Stratigraphic classification of the Quaternary North Hebei Plain using geophysical methods

Peng Dai,Kongyou Wu,Shengdong Wang,Sicong Zheng,Tianshe Cheng,Xiaohong Deng 한국지질과학협의회 2024 Geosciences Journal Vol.28 No.2

The North Hebei Plain is a typical example of a deep-covered area, with a thickness of more than 200 m Quaternary loose sediments. Previous studies have tried various stratigraphic classification methods but lack an effective combination of geophysical methods. Based on the analysis of rock strata and dating tests, combined with geophysical well-logging data, shallow seismic reflection, and paleomagnetic dating, the Quaternary strata of the deep-covered area in the Hebei Plain was divided into the Lower Pleistocene series, the Middle Pleistocene series, the Upper Pleistocene series, and the Holocene series. By observing the cores of the Quaternary borehole QHJ02, this paper focused on dividing its loose sediments into eight lithological sections, according to the lithology, sediment colour, sedimentary assemblage, and sedimentary environment. The geomagnetic polarity belt is divided according to the paleomagnetic inclination of the paleomagnetic sample in borehole QHJ02. The results of the paleomagnetic test show that the interval of 0–101.3 m is Brunhes normal polarity chron, the interval from 101.3 to 219.5 m is Matuyama reversed polarity chron, and the interval from 219.5 to 350 m is Gauss normal polarity chron. The amplitude of the geophysical logging curve shows a good correspondence with the lithology of the QHJ02 borehole. The lithology changes can be identified through the abrupt abnormal positions of logging curves such as gamma ray, resistivity, and magnetization to analyze the sedimentary environment combination and determine the formation boundary. According to the combination of paleomagnetic, shallow seismic reflection, and geophysical well logging methods, we can determine the bottom boundaries of the Quaternary and middle Pleistocene are 219.5 m and 101.3 m, respectively. According to the combination of geophysical well-logging, lithostratigraphic assessment, dating experiment of Accelerator Mass Spectrometry 14C (AMS 14C), and Optically Stimulated Luminescence (OSL), we can determine the bottom of the upper Pleistocene and the lower limit of Holocene to be at 45.4 m and 21.4 m, respectively. Based on a comprehensive analysis of rock stratigraphic characteristics and well-logging curves, this study investigated the paleoenvironmental characteristics of borehole QHJ02 at different ages. The Upper Neogene was characterized by branch channels and river floodplains, with localized occurrences of alluvial fans, avulsion fans, and inter-channel lowlands. During the Early Pleistocene, branch channels and inter-channel lowlands dominated, with localized river floodplains. The Middle Pleistocene witnessed alternating branch channels and river floodplains as the main paleoenvironments. In the Late Pleistocene, branch channels and inter-channel lowlands were prevalent. The Holocene saw a combination of natural levees and river floodplain environments. These findings enhance our understanding of the geological evolution and paleoenvironmental changes in the North Hebei Plain.

Preparation and characterization of boron films used for boron-lined gaseous neutron detectors

Deng Chao,Wang Qibiao,Wu Yadong,Peng Shuming,Liu Fule,Li Huailiang,Cheng Jianfeng,Tuo Xianguo 한국물리학회 2021 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.79 No.7

Boron-lined gaseous neutron detectors are being widely used in neutron detection to replace 3He proportional counters, and the boron film’s parameters comprise the key factors influencing the performance of such detectors. However, the method of characterizing boron film is relatively simple at present. In this study, boron films stuck to ultrathin glass substrate with different mass proportions of epoxy to natural boron (MPENBs) were prepared. A variety of characterization methods, including scanning electron microscopy, energy-dispersive X-ray spectroscopy, white-light interferometry, and multiple tape tests, were used to test the boron films simultaneously, and the test results are discussed herein. Moreover, neutron imaging was conducted to analyze the uniformity of boron-10 atoms. These characterization results demonstrate that the optimized MPENB formulation is 0.16 with the boron atomic ratio of chemical elements (ARCE) at approximately 68.8% and surface roughness Sa = 1.457 μm and that the structure of boron film is uniform and fluffy, contributing to improving the boron-lined method.

