http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Electric Probe Measurements at Edge Region During H‐Mode Discharges in KSTAR
Bak, J.G.,Oh, Y.S.,Kim, H.S.,Hahn, S.H.,Yoon, S.W.,Jeon, Y.M.,Xiao, W.W.,Ko, W.H.,Kim, W.C.,Kwak, J.G.,Woo, H.J.,Chung, K.S.,the KSTAR project team, WILEY‐VCH Verlag 2013 Contributions to plasma physics Vol.53 No.1
<P><B>Abstract</B></P><P>Electrical probe measurements are carried out at the scrape‐off‐layer (SOL) and divertor regions in order to investigate the characteristics of edge plasmas during H‐mode discharges in the Korea Superconducting Tokamak Advanced Research (KSTAR) device. Radial profiles of plasma parameters such as electron temperature T<SUB><I>e</I></SUB>, plasma density n<SUB><I>e</I></SUB>, and parallel flow velocity v<I><SUB>‖</SUB></I> are measured by using a fast reciprocating Langmuir probe assembly (FRLPA) at the SOL region. From the FRLPA measurements, it is found that the decay length of temperature λ<I><SUB>Te</SUB></I> and that of density λ<I><SUB>ne</SUB></I> are 2 <I>∼</I> 4 cm and 1 <I>∼</I> 3 cm, respectively. The magnitude of v<I><SUB>‖</SUB></I> near the last closed flux surface (LCFS) is 4 <I>∼</I> 15 km/s. The radial flux due to edge turbulence at the SOL region is investigated by using spectra analysis on electrostatic fluctuation levels such as ion saturation current Ĩ<I><SUB>is</SUB></I> and floating potential <TEX>$ \tilde{\rm V}_f$</TEX> obtained from the FRLPA measurement. The value of the flux is estimated as <I>∼</I> 10<SUP>20</SUP> particle m<SUP>−2</SUP> s <SUP>−1</SUP> near the LCFS. The poloidal distribution of the ion saturation current density j<I><SUB>is</SUB></I> is measured by fixed edge Langmuir probe array (ELPA) at the divertor region, and it is found that the positions of strike points from the ELPA measurement agree well with those reconstructed from the EFIT result using magnetic diagnostic data. From the spectrum analysis on the ELPA measurements at the divertor region during edge localized modes (ELMs) control in the H‐mode discharges, it is observed that the magnitude of <TEX>$ \tilde{\rm j}_{is}$</TEX>(<I>ω</I>) near strike point decreases when the ELMs are suppressed or mitigated (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)</P>
Magnetism in Ni-W textured substrates for coated conductors
Song K. J.,Park Y. M.,Yang J. S.,Kim S. W.,Ko R. K.,Kim H. S.,Ha H. S,Oh S. S.,Park C.,Joo J. H.,Kim C. J. The Korea Institute of Applied Superconductivity a 2005 한국초전도저온공학회논문지 Vol.7 No.2
The magnetic properties of a series of both annealed (biaxially textured) and as-rolled (non-textured) Ni-xW alloy tapes with compositions x = 0,1,3, and 5 at.$\%$, were studied. Characterization methods included XRD analyses to investigate the biaxial cube texturing of the annealed Ni-W alloy tapes and studies of the magnetization M for both annealed and as-rolled Ni-W alloy tapes. Both the isothermal mass magnetizations M(H) of a series of samples at different fixed temperatures and M(T) in fixed field, employing a PPMS-9 (Quantum Design), were measured. The Ni-W alloys have shown much reduced ferromagnetism as W-content x increases. Both the saturation magnetization Msat and Curie temperature Tc decrease linearly with W-content x, and both Msat and Tc go to zero at critical concentration of Xc - 9.50 at. $\%$ W.
