http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Kang, Narae,Park, Ji Hoon,Ko, Kyoung Chul,Chun, Jiseul,Kim, Eunchul,Shin, Hee‐,Won,Lee, Sang Moon,Kim, Hae Jin,Ahn, Tae Kyu,Lee, Jin Yong,Son, Seung Uk WILEY‐VCH Verlag 2013 Angewandte Chemie Vol.125 No.24
<P><B>Kleine Poren</B>: Benzodifuran‐Einheiten wurden mithilfe eines Tandemprozesses, bestehend aus einer Sonogashira‐Kupplung von 1,3,5‐Triethinylbenzol und 2,5‐Diiod‐1,4‐hydrochinon und einer intramolekularen Cyclisierung, in mikroporöse organische Netzwerke (MONs) eingeführt. Das resultierende Benzodifuran‐haltige MON zeigte vielversprechende photokatalytische Aktivität in der oxidativen Umsetzung primärer Amine zu Iminen.</P>
Kang, Narae,Park, Ji Hoon,Choi, Jaewon,Jin, Jaewon,Chun, Jiseul,Jung, Il Gu,Jeong, Jaehong,Park, Je‐,Geun,Lee, Sang Moon,Kim, Hae Jin,Son, Seung Uk WILEY‐VCH Verlag 2012 Angewandte Chemie Vol.124 No.27
<P><B>Röhren aus Röhren</B>: Mikroporöse organische Nanoröhren wurden durch Sonogashira‐Kupplung zwischen Tetra(4‐ethinylphenyl)methan und <I>N</I>,<I>N</I>′‐Di(4‐iodphenyl)‐4,4′‐bipyridiniumdichlorid erhalten. Diese Nanoröhren dienten als Template für sekundäre anorganische Materialien, nämlich Fe<SUB>2</SUB>O<SUB>3</SUB>‐Nanoröhren mit hoher Entladekapazität und ausgezeichneter Stabilität.</P>
Structural Analysis of Rear Support and Connection Part of 3-Wheel Riding Type Cultivating Vehicle
( Narae Kang ),( Ilsu Choi ),( Youngkeun Kim ),( Youngtae Yun ),( Yong Choi ),( Soonam Yoo ) 한국농업기계학회 2018 한국농업기계학회 학술발표논문집 Vol.23 No.1
Four-wheel riding-type cultivator is mainly used for pesticide applicator, fertilizer spreader and vinyl mulching in Korea. Adjustment of the vehicle width depends on the farming modes and to whom it is attached. It is difficult to check the work status. So a three-wheel riding-type cultivator is being developed for the field of crops to improve performance such as ground clearance, width control, steering system and work convenience. In order to optimally design, structural analysis of the connection part and rear support was carried out. In this study, 3D modeling of the rear support and connection part was followed by analysis of the strain, stress and safety factor of the three-wheel riding-type cultivator using CAE. First, drawings of the three-wheel riding-type cultivator were prepared in 3D using Solid Works and then linear static analysis was conducted with the ANSYS Ver.13.0 structural analysis program. Structural Steel was selected as the material of the three-wheel riding-type cultivator and the automatic mesh generator of ANSYS was used. The mesh consists of 52,018 nodes and 24,713 elements. And contact and constraint conditions were set. The 5,439 N load was applied to the two connection parts in consideration of the weight of the three-wheel drive type control unit. A linear static analysis was carried out for checking static state operation. Finally, strain and stress, safety factor were analyzed. As a result of the stress analysis, the deformation amount was 8.4 mm at the connection part of the upper support frame. The bottom support part was most vulnerable to safety factor 0.3. Therefore, the materials of this site would be reinforced and supplemented.
Kang, Narae,Park, Ji Hoon,Jin, Mingshi,Park, Nojin,Lee, Sang Moon,Kim, Hae Jin,Kim, Ji Man,Son, Seung Uk American Chemical Society 2013 JOURNAL OF THE AMERICAN CHEMICAL SOCIETY - Vol.135 No.51
<P>Hollow microporous organic networks (<B>H-MON</B>s) were prepared by a template method using silica spheres. The shell thickness was delicately controlled by changing the synthetic conditions. The <B>H-MON</B>s were used as a template for the synthesis of nanoparticulate Co<SUB>3</SUB>O<SUB>4</SUB> hollows which showed excellent catalytic performance in H<SUB>2</SUB>O<SUB>2</SUB> oxidation.</P><P><B>Graphic Abstract</B> <IMG SRC='http://pubs.acs.org/appl/literatum/publisher/achs/journals/content/jacsat/2013/jacsat.2013.135.issue-51/ja411263h/production/images/medium/ja-2013-11263h_0006.gif'></P><P><A href='http://pubs.acs.org/doi/suppl/10.1021/ja411263h'>ACS Electronic Supporting Info</A></P>
Narae Kang,Yonsoo Kim,Hui Seung Noh,Hung Soo Kim 한국방재학회 2016 Journal of Disaster Management Vol.1 No.4
Rainfall has recently begun to show different properties in space and time. In particular, although localized heavy rainfall is frequent, rain gauges on the ground can only observe rainfall at one point. In other words, ground-based rain gauges have limitations in spatial and temporal resolution for measuring rainfall. As a result, there is a need to utilize radar rainfall measurements that can consider the spatial distribution of the change in rainfall based on the direction of the storm. In this study, we tried to apply radar rainfall for a runoff simulation of an urban drainage system. The study area was Guro-gu, Seoul City, Korea, and we divided the study area into sub-basins based on the rain gauge network of the AWS (Automatic Weather Station). Then, the radar rainfall data were adjusted using the rainfall data of the rain gauge stations, and the areal rainfall amounts were obtained. The runoffs were simulated using the XP-SWMM model in the sub-basins of an urban drainage system. As a result, the adjusted radar rainfalls underestimated the ground-based measurement data by 60 to 95%. Therefore, differences in runoffs simulated by the adjusted radar and the gauge rainfall amounts are found. The peak runoff time from the radar rainfall occurred earlier than that from the gauge rainfall. This result is due to the fact that the radar rainfall can reflect the spatial variability of the rainfall in time by taking into consideration the movement of a storm.