Transcriptome sequencing provides insights into the metabolic pathways of patchouli alcohol and pogostone in Pogostemon cablin (Blanco) Benth

Cheng Peng,Yang He,Cao Deng,Liang Xiong,Shishang Qin 한국유전학회 2016 Genes & Genomics Vol.38 No.11

Pogostemon cablin (Blanco) Benth. is an important medicinal plant; however, its molecular biology remains largely unexplored. Here, we report the results of whole transcriptome-wide analyses of P. cablin using nextgeneration sequencing technology. In the present study, we generated 108,996 unigenes using RNA sequencing data. Among these unigenes, 65,536 were annotated in the NR database. There were 40,670 intact open reading frames (ORFs), which accounted for 69 % of the 58,820 predicted ORFs, demonstrating that our assembled transcriptome was of high quality. Gene expression levels in the leaf and stem were quantified, and 18,481 unigenes (17 %) were determined to be significantly differentially expressed. The patchouli alcohol (PA) and pogostone (PO) metabolic pathway of P. cablin was also reconstructed, and among the 17 putative homologs to PA and PO biosynthesis-related genes, seven were significantly upregulated in the stems, and three genes were significantly upregulated in the leaves. The correlation between the essential oil contents of P. cablin and the potentially pivotal genes for PA and PO production were identified. Considering that the contents of PA and PO in leaves and stems are markedly different in the same plant and we did not detect any pattern in the expression levels of candidate genes between leaves and stems, we speculate that after the biosynthesis, more PA probably accumulates in the leaves, and more PO in the stems of P. cablin. The transcriptome of P. cabin will facilitate further researches on the molecular system biology of the Pogostemon genus, as well as the in-depth studyies of PA and PO biosynthesis and its potential applications for genetic engineering.

Towards Balanced Energy Charging and Transmission Collision in Wireless Rechargeable Sensor Networks

Ruilong Deng,Shibo He,Peng-Cheng Chen,Youxian Sun 한국통신학회 2017 Journal of communications and networks Vol.19 No.4

By integrating sensing and computing capabilities intothe traditional radio frequency identification (RFID) tags, the wirelessidentification and sensing platform (WISP) opens up a new researcharea referred to as wireless rechargeable sensor networks(WRSNs). Since WISPs need to be fully charged and then canstart communication with the reader, thus the energy chargingand transmission collision of WISPs are different from those ofRFID tags. If the reader power is large, WISPs will be chargedfast and start data transmission almost at the same time, which resultsin heavy transmission collision and the communication delaywould be extremely large. However, if the reader power is small,WISPs will be charged slow and start data transmission one byone even without collisionh between any two WISPs, but the chargingperiod of the whole network would be extremely large. Therefore,this paper aims at determining an optimal reader power towardsbalanced energy charging and transmission collision, suchthat the total duration for all WISPs to be fully charged and completelycommunicated is minimized. Firstly, we investigate on dynamicreader power with transmission collision avoidance, andstatic reader power towards balanced energy charging and transmissioncollision. Then, we derive the optimal reader power inthree cases: (i) One reader and ray-uniformly distributed WISPs;(ii) one reader and randomly distributed WISPs; and (iii) multiplereaders and randomly distributed WISPs. Finally, the theoreticalanalysis is verified through extensive evaluations.

Perforation optimization of hydraulic fracturing of oil and gas well

Zhu, Hai Yan,Deng, Jin Gen,Chen, Zi Jian,An, Feng Chen,Liu, Shu Jie,Peng, Cheng Yong,Wen, Min,Dong, Guang Techno-Press 2013 Geomechanics & engineering Vol.5 No.5

Considering the influences of fluid penetration, casing, excavation processes of wellbore and perforation tunnels, the seepage-deformation finite element model of oil and gas well coupled with perforating technique is established using the tensile strength failure criterion, in which the user-defined subroutine is developed to investigate the dynamic evolvement of the reservoir porosity and permeability. The results show that the increases of perforation angle and decreases of perforation density lead to a higher fracture initiation pressure, while the changes of the perforation diameter and length have no evident influences on the fracture initiation pressure. As for initiation location for the fracture in wellbore, it is on the wellbore face while considering the presence of the casing. By contrast, the fractures firstly initiate on the root of the tunnels without considering casing. Besides, the initial fracture position is also related with the perforation angle. The fracture initiation position is located in the point far away from the wellbore face, when the perforation angle is around $30^{\circ}$; however, when the perforation angle is increased to $45^{\circ}$, a plane fracture is initiated from the wellbore face in the maximum horizontal stress direction; no fractures was found around perforation tunnels, when the angel is close to $90^{\circ}$. The results have been successfully applied in an oilfield, with the error of only 1.1% comparing the fracture initiation pressure simulated with the one from on-site experiment.

