from swine lagoon liquid.

Polar aprotic solvent-water mixture as the medium for catalytic production of hydroxymethylfurfural (HMF) from bread waste

Yu, Iris K.M.,Tsang, Daniel C.W.,Chen, Season S.,Wang, Lei,Hunt, Andrew J.,Sherwood, James,De Oliveira Vigier, Karine,Jé,rô,me, Franç,ois,Ok, Yong Sik,Poon, Chi Sun Elsevier 2017 Bioresource technology Vol.245 No.1

<P><B>Abstract</B></P> <P>Valorisation of bread waste for hydroxymethylfurfural (HMF) synthesis was examined in dimethyl sulfoxide (DMSO)-, tetrahydrofuran (THF)-, acetonitrile (ACN)-, and acetone-water (1:1v/v), under heating at 140°C with SnCl<SUB>4</SUB> as the catalyst. The overall rate of the process was the fastest in ACN/H<SUB>2</SUB>O and acetone/H<SUB>2</SUB>O, followed by DMSO/H<SUB>2</SUB>O and THF/H<SUB>2</SUB>O due to the rate-limiting glucose isomerisation. However, the formation of levulinic acid (via rehydration) and humins (via polymerisation) was more significant in ACN/H<SUB>2</SUB>O and acetone/H<SUB>2</SUB>O. The constant HMF maxima (26–27mol%) in ACN/H<SUB>2</SUB>O, acetone/H<SUB>2</SUB>O, and DMSO/H<SUB>2</SUB>O indicated that the rates of desirable reactions (starch hydrolysis, glucose isomerisation, and fructose dehydration) relative to undesirable pathways (HMF rehydration and polymerisation) were comparable among these mediums. They also demonstrated higher selectivity towards HMF production over the side reactions than THF/H<SUB>2</SUB>O. This study differentiated the effects of polar aprotic solvent-water mediums on simultaneous pathways during biomass conversion.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Bread waste was valorised for the synthesis of HMF, with yields of 26–27mol%. </LI> <LI> Fastest HMF production took place in ACN/H<SUB>2</SUB>O and acetonitrile/H<SUB>2</SUB>O systems. </LI> <LI> Slow glucose isomerization hindered HMF formation in DMSO/H<SUB>2</SUB>O and THF/H<SUB>2</SUB>O. </LI> <LI> Similar HMF selectivity was achieved in ACN/H<SUB>2</SUB>O, acetonitrile/H<SUB>2</SUB>O, and DMSO/H<SUB>2</SUB>O. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Odorous VOC emission following land application of swine manure slurry

Parker, D.B.,Gilley, J.,Woodbury, B.,Kim, K.H.,Galvin, G.,Bartelt-Hunt, S.L.,Li, X.,Snow, D.D. Pergamon Press ; Elsevier [distribution] 2013 Atmospheric environment Vol.66 No.-

Swine manure is often applied to crop land as a fertilizer source. Odor emissions from land-applied swine manure may pose a nuisance to downwind populations if manure is not applied with sufficient forethought. A research project was conducted to assess the time decay of odorous volatile organic compound (VOC) emissions following land application of swine manure. Three land application methods were compared: surface application, incorporation 24 h after surface application, and injection. Emission rates were measured in field plots using a small wind tunnel and sorbent tubes. VOCs including eight volatile fatty acids, five aromatics, and two sulfur-containing compounds were quantified by gas chromatography-mass spectrometry. In most cases, a first order exponential decay model adequately described the flux versus time relationship for the 24 h period following land application, but the model sometimes overestimated flux in the 6-24 h range. The same model but with the time term squared adequately predicted flux over the entire 24 h period. Three compounds (4-methylphenol, skatole, and 4-ethylphenol) accounted for 93 percent of the summed odor activity value. First order decay constants (k) for these three compounds ranged from 0.157 to 0.996 h<SUP>-1</SUP>. When compared to surface application, injection of swine manure resulted in 80-95 percent lower flux for the most odorous aromatic compounds. These results show that VOC flux decreases rapidly following land application of swine manure, declining below levels of detection and near background levels after 4 to 8 h.