Effect of composite biological preservative containing Lactobacillus plantarum on postharvest litchi quality

Cong Xu,Wen-feng Hu,Shi Luo,Hua-jian Luo,Ke Ma,Yan-fang Li 한국식품과학회 2016 Food Science and Biotechnology Vol.25 No.6

Biological preservatives containing live microorganisms are environmentally friendly and non-toxic substances used to preserve the quality of fresh fruits. This study investigated whether a composite biological preservative containing live Lactobacillus plantarum (designated as DN003) could preserve the quality of postharvest litchi fruits at high temperature and in humid environment. Postharvest litchi fruits were briefly soaked in DN003, then dried and stored at 29–33oC with 95–98% relative humidity; prochloraz treatment was included as positive control and non-treatment as negative control. In comparison with negative control group, litchi fruits in both DN003-treated and positive control groups better retained their appearance with lower polyphenol oxidase and peroxidase activities and showed higher concentrations of vitamin C, titratable acids, and total sugar content. These data demonstrated that the new composite biological preservative containing L. plantarum is promising to be used in the preservation of postharvest litchi fruit, particularly in hightemperature and humid environment.

Enhanced cyclic stability of CO_2 adsorption capacity of CaO-based sorbents using La_2O_3 or Ca_12Al_14O_33 as additives

Cong Luo,Ying Zheng,Ning Ding,Chuguang Zheng 한국화학공학회 2011 Korean Journal of Chemical Engineering Vol.28 No.4

To improve the stability of CaO adsorption capacity for CO_2 capture during multiple carbonation/calcination cycles, modified CaO-based sorbents were synthesized by sol-gel-combustion-synthesis (SGCS) method and wet physical mixing method, respectively, to overcome the problem of loss-in-capacity of CaO-based sorbents. The cyclic CaO adsorption capacity of the sorbents as well as the effect of the addition of La_2O_3 or Ca_12Al_14O_33 was investigated in a fixed-bed reactor. The transient phase change and microstructure were characterized by X-ray diffraction (XRD) and field emission scanning electron microscopy (FSEM), respectively. The experimental results indicate that La_2O_3 played an active role in the carbonation/calcination reactions. When the sorbents were made by wet physical mixing method,CaO/Ca_12Al_14O_33 was much better than CaO/La_2O_3 in cyclic CO_2 capture performance. When the sorbents were made by SGCS method, the synthetic CaO/La_2O_3 sorbent provided the best performance of a carbonation conversion of up to 93% and an adsorption capacity of up to 0.58 g-CO_2/g-sorbent after 11 cycles.

Cyclic CO2 capture characteristics of a pellet derived from sol-gel CaO powder with Ca12Al14O33 support

Cong Luo,Ying Zheng,Yongqing Xu,Haoran Ding,Chuguang Zheng,Changlei Qin,Bo Feng 한국화학공학회 2015 Korean Journal of Chemical Engineering Vol.32 No.5

A novel calcium-based pellet was prepared by extrusion of sol-gel CaO powder and cement with high aluminum- based content. Limestone was used for comparison. The cyclic CO2 capture performance and carbonation kinetics of the sorbents were investigated in a thermogravimetric analyzer (TGA). The changes in phase and microstructure were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Brunauer Emmet Teller (BET) surface area, respectively. The results indicate that the pellet consisted of CaO and Ca12Al14O33 after initial calcination. Limestone reactivity decreased dramatically with the increase in the cycle number, whereas the pellet showed a relatively stable cyclic CO2 capture performance with high reactivity. The CO2 capture capacity of the pellet achieved 0.43 g CO2/g sorbent after 50 cycles at 650 oC and 850 oC for carbonation and calcination, respectively. Moreover, the pellet obtained fast carbonation rates with slight decay after multiple cycles. The porous microstructure of the pellet contributed to the high reactivity of the sorbent during high temperature reactions, and the support material of Ca12Al14O33, enhanced the cyclic durability of the calcium-based sorbents.

Effect of composite biological preservative containing Lactobacillus plantarum on postharvest litchi quality

Xu, Cong,Hu, Wen-feng,Luo, Shi,Luo, Hua-jian,Ma, Ke,Li, Yan-fang 한국식품과학회 2016 Food Science and Biotechnology Vol.25 No.6

Biological preservatives containing live microorganisms are environmentally friendly and non-toxic substances used to preserve the quality of fresh fruits. This study investigated whether a composite biological preservative containing live Lactobacillus plantarum (designated as DN003) could preserve the quality of postharvest litchi fruits at high temperature and in humid environment. Postharvest litchi fruits were briefly soaked in DN003, then dried and stored at $29-33^{\circ}C$ with 95-98% relative humidity; prochloraz treatment was included as positive control and non-treatment as negative control. In comparison with negative control group, litchi fruits in both DN003-treated and positive control groups better retained their appearance with lower polyphenol oxidase and peroxidase activities and showed higher concentrations of vitamin C, titratable acids, and total sugar content. These data demonstrated that the new composite biological preservative containing L. plantarum is promising to be used in the preservation of postharvest litchi fruit, particularly in high-temperature and humid environment.