Hydraulic fracturing experiments of highly deviated well with oriented perforation technique

Zhu, Hai Y.,Deng, Jin G.,Liu, Shu J.,Wen, Min,Peng, Cheng Y.,Li, Ji R.,Chen, Zi J.,Hu, Lian B.,Lin, Hai,Guang, Dong Techno-Press 2014 Geomechanics & engineering Vol.6 No.2

In order to investigate the effect of different perforation angles (the angle between the perforation direction and the maximum horizontal principal stress) on the fracture initiation and propagation during hydraulic fracturing of highly deviated well in oil & gas saturated formation, laboratory experiments of the hydraulic fracturing had been carried out on the basis of non-dimensional similar criteria by using 400^3 $mm^3$ cement cubes. A plane fracture can be produced when the perforations are placed in the direction of the maximum horizontal principal stress. When the perforation angle is $45^{\circ}$, the fractures firstly initiate from the perforations at the upper side of the wellbore, and then turn to the maximum horizontal principal stress direction. When the well deviation angle and perforation angle are both between $45^{\circ}$ and $90^{\circ}$, the fractures hardly initiate from the perforations at the lower side of the wellbore. Well azimuth (the angle between the wellbore axis and the maximum horizontal principal stress) has a little influence on the fracture geometries; however it mainly increases the fracture roughness, fracture continuity and the number of secondary fractures, and also increases the fracture initiation and propagation pressure. Oriented perforating technology should be applied in highly deviated well to obtain a single plane fracture. If the well deviation angle is smaller, the fractures may link up.

Optical Cavity-Enhanced Localized Surface Plasmon Resonance for High-Quality Sensing

Chen, Jing,Zhang, Qian,Peng, Cheng,Tang, Chaojun,Shen, Xueyang,Deng, Licheng,Park, Gun-Sik IEEE 2018 IEEE photonics technology letters Vol.30 No.8

<P>We report an effective strategy to enhance the localized surface plasmon resonances (LSPRs) of metallic nanoparticles by introducing a Fabry–Pérot (FP) cavity for high-quality sensing. The concept is based on the combined excitation of LSPRs in metallic nanoparticles and optical cavity modes supported by the FP cavities, whose strong interactions result in two ultra-narrowband hybridized plasmon modes with a huge electric field enhancement. A high-quality double-band plasmonic nanosensor, with the refractive index sensitivity approaching 600 nm/RIU and a figure of merit exceeding 28 is achieved here, which suggests that the cavity-coupling strategy could offer new perspectives for achieving ultra-compact efficient biosensors.</P>

Study of the relationship between variants near CCNL1/LEKR1 and in ADCY5 with low birth weight in a Chinese population

Xuejin Fan,Qi Peng,Yanhua Chen,Zeke Ma,Xiaoguang He,Biying Deng,Hui Huang,Juan Zeng,Chuyun Cheng,Shaoji Liu,Xiaomei Lu 한국유전학회 2015 Genes & Genomics Vol.37 No.12

The aim of this study was to test the impact of variants rs900400 (located near LEKR1 and CCNL1) and rs9883204 (located in ADCY5) on birth weight in a Chinese population. We conducted a case–control study including 156 low-birth- weight infants as the case group and 100 normal-birth-weight infants as the control group. The rs900400 and rs9883204 variants were analyzed by gene sequencing in all the participants. Our results revealed a significant difference in the genotype distribution (v2 = 10.449, p = 0.005) and allele distribution (v2 = 9.277, p = 0.002) of rs900400 between the case group and the control group. The C allele of rs900400 was associated with lower birth weight (OR 1.771 [95 % CI 1.237–2.535]) in the Chinese population. However, the rs9883204 polymorphism was not informative in the Chinese population. Our study shows that the ‘‘birth weightlowering’’ variant rs900400 located near LEKR1 and CCNL1, which is strongly associated with birth weight in European cohorts, appears to have a similar association in Chinese cohorts. However, the rs9883204 variant located in ADCY5 does not appear to be correlated with low birth weight in the same population. Moreover, we found that the variant rs900400 may also be associated with premature birth, thereby supporting the need for further research in this area.

