Bioelectrochemical performance of microbial fuel cell powered electro-Fenton system (MFCⓅEFs) with composite PANI-Mn/CF anode

Jiaqi Lv,Weiye Wang,Qingliang Zhao,Kun Wang 대한환경공학회 2023 Environmental Engineering Research Vol.28 No.4

Microbial fuel cell powered electro-Fenton system (MFCⓅEFs) is a self-sustainable energy conversion process to degrade refractory pollutants utilizing green biomass energy. Most previous works usually employed innovative cathode to minimize electron transfer losses but neglected the development of high-efficiency anode to enhance electron generation. The synergy of polyaniline (PANI) and MnO2 on electrode could improve charge accessibility and facilitate rapid electron transfer due to its superior conductivity and capacitance, which had not been applied to MFCⓅEFs as anode so far. In this study, a PANI-Mn/CF (carbon fiber loaded with polyaniline and MnO2) composite anode was introduced into MFCⓅEFs to enhance interface activity and realize more efficient electricity generation and pollutant degradation. Experimental results showed that a higher power density (5.49 times that of the original CF) and lower ohmic resistance (7.17 Ω) occurred in the MFCⓅEFs with PANI-Mn/CF anode, which consumed more sewage sludge (37.14% of TCOD removal), leading to achieving more effective pollutant degradation (93.03% of tetracycline hydrochloride removal). Overall, this study provided an innovative way of thinking and approach to efficient utilization of biomass waste and degradation of refractory pollutants with the merits of environmental sustainability.

Effects of habitat fragmentation on genetic diversity and gene flow among the Homidia socia (Collembola: Entomobryidae) populations in the Thousand Island Lake

웨이왕,Kun LV,Ji-Rui WANG,Jing ZHOU,Jian-Qiang GU,Guo-Xin ZHOU,Zhi-Hong XU 한국곤충학회 2019 Entomological Research Vol.49 No.3

In the present study, partial sequences of the mitochondrial cytochrome oxidase subunit I (COI) gene of 22 island populations of the springtail Homidia socia in the Thousand Island Lake were sequenced. Across all sequences, 37 haplotypes were identified for the 510-bp mitochondrial (mt) DNA COI gene. Haplotype 2 was the most common, and was distributed in the most of the 22 island populations. Haplotype diversity ranged from 0.065 to 0.733, and the total genetic diversity was 0.56216. The genetic characteristics of the 22 island populations were analyzed using the fixation index and gene flow, with values of 0.00043– 0.94900 and 0.02703–703.72540, respectively. Comparison between (island area and isolations) with population genetic diversity revealed that there were no significant correlations between them, except for a significant correlation between the number of haplotypes and island area. Mantel tests showed that there was no significant correlation between geographic distance and genetic distance among various groups. All the results indicated that there were no obvious relationships between island characteristics and the genetic diversity of the springtails. We consider that the low dispersal capacity of springtails and the island patches surrounded by water in the Thousand Island Lake are the major factors affecting the genetic diversity of H. socia.

Determining the Walker exponent and developing a modified Smith-Watson-Topper parameter model

Zhiqiang Lv,Hong-Zhong Huang,Hai-Kun Wang,Huiying Gao,Fang-Jun Zuo 대한기계학회 2016 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.30 No.3

Mean stress effects significantly influence the fatigue life of components. In general, tensile mean stresses are known to reduce the fatigue life of components, whereas compressive mean stresses are known to increase it. To date, various methods that account for mean stress effects have been studied. In this research, considering the high accuracy of mean stress correction and the difficulty in obtaining the material parameter of the Walker method, a practical method is proposed to describe the material parameter of this method. The test data of various materials are then used to verify the proposed practical method. Furthermore, by applying the Walker material parameter and the Smith-Watson-Topper (SWT) parameter, a modified strain-life model is developed to consider sensitivity to mean stress of materials. In addition, three sets of experimental fatigue data from super alloy GH4133, aluminum alloy 7075-T651, and carbon steel are used to estimate the accuracy of the proposed model. A comparison is also made between the SWT parameter method and the proposed strainlife model. The proposed strain-life model provides more accurate life prediction results than the SWT parameter method.