수집형 마늘 수확기 이용 난지형 마늘 수확 포장성능 시험
강나래 ( Narae Kang ),최일수 ( Ilsu Choi ),이예슬 ( Yeseul Kim ),김영근 ( Youngkeun Kim ),최덕규 ( Duckkyu Choi ),최용 ( Yong Choi ),권영석 ( Youngseok Kwon ),김재동 ( Jaedong Kim ),하창섭 ( Changseob Ha ),이종원 ( Jongwon Lee ) 한국농업기계학회 2020 한국농업기계학회 학술발표논문집 Vol.25 No.2
마늘은 기후에 따라 생육 특성의 차이가 뚜렷한 작물로 생육지역의 기후특성에 따라 한지형과 난지형으로 구분되며, 재배양식에 차이가 있어 농기계 개발에 어려움이 있다. 마늘 재배 기계화율은 ’18년 58.6%로 보고되고 있으나, 수확 작업은 36.7%로 기계화가 특히 미흡한 실정으로 트랙터 또는 경운기용 땅속작물 수확기(굴취기)를 이용하여 굴취 후 인력으로 뿌리에 붙은 흙을 털어내며 수집하고 있어 인력 의존도가 높은 실정이다. 이에 본 연구는 마늘굴취와 뿌리흙 제거, 수집을 일관적으로 수행하는 수집형 마늘수확기를 개발하고 난 지형 마늘을 대상으로 포장성능 시험을 수행하였다. 마늘 수확 포장성능 시험은 경상남도 창녕군 소재 농가포장에서 난지형 대서마늘(Allium sativum L.)을 대상으로 선정하였다. 요인별 20 m 시험구간 조성하였으며, 수확 시험 전 마늘 줄기를 지면으로부터 약 3 cm 내외로 절단하였다. 60kW급 트랙터를 이용하여 작업속도 3수준(0.07, 0.09, 0.11 m/s), 이송속도 3수준(70, 85, 95 rpm)을 요인으로 수행하였다. 수집형 마늘수확기의 수확성능 분석을 위해 시험 구간내 미수집된 마늘을 조사하였으며, 수확기 수집부에 수확된 마늘의 손상률, 이물질 혼입률을 분석하였다. 손상률의 경우 찍힘 등의 외부손상과 멍에 의한 내부손상을 조사하였으며, 멍에 의한 내부손상은 마늘을 수확 후 저장기간 동안 멍에 의한 부패 발생을 20일 동안 조사하였다. 이물질 혼입률은 수집부에 수확된 마늘과 흙을 분리하여 무게를 조사, 비교하였다. 수집형 마늘수확기의 요인별 유의성을 검정하기 위하여 분산분석(ANOVA)을 수행하였으며, 5% 유의수준에서 Duncan의 다중비교를 수행하였다. 포장성능 시험 결과 작업속도 0.11 m/s, 이송속도 85 rpm에서 손실률 2.3%, 손상률 2.2%, 이물질 혼입률 1.5%로 가장 양호하였다. 분산분석 결과 신뢰수준 95%에서 손실률과 이물질 혼입률은 작업속도 및 이송속도 간 유의성이 나타나지 않았으나, 손상률은 작업속도 및 이송속도 간 유의성이 나타났다.