CORROSION BEHAVIOR OF AUSTENITIC AND FERRITIC STEELS IN SUPERCRITICAL WATER

Luo, Xin,Tang, Rui,Long, Chongsheng,Miao, Zhi,Peng, Qian,Li, Cong Korean Nuclear Society 2008 Nuclear Engineering and Technology Vol.40 No.2

The general corrosion behavior of austenitic and ferritic steels(316L, 304, N controlled 304L, and 410) in supercritical water is investigated in this paper. After exposure to deaerated supercritical water at $480^{\circ}C$/25 MPa for up to 500 h, the four steels studied were characterized using gravimetry, scanning electron microscopy/energy dispersive X-ray spectroscopy(SEM/EDS), X-ray photoelectron spectroscopy(XPS), and X-ray diffraction(XRD). The results show that the 316L steel with a higher Cr and Ni content has the best corrosion-resistance performance among the steels tested. In addition to the oxide layer mixed with $Fe_{3}O_{4}$ and $(Fe,Cr)_{3}O_{4}$ that formed on all the samples, a $Fe_{3}O_{4}$ loose outer layer was observed on the 410 steel. The corrosion mechanism of stainless steels in supercritical water is discussed based on the above results.

Vγ1+ γδT Cells Are Correlated With Increasing Expression of Eosinophil Cationic Protein and Metalloproteinase-7 in Chronic Rhinosinusitis With Nasal Polyps Inducing the Formation of Edema

Luo-ying Yang,Xia Li,Wen-ting Li,Jian-cong Huang,Zhi-yuan Wang,Zi-zhen Huang,Li-hong Chang,Ge-hua Zhang 대한천식알레르기학회 2017 Allergy, Asthma & Immunology Research Vol.9 No.2

Purpose: We have found that expression of γδT cells is increased in pathological mucosa of chronic rhinosinusitis with nasal polyps (CRSwNP) compared with normal nasal mucosa. This increase is correlated with the infiltration of eosinophils in CRSwNP. Here, we investigated the expression of γδT cells, inflammation and tissue remodeling factors as well as their probable relationships in different types of chronic rhinosinusitis (CRS) in China. Methods: A total of 76 surgical tissue samples that included 43 CRSwNP samples (15 eosinophilic and 28 non-eosinophilic), 17 CRS samples without nasal polyps (CRSsNP), and 16 controls were obtained. Quantitative reverse transcription-polymerase chain reaction (RT-PCR) was used to measure the mRNA expression levels of Vγ1+ γδT cells, Vγ4+ γδT cells, eosinophil cationic protein (ECP), interleukin (IL)-8, transforming growth factor (TGF)-β2, metalloproteinase (MMP)-7, tissue inhibitor of metalloproteinase (TIMP)-4 and hypoxia-inducible factor (HIF)-1α. Enzyme linked immunosorbent assay (ELISA) was used to measure the protein level of ECP and MMP-7 in CRSwNP. The eosinophils were counted and the level of edema was analyzed with HE staining. Results: The mRNA expression levels of the Vγ1 subset, ECP and MMP-7 were significantly increased in CRSwNP with histological characteristics of eosinophilic infiltration and edema. The expression of the Vγ1 gene in CRSwNP correlated positively with the expression of both ECP and MMP-7. No significant decreases in the mRNA expression levels of TGF-β2, TIMP-4 or HIF-1α were observed in the CRSwNP samples. The expression levels of Vγ1 gene, ECP and MMP-7 were significantly increased in eosinophilic CRSwNP compared to non-eosinophilic CRSwNP. Conclusions: Our results suggest the associations between Vγ1+ γδT cells, ECP and MMP-7 in CRSwNP, indicating that Vγ1+ γδT cells can induce the eosinophilic inflammation, which has a further effect on the formation of edema.

Combining different forms of statistical energy analysis to predict vibrations in a steel box girder comprising periodic stiffening ribs

Hao Luo,Zhiyang Cao,Xun Zhang,Cong Li,Derui Kong 국제구조공학회 2022 Steel and Composite Structures, An International J Vol.45 No.1

Due to the complexity of the structure and the limits of classical SEA, a combined SEA approach is employed, with angle-dependent SEA in the low- and mid-frequency ranges and advanced SEA (ASEA) considering indirect coupling in the high-frequency range. As an important component of the steel box girder, the dynamic response of an L-junction periodic ribbed plate is calculated first by the combined SEA and validated by the impact hammer test and finite element method (FEM). Results show that the indirect coupling due to the periodicity of stiffened plate is significant at high frequencies and may cause the error to reach 38.4 dB. Hence, the incident bending wave angle cannot be ignored in comparison to classical SEA. The combined SEA is then extended to investigate the vibration properties of the steel box girder. The bending wave transmission study is likewise carried out to gain further physical insight into indirect coupling. By comparison with FEM and classical SEA, this approach yields good accuracy for calculating the dynamic responses of the steel box girder made of periodic ribbed plates in a wide frequency range. Furthermore, the influences of some important parameters are discussed, and suggestions for vibration and noise control are provided.