Lifetime prediction for turbine discs based on a modified Walker strain model

Zhiqiang Lv,Hong-Zhong Huang,Huiying Gao,Fang-Jun Zuo,Hai-Kun Wang 대한기계학회 2015 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.29 No.10

We created three-dimensional models of turbine disc and blades of a type of aero-engine according to their geometries. Extant studies show that low cycle fatigue is the main failure mechanism of turbine disc. By using a non-linear elastic-plasticfinite element method, the static stress and strain state of the critically high stress regions, which can lead to operational failures,are determined. On the basis of stress-strain relation, a modified Walker strain life prediction model is proposed with norequired knowledge on the mean stress correction. Then the predicted life data from the modified Walker strain model arecompared with the testing results. After the verification, the modified Walker strain life prediction model and Miner’s rule wereapplied to predict the lifetime of the turbine disc under various operating conditions.

Chinoketides A and B, Two New Antimicrobial Polyketides from the Endophytes of Distylium chinense with the "Black-Box" Co-culture Method

Meng-Meng Lv,Ming-Hui Tan,Li-Wen Lu,Rong-Hua Zhang,Zhi-Yong Guo,Cheng-Xiong Liu,Jin Yang,Kun Zou,Peter Proksch 한국생약학회 2018 Natural Product Sciences Vol.24 No.3

Two new polyketides, chinoketides A and B (1 - 2) with a known compound xylarphthalide A (3), were isolated from the solid medium of the endophytes from the leaves of the relic plant Distylium chinense with the "black-box" co-culture method, and the structures of two new compounds were elucidated by NMR, MS and CD spectra. And the absolute configurations of chinoketides A (1) and B (2) were determined as 2R,3R,8S and 5R,6S by calculating their ECD spectra to compare with the experimental CD spectra. Finally, the antimicrobial activities were evaluated to Erwinia carotovora sub sp. Carotovora (Jones) Bersey et al, and the results showed that compounds 1 - 3 displayed the antimicrobial activities with MIC value at 20.5, 30.4 and 10.2 mg/mL.

Differential Diagnosis of CT Images in Children with Neuroblastomas and Ganglioneuroblastomas

Zhuang, Bo,Lv, Deng-Kun,Gao, Si-Ju,Meng, Jing-Jing Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.23

Objective: To investigate the differential features of CT images in children with neuroblastomas (N) and ganglioneuroblastomas (G). Materials and Methods: Clinical data of 12 children in group G and 15 in group N undergoing CT examination and definitely diagnosed by pathology were retrospectively analyzed. The focal conditions were observed and compared in the two groups, including location, size, boundaries, morphology, enhanced degree and mode, abdominal vascular involvement, presence or absence of spanning the midline, infiltration of peripheral organs, angiography manifestations in tumors or surroundings, presence or absence of calcification and vascular tumor emboli as well as metastases of distal organs and lymph nodes. Results: In group N, the incidence of tumors in the adrenal area was conspicuously higher than in group G (P<0.05), while that of tumors with regular morphology and clear boundaries was significantly lower than in group G (P<0.01); Angiography manifestation rate and incidences of vascular embedding, lymph node metastasis, infiltration and organic metastasis in group N were all markedly higher than in group G (P<0.05). There was no statistical significance between the two groups in terms of focal size, presence or absence of calcification and spanning the midline, and enhanced degree and mode, as well as vascular tumor emboli (P>0.05). Conclusions: Mostly located in adrenal areas and with vascular embedding as a primary manifestation, the neuroblastoma extremely readily metastases to lymph nodes and other organs as well as infiltrating local tissues, with dilation on angiography frequent in or around the tumors. With vascular displacement as a primary manifestation, ganglioneuroblastoma has a regular morphology and clear boundaries.

Joint Uplink and Downlink Resource Allocation in Data and Energy Integrated Communication Networks

( Qin Yu ),( Kesi Lv ),( Jie Hu ),( Kun Yang ),( Xuemin Hong ) 한국인터넷정보학회 2017 KSII Transactions on Internet and Information Syst Vol.11 No.6

In this paper, we propose a joint power control strategy for both the uplink and downlink transmission by considering the energy requirements of the user equipments` uplink data transmissions in data and energy integrated communication networks (DEINs). In DEINs, the base station (BS) adopts the power splitting (PS) aided simultaneous wireless information and power transfer (SWIPT) technique in the downlink (DL) transmissions, while the user equipments (UEs) carry out their own uplink (UL) transmissions by exploiting the energy harvested during the BS`s DL transmissions. In our DEIN model, there are UEs served by the BS in order to fulfil both of their DL and UL transmissions. The orthogonal frequency division multiple access (OFDMA) technique is adopted for supporting the simultaneous transmissions of multiple UEs. Furthermore, a transmission frame is divided into time slots in the medium access control (MAC) layer. The mathematical model is established for maximizing the sum-throughput of the UEs` DL transmissions and for ensuring their fairness during a single transmission frame , respectively. In order to achieve these goals, in each transmission frame T, we optimally allocate the BS`s power for each subcarrier and the PS factor for each UE during a specific time slot. The original optimisation problems are transformed into convex forms, which can be perfectly solved by convex optimisation theories. Our numerical results compare the optimal results by conceiving the objective of maximising the sum-throughput and those by conceiving the objective of maximising the fair-throughput. Furthermore, our numerical results also reveal the inherent tradeoff between the DL and the UL transmissions.