Song, K.J.,Ko, R.K.,Kim, H.S.,Ha, H.S.,Ha, D.W.,Oh, S.S.,Park, C.,Yoo, S.-I.,Kim, M.W.,Kim, C.J.,Joo, J.H. Institute of Electrical and Electronics Engineers 2007 IEEE transactions on applied superconductivity Vol.17 No.2
<P>The degree of ferromagnetism of Ni-W<SUB>y</SUB> alloys decreases as W-content y increases. Both the saturation magnetization <I>M</I> <SUB>sat</SUB> and Curie temperature <I>T</I> <SUB>c</SUB> decrease linearly with W-content y, and both <I>M</I> <SUB>sat</SUB> and <I>T</I> <SUB>c</SUB> go to zero at critical concentration of y<SUB>c</SUB> ~9.50 at.% W. To compare with Ni-W alloys, the magnetic properties of a series of both as-rolled (non-textured) and annealed (biaxially textured) [Ni<SUB>97at.%</SUB>-W<SUB>3at.%</SUB>]<SUB>100-x</SUB>-Cu<SUB>x</SUB> alloy tapes with compositions x = 0, 1, 3, 5, and 7 at.%, were studied. Characterization methods included XRD analyses to investigate the biaxial texturing of the annealed [Ni-W]-Cu alloy tapes and studies of the magnetization for both as-rolled and annealed [Ni-W]-Cu alloy tapes. Both the isothermal mass magnetizations <I>M</I>(<I>H</I>) of a series of samples at different fixed temperatures and <I>M</I>(<I>T</I>) in fixed field, were measured. The effect of Cu addition on both the saturation magnetization and Curie temperature T<SUB>c</SUB> of the Ni<SUB>97at.%</SUB>-W<SUB>3at.%</SUB> alloy was investigated.</P>
산업 적용을 위한 세라믹소재 적층 제조 소재-공정-장치 기술 개발
고종완(J. W. Ko),김동현(D. H. Kim),김충수(C. S. Kim),하정홍(J. H. Ha),박유진(Y. J. Park) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
최근 3D 프린팅기술은 그 요소기술 발전에 따라 산업적용분야의 확대 및 제조기술로 각광받고 있다. 금속, 고분자 소재를 다루는 3D 프린팅의 경우, 산업에 적용되어 그 적용범위를 확장하고 있다. 반면, 세라믹 소재 3D 프린팅 기술의 경우, 상대적으로 기술 발전속도와 단계에서 금속 및 고분자 소재의 3D 프린팅 기술에 못 미치고 있다. 세라믹은 높은 경도로 인해 가지는 취성과 고온의 열처리가 필요하다는 점 특징이며, 이는 3D 프린팅 기술을 개발할 때 역시 고려되어야 한다. 세라믹 3D 프린팅 기술은 압출방식이나 광조형 방식 위주로 발전해왔다. 이 때 사용되는 소재에는 10-60%의 유기고분자를 함유하고 있어 조형 후 이를 제거하는 디바인딩 과정이 필수적이다. 디바인딩 과정에서 유기고분자의 분해에 의한 가스발생 그리고 이로 인해 발생되는 수축 및 변형 때문에 공정안정성이 매우 낮다. 이를 개선하기 위해 많은 노력을 해왔으나, 산업 적용에 충분할 만큼의 성과는 얻기 어려웠다. 본 연구에서는 이를 해결하고자 유기고분자의 함량을 극히 낮춘(2% 미만) 3D 프린팅용 소재를 개발하고 세라믹의 분율을 높이기 위한 적층 공정 그리고 이를 구현하기 위한 장비를 개발하고자 하였다. 3D 프린팅용 소재에 유기고분자 함량을 낮추기 위해 천연유래고분자인 알긴산을 활용하였으며, 성형을 위해 전이금속이온을 사용한 적층 매커니즘을 구현하였다. 개발소재의 연속적 성형 공정 구현을 위해 건조장치-반응액 도포 장치에 대한 설계를 진행하여 요소 장치를 구현하였다. 향후의 연구에서는 이 요소 장치를 통합하고 모니터링 하기 위한 연구개발을 수행할 예정이다.
Stage IVa 진행성 원발성 간암환자에서 간동맥화학치료에 따른 생존기간과 이에 영향을 미치는 요인 분석
이기명 ( K. M. Lee ),원재한 ( J. H. Won ),김재근 ( J. G. Kim ),고광현 ( G. H. Ko ),김성우 ( S. W. Kim ),김원석 ( W. S. Kim ),박소윤 ( S. Y. Park ),김영수 ( Y. S. Kim ),유병무 ( B. M. Yoo ),함기백 ( K. B. Hahm ),김진홍 ( J. H. Kim ),조 대한소화기학회 2002 대한소화기학회 춘계학술대회 Vol.2002 No.-
<배경> 최근 조기간암의 경우는 여러 치료법이 개발되어 효과가 입증되어 있으나 문맥에 혈전을 동반한 진행성 간암 환자의 경우 국소적 치료법으로는 치료 효과를 기대할 수 없고 간동맥화학색전술을 시행할 경우 간부전 등의 심대한 합병증의 위험이 높다. 최근 대퇴동맥을 경유하여 간동맥에 카세타를 유치시킨 후 항암제를 투여하여 간동맥 화학치료법으로 진행성 간암환자의 치료에 이용하여 현저한 효과가 있다는 보고가 있다. 그러나 일부에서는 간동맥화학치료로서 진행성 간