Effects of ruminally degradable starch levels on performance, nitrogen balance, and nutrient digestibility in dairy cows fed low corn-based starch diets

Guobin Luo,Wenbin Xu,Jinshan Yang,Yang Li,Liyang Zhang,Yizhen Wang,Cong Lin,Yonggen Zhang 아세아·태평양축산학회 2017 Animal Bioscience Vol.30 No.5

Objective: This trial was performed to examine the effects of ruminally degradable starch (RDS) levels in total mixed ration (TMR) with low corn-based starch on the milk production, whole-tract nutrient digestibility and nitrogen balance in dairy cows. Methods: Eight multiparous Holstein cows (body weight [BW]: 717±63 kg; days in milk [DIM]: 169±29) were assigned to a crossover design with two dietary treatments: a diet containing 62.3% ruminally degradable starch (% of total starch, low RDS) or 72.1% ruminally degradable starch (% of total starch, high RDS). Changes to the ruminally degradable levels were conducted by using either finely ground corn or steam-flaked corn as the starch component. Results: The results showed that dry matter intake, milk yield and composition in dairy cows were not affected by dietary treatments. The concentration of milk urea nitrogen was lower for cows fed high RDS TMR than low RDS TMR. The whole-tract apparent digestibility of neutral detergent fiber, acid detergent fiber and crude protein decreased, and that of starch increased for cows fed high RDS TMR over those fed low RDS TMR, with no dietary effect on the whole-tract apparent digestibility of dry matter and organic matter. The proportion of urinary N excretion in N intake was lower and that of fecal N excretion in N intake was higher for cows fed high RDS TMR than those fed low RDS TMR. The N secretion in milk and the retention of N were not influenced by the dietary treatments. Total purine derivative was similar in cows fed high RDS TMR and low RDS TMR. Consequently, estimated microbial N flow to the duodenum was similar in cows fed high RDS TMR and low RDS TMR. Conclusion: Results of this study show that ruminally degradable starch levels can influence whole-tract nutrient digestibility and nitrogen balance in dairy cows fed low corn-based starch diets, with no influence on performance.

Efficient and Cost-Reduced Glucoamylase Fed-Batch Production with Alternative Carbon Sources

( Hong Zhen Luo ),( Han Liu ),( Zhenni He ),( Cong Zhou ),( Zhong Ping Shi ) 한국미생물 · 생명공학회 2015 Journal of microbiology and biotechnology Vol.25 No.2

Glucoamylase is an important industrial enzyme. Glucoamylase production by industrial Aspergillus niger strain featured with two major problems: (i) empirical substrate feeding methods deteriorating the fermentation performance; and (ii) the high raw materials cost limiting the economics of the glucoamylase product with delegated specification. In this study, we first proposed a novel three-stage varied-rate substrate feeding strategy for efficient glucoamylase production in a 5 L bioreactor using the standard feeding medium, by comparing the changing patterns of the important physiological parameters such as DO, OUR, RQ, etc., when using different substrate feeding strategies. With this strategy, the glucoamylase activity and productivity reached higher levels of 11,000 U/ml and 84.6 U/ml/h, respectively. The performance enhancement in this case was beneficial from the following results: DO and OUR could be controlled at the higher levels (30%, 43.83 mmol/l/h), while RQ was maintained at a stable/lower level of 0.60 simultaneously throughout the fed-batch phase. Based on this three-stage varied-rate substrate feeding strategy, we further evaluated the economics of using alternative carbon sources, attempting to reduce the raw materials cost. The results revealed that cornstarch hydrolysate could be considered as the best carbon source to replace the standard and expensive feeding medium. In this case, the production cost of the glucoamylase with delegated specification (5,000 U/ml) could be saved by more than 61% while the product quality be ensured simultaneously. The proposed strategy showed application potential in improving the economics of industrial glucoamylase production.

Task Assignment Model for Crowdsourcing Software Development: TAM

Muhammad Zahid Tunio,Haiyong Luo,Cong Wang,Fang Zhao,Abdul Rehman Gilal,Wenhua Shao 한국정보처리학회 2018 Journal of information processing systems Vol.14 No.3

Selection of a suitable task from the extensively available large set of tasks is an intricate job for the developersin crowdsourcing software development (CSD). Besides, it is also a tiring and a time-consuming job for theplatform to evaluate thousands of tasks submitted by developers. Previous studies stated that managerial andtechnical aspects have prime importance in bringing success for software development projects, however,these two aspects can be more effective and conducive if combined with human aspects. The main purpose ofthis paper is to present a conceptual framework for task assignment model for future research on the basis ofpersonality types, that will provide a basic structure for CSD workers to find suitable tasks and also a platformto assign the task directly. This will also match their personality and task. Because personality is an internalforce which whittles the behavior of developers. Consequently, this research presented a Task AssignmentModel (TAM) from a developers point of view, moreover, it will also provide an opportunity to the platformto assign a task to CSD workers according to their personality types directly.