An improved Corten-Dolan’s model based on damage and stress state effects

Huiying Gao,Hong-Zhong Huang,Zhiqiang Lv,Fang-Jun Zuo,Hai-Kun Wang 대한기계학회 2015 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.29 No.8

The value of exponent d in Corten-Dolan’s model is generally considered to be a constant. Nonetheless, the results predicted on thebasis of this statement deviate significantly from the real values. In consideration of the effects of damage and stress state on fatigue lifeprediction, Corten-Dolan’s model is improved by redefining the exponent d used in the traditional model. The improved model performsbetter than the traditional one with respect to the demonstration of a fatigue failure mechanism. Predictions of fatigue life on thebasis of investigations into three metallic specimens indicate that the errors caused by the improved model are significantly smaller thanthose induced by the traditional model. Meanwhile, predictions derived according to the improved model fall into a narrower dispersionzone than those made as per Miner’s rule and the traditional model. This finding suggests that the proposed model improves the life predictionaccuracy of the other two models. The predictions obtained using the improved Corten-Dolan’s model differ slightly from thosederived according to a model proposed in previous literature; a few life predictions obtained on the basis of the former are more accuratethan those derived according to the latter. Therefore, the improved model proposed in this paper is proven to be rational and reliable giventhe proven validity of the existing model. Therefore, the improved model can be feasibly and credibly applied to damage accumulationand fatigue life prediction to some extent.

Separation of valuable metals from mixed cathode materials of spent lithium-ion batteries by single-stage extraction

Yongjie Li,Qiang Fu,Hongyun Qin,Kun Yang,Junnan Lv,Qicheng Zhang,Zhang Hui,Feng Liu,Xia Chen,Ming Wang 한국화학공학회 2021 Korean Journal of Chemical Engineering Vol.38 No.10

With the intensity of resource scarcities and environmental problems, the disposal and recovery of spent lithium-ion batteries, especially recovery of valuable metals, becomes vital. In this work, a method of co-extracting nickel, cobalt, manganese and being separated from lithium by single-stage solvent extraction is proposed. The extraction and separation process of D2EHPA was studied. The effects of extractant concentration, saponification percentage, extraction time and O:A on the extraction efficiency of D2EHPA were systematically studied. Nearly 100% manganese, 94% cobalt and about 90% nickel were co-extracted and separated from lithium using D2EHPA in kerosene by single-stage extraction. The maximum value of separation factors (Ni/Li, Co/Li and Mn/Li) was 13.03, 23.42 and 1904.24. The mathematical model of extraction of four ions was developed by combination of Levenberg-Marquardt method and Universal Global Optimization method. The proposed extraction model accurately fits the experimental data and helps to predict the extraction efficiency of each metal under the corresponding conditions.

Effects of habitat fragmentation on the functional diversity of insects in Thousand Island Lake, China

Tian‐Hao Tu,Ji-Rui WANG,Jian-Qiang GU,Tian-Qi LI,Kun LV,Guo-Xin ZHOU,Zhi-Hong XU 한국곤충학회 2019 Entomological Research Vol.49 No.2

Due to habitat fragmentation, the loss of species diversity has been extensively studied. On the contrary, the effects of habitat fragmentation on functional diversity is still poorly understood. In the Thousand Island Lake, we conducted studies of insect functional diversity on a set of 29 isolated islands. We used 10 functional diversity indices from three aspects (functional richness, functional evenness and functional divergence) to respectively describe functional diversity of insects on sample islands. We found the following results: (i) The functional indices selected could reflect the functional diversity of sample islands and it is further proved that in general, three components of functional diversity were independent of each other; (ii) Sample islands could be divided into two categories, island JSD and the remaining islands; (iii) Functional richness increased with island area and shape index, but had no significant correlation with isolation. Likewise, both functional evenness and functional divergence had no significant correlation with island attributes. The conclusion to emphasize from our research is that: (i) habitat fragmentation reduced the biological functional diversity to some extent, further demonstrating the importance of habitat continuity in biodiversity protection; and (ii) for functional diversity protection of insects in a fragmented landscape, an island which has high approximate shape index values of at least hundred hectare magnitude order has a critical promoting effect.