45kW급 전자 제어형 승용 자주식 마늘수집기 포장성능시험 (Ⅱ)
강나래 ( Narae Kang ),김영화 ( Younghwa Kim ),이예슬 ( Yeseul Kim ),유승화 ( Seounghwa Yu ),남영조 ( Youngjo Nam ),권승귀 ( Seunggwi Kwon ),하유신 ( Yushin Ha ),박형규 ( Hyunggyu Park ) 한국농업기계학회 2022 한국농업기계학회 학술발표논문집 Vol.27 No.2
마늘재배 기계화율은 평균 59.2%로 마늘재배 전과정 중 파종·정식과 수확작업의 기계화율은 각각 16.1%, 수확 39.2%로 미흡한 실정이다. 수확작업의 경우 수확 15∼20일 전 줄기절단작업을 진행하고, 트랙터 부착형 땅속 작물 수확기로 마늘을 굴취한다. 굴취한 마늘은 노지에서 건조과정 거친 후 수집작업을 하고 있으며, 수집작업은 대부분 인력에 의존하고 있어 많은 노동력이 소모되고 있는 실정이다. 따라서 본 연구에서는 승용 자주식 마늘수집기 시작기를 이용하여 주행속도 및 이송속도에 따른 포장성능시험을 수행하였다. 포장성능시험에서 사용한 마늘수집기 시작기는 크롤러 타입으로 주행부와 수집부, 이송부, 선별부, 수납부로 구성되어 있으며, 수집부를 통해 수확된 마늘의 뿌리에 부착되어 있는 이물질을 이송부에서 분리하고, 아직 남아 있는 이물질은 선별부에서 보조작업자가 선별하여 수납될 수 있도록 설계·제작하였다. 포장성능시험은 남도마늘을 대상으로 경상북도 성주군 소재 농가포장에서 진행하였으며, 주행속도 3수준(0.2, 0.3, 0.4 m/s)과 이송속도 3수준(60, 70, 80 rpm)을 요인으로 수행하였다. 요인별 시험구간을 3 m로 설정하고, 3반복 진행하였으며, 성능분석은 마늘수집기 시작기로 수집되지 않고, 포장에 남아 있는 마늘을 조사한 손실률, 수집된 마늘의 찍힘, 쪼개짐, 멍 등을 조사한 손상률, 수집부에 담긴 마늘과 이물질 비율을 조사한 이물질 혼입률을 분석하였다. 손상률은 요인별 수집부에 담긴 마늘에서 임의로 30개를 선정하여 껍질을 제거하여 멍을 조사하였다. 성능시험 결과 주행속도 0.2m/s, 이송속도 70 rpm에서 손실률 1.54%로 가장 양호하였다.
고추 지주대 설치·제거 시작기 설계·제작 및 포장성능시험
강나래 ( Narae Kang ),김영화 ( Younghwa Kim ),이예슬 ( Yeseul Kim ),유승화 ( Seounghwa Yu ),우제근 ( Jeakeun Woo ),최일수 ( Ilsu Choi ),최용 ( Yong Choi ),김영근 ( Youngkeun Kim ) 한국농업기계학회 2021 한국농업기계학회 학술발표논문집 Vol.26 No.2
고추는 특유의 매운맛으로 고추장, 고춧가루 등 식재료로 사용되며, 우리나라 음식문화에서 빼놓을 수 없는 양념채소이다. 그러나 노동집약적 작물로 노동투입시간은 2020년 기준 141 h/10a로 다른 양념채소인 마늘 113.6 h/10a, 양파 98.8 h/10a에 비해 높아 노동력 소모가 크며, 고추 재배의 노동력 및 생산비 절감이 필요하다. 고추 재배 기계화율은 47%로 다른 주요 작물(마늘 59.2%, 양파 63.6%)에 비해 미흡한 실정으로 고추 재배 작업 생력화를 통한 농가 경쟁력 제고를 위해서는 정식, 지주대 설치·제거 등 재배 작업의 기계화 기술이 필요하다. 이에 본 연구는 고추 지주대 설치·제거 시작기를 설계·제작하고, 포장성능시험 수행 및 지주대 설치·제거 작업성능을 분석하고자 하였다. 고추 지주대 설치·제거 시작기는 보행형으로 전동실린더를 이용하여 고추 지주대를 관입 및 인발 하도록 설계·제작하였으며, 전동실린더, 배터리, 지주대 가이드, 속도 제어부로 구성하였다. 포장성능시험은 국립농업 과학원 농업공학부 구내포장에서 진행하였으며, 고추 재배 농가를 조사하여 두둑높이 20.2±0.5 m, 두둑폭 60.7±0.5 m, 지주대 관입깊이 0.3 m로 설정하였다. 또한, 고추 지주대 3종류(1자형, U자형, 송곳형) 및 관입방식(시작기, 망치)을 요인으로 관입저항력 및 인발력 등 고추 지주대 설치·제거 시작기 성능을 분석하였으며, 관입저항력 및 인발력을 측정하기 위해 지주대 및 시작기 인발장치에 로드셀을 부착하였다. 포장성능시험 결과 시작기 이용 지주대 관입의 경우 최대 관입력은 1자형 529.9 N, U자형 462.4 N, 송곳형 559.1 N이며, 관행(망치)작업의 경우 최대 관입력은 1자형 562.1 N, U자형 572.5 N, 송곳형 483.9 N으로 분석되었다. 지주대 제거를 위한 최대 인발력을 시작기 이용 시 1자형 77.1 N, U자형 87.0 N, 송곳형 74.5 N, 관행(지주대 제거기) 이용 시 1자형 111.6 N, U자형 130.7 N, 송곳형 195.9 N로 분석되었다. 관행 및 시작기 지주대 관입시험 시 관입력은 유사하였으나, 시작기 이용 지주대 관입시간이 감소하였다. 또한, 인발시험의 경우 관행 대비 시작기 사용 시 최대 인발력이 감소한 것으로 나타났다.