http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Thickness Effect on Compressive Fatigue Behavior of Al-Si-Ca Alloy Foam
Ilhyun Kim(김일현),Mynul Hossain(마이눌),Amkee Kim(김엄기) 대한기계학회 2007 대한기계학회 춘추학술대회 Vol.2007 No.5
The compressive fatigue tests on the closed cell Al-Si-Ca alloy foams with two different thicknesses were performed using a load ratio of 0.1. The quasi-static and cyclic compressive behaviors were obtained respectively. The fatigue stress-life (S-N) curves were evaluated from the obtained cyclic compressive behaviors. S-N curves were presented for the onset of progressive shortening. It turned out that the fatigue strength showed higher value for the thicker foam and the onset of shortening of thinner foam took place earlier. The crushing was found to initiate in a single band which broadens gradually with additional fatigue cycles. Progressive shortening of the specimen took place due to a combination of low cycle fatigue failure and cyclic ratcheting.
MOLECULAR DYNAMICS SIMULATION OF INDENTATION ON SILVER COATED COPPER NANOSTRUCTURE
Amkee Kim,Long Trandinh,Ilhyun Kim 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.11
The effect of misfit on the indentation behaviour of silver coated copper multilayer was studied by molecular dynamics simulation. It was found that the misfit bands on interface formed by the mismatch of lattice structure between copper and silver in slip direction [110] and the dislocation band width depended on the mismatched lattice constants of materials. More dislocations were created and glided by indentation, which created a “four-wing flower” structure consisting of pile?up of dislocation at the interface. The size of “flower” depended on the thickness of silver layer. The critical thickness for “flower” was approximately 4nm above which the “flower” disappeared. As the result, deformation mechanisms such as dislocation pile-up, dislocation cross-slip and movement of misfit dislocation were revealed. Only silver atoms in the dislocation pile-up were involved in the creation of the “flower” while the dislocations in copper were glided in slip direction on interface.
공공시설의 복합화를 통한 학교이전적지 재생 방안에 관한 계획연구
김다래(Kim Da-Rae),김일현(Kim IlHyun) 대한건축학회 2011 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.31 No.2(계획계)
One of the most important issue in the contemporary city regard urban renewal and architectural renovation. This study aims on focus on the phenomenon of facility relocation specifically on Sudo girls’ high school in Yongsan district, Through critical study on the current masterplan. This study intends to propose an alternative urban development of public facilities, preserving historically important building within complex public facilities.
Lower Control Arm 열연강 용접부의 피로수명
김일현(Ilhyun Kim),김엄기(Amkee Kim),이상훈(Sang-hoon Lee),강우종(Woo-jong Kang) 한국자동차공학회 2008 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
The objective of this study is to provide the input data for the prediction of life time of welded automotive suspension components. The welded SAPH 440 specimens were machined for the tensile and fatigue tests. The tensile and fatigue strengths were measured. As result, the fatigue strength of welded specimen turned out to be much lower than that of SAPH 440 without weldment. The fatigue fracture occurred at the heat affected zone along the welding line. In addition, stress-life (S-N) curve in terms of an equivalent stress along the welding line identified with S-N curve under uniaxial load.
배일현(Bae Ilhyun),김영(Kim Young),요시모토 코지(Yoshimoto Koji),김장현(Kim Janghyun) 한국유통학회 2010 한국유통학회 학술대회 발표논문집 Vol.2010 No.11
최근까지 국내 유통산업 성장의 주도적인 역할을 담당해 온 대형할인마트 시장이 점차 업체들간의 치열한 출점경쟁에 따른 내수시장의 포화상태 및 수명주기단축 등 성장의 한계에 다다르게 되었다. 이러한 국내시장의 한계에 따라 대형할인마트들은 생존과 성장을 위해 해외 신규매장 진출, 혹은 해외 유통체인 인수, 그리고 단순 글로벌 출점뿐만 아니라 글로벌 소싱전략 등을 통한 다양한 해외시장 진출전략과 마케팅 전략을 시도하고 있는 상황이다. 기존에는 유통선진국의 글로벌 기업들이 상대적으로 후진국인 아시아지역 국가들에 선도적인 지위를 차지하며 진출을 해왔지만 1980년대 후반 이후 아시아 경제가 급성장하게 되면서 일본과 같은 동아시아 유통기업들의 아시아시장 진출이 시도되기 시작하였다. 중국을 필두로 해서 경제발전 속도에 비해 유통서비스산업 등이 상대적으로 선진화되지 못한 아시아시장은 서구선진국 글로벌 유통기업뿐만 아니라 일본, 한국 등 동아시아 국가들이 내수시장의 한계를 극복하기 위한 탈출구로써 활발하게 진출이 행해지고 있는 시장이다. 이미 많은 유통기업들이 중국 등 아시아시장 진출과정에서 다양한 이유로 인해 성공과 실패를 경험하였다. 유통산업, 특히 대형할인마트의 아시아시장 진출에 있어서 상대적으로 후발국가라고 할 수 있는 우리나라의 경우, 해외진출의 원인과 가정이 우리와 유사한 일본 대형할인마트의 해외진출 사례와 전략을 살펴보고 이를 통해 우리나라 대형할인마트의 성공적인 해외 진출을 위한 전략적 시사점을 찾아보고자 하였다.