The Intrinsic Relation between the Hydrogel Structure and In Vivo Performance of Hyaluronic Acid Dermal Fillers: A Comparative Study of Four Typical Dermal Fillers

Zhou Weiwei,Hou Shuai,Deng Shu,Peng Yang,Fu Wei,Zhou Yang,Yang Jie,Peng Cheng 한국조직공학과 재생의학회 2023 조직공학과 재생의학 Vol.20 No.3

BACKGROUND: Hyaluronic acid dermal fillers are composed of cross-linked viscoelastic particles with high biocompatibility. The performance of the fillers is determined by the viscoelastic properties of particles and the connecting force between particles. However, the relationships among the properties of fillers, the interaction of the gels and the surrounding tissue are not clear enough. METHOD: Four kinds of typical dermal filler were selected in this research to reveal the interaction between the gels and cells. A series of analytical tools was applied to characterize the structure and physicochemical properties of the gel, as well as observing their interaction with the surrounding tissues in vivo and discussing their internal mechanism. RESULT: The large particles internal the gel and the high rheological properties endow the Restylane2 with excellent support. However, these large-size particles have a significant impact on the metabolism of the local tissue surrounding the gel. Juve´derm3 present gel integrity with the high cohesiveness and superior support. The rational matching of large and small particles provides the Juve´derm3 with supporting capacity and excellent biological performance. Ifresh is characterized by small-size particles, moderate cohesiveness, good integrity, lower viscoelasticity and the superior cellular activity located the surrounding tissues. Cryohyaluron has high cohesion and medium particle size and it is prominent in cell behaviors involving localized tissues. Specific macroporous structure in the gel may facilitate the nutrients delivering and removing the waste. CONCLUSION: It’s necessary to make the filler both sufficient support and biocompatibility through the rational matching of particle sizes and rheological properties. Gels with macroporous structured particle showed an advantage in this area by providing a space inside the particle.

MiR-214 Regulates the Human Hair Follicle Stem Cell Proliferation and Differentiation by Targeting EZH2 and Wnt/b- Catenin Signaling Way In Vitro

Ke-Tao Du,Jia-Qin Deng,Xu-Guang He,Zhao-ping Liu,Cheng Peng,Mingsheng Zhang 한국조직공학과 재생의학회 2018 조직공학과 재생의학 Vol.15 No.3

miR-214 plays a major role in the self-renewal of skin tissue. However, whether miR-214 regulates the proliferation and differentiation of human hair follicle stem cells (HFSCs) is unknown. Primary HFSCs were isolated from human scalp skin tissue, cultured, and identified using flow cytometry. An miR-214 mimic and inhibitor were constructed for transfection into HFSCs. The MTS and colony formation assays examined cell proliferation. Immunofluorescence detected the localization and expression levels of TCF4, b-catenin, and differentiation markers. Luciferase reporter and TOP/FOP Flash assays investigated whether miR-214 targeted EZH2 and regulated the Wnt/b-catenin signaling pathway. Western blot determined the expression levels of enhancer of zeste homolog 2 (EZH2), Wnt/b-catenin signaling-related proteins, and HFSC differentiation markers in cells subjected to miR-214 transfection. miR-214 expression was remarkably decreased during the proliferation and differentiation of HFSCs into transit-amplifying (TA) cells. Downregulation of miR- 214 promotes the proliferation and differentiation of HFSCs. Overexpression of miR-214 led to decreased expression of EZH2, b-catenin, and TCF-4, whereas downregulation of miR-214 resulted in increased expression of EZH2, b-catenin, and TCF-4 as well as TA differentiation markers. Immunofluorescence assay revealed that inhibiting miR-214 triggered the entry of b-catenin and TCF-4 into the nucleus. The luciferase reporter and TOP/FOP Flash assays demonstrated that miR- 214 directly targets EZH2 and affects Wnt/b-catenin signaling. The miR-214/EZH2/b-catenin axis could be considered a candidate target in tissue engineering and regenerative medicine for HFSCs.