풍화암에 근입된 영구 앵커의 극한인발력

유남재,박병수,정길수,김진황 江原大學校 産業技術硏究所 2001 産業技術硏究 Vol.21 No.B

The purpose of this study is to estimate ultimate uplift capacity of permanent anchor which was cast into weathered rock. The ultimate uplift capacity was estimated from the load-displacement curve of four different anchors which have different bond length. The creep test was performed for 15minutes under the maximum load of each step in order to understand the load-transfer property of permanent anchor and to decide which anchor to choose. The destruction range of soil due to the changes in load was estimated by installing dial gauge on the ground which was cast into the weathered rock. Ultimately, the study on the behavior of the anchor case into the weathered rock was performed by comparing and analyzing the estimated result of the UUC obtained by the full scale pull out test in the field with the exsting theoretical and practical results of soil and rock anchor.

지대치 재료의 환경변화에 따른 물리적 성질에 관한 연구

황유숙,최경규,박상진 大韓齒科保存學會 2005 Restorative Dentistry & Endodontics Vol.30 No.2

The purpose of this study was to measure the flexural strength and hardness of four core materials in 4 different medias and to evaluate the relationship between the physical properties. For the flexural strength, the specimens were prepared from each of the following materials: Bisfil Core, Core Max, Fuji IX GP, Miracle Mix and randomly divided into four groups and stored at 37 degree C in the following medias: distilled water for 24 hours (DW/1), distilled water for 30 days (DW/30). 2%NaF for 30 days (NF/30), 0.02N lactic acid for 30 days (LA/30). After storage, the specimens were subjected to flexural strength testing and calculated to flexural modulus. For hardness testing, specimens were prepared from four materials and storaged in the uniform way. After storage, the specimens were subjected to Vicker's hardness testing. 1. The flexural strength of Core Max were the highest, and the flexural strength of Miracle Mix were the lowest. 2. The hardness of Bisfil Core were the highest. 3. The hardness of Core Max were the highest. 4. The hardness of Miracle Mix were the lowest. 5. 2%NaF and 0.02N lactic acid negatively affected the flexural strength and hardness of four core materials. 비금속 지대치 재료의 구강 내 환경변화에 따른 물리적 성질을 구명하기 위하여 4종의 지대치 재료를 다양한 환경에 보관한 후 굴곡강도 및 표면경도의 변화를 관찰하여 조건에 따른 영향을 구명하고자 이 연구를 시행하였다. Bisfil Core, Core Max, Fuji IX GP, Miracle Mix를 사용하여 굴곡강도 측정을 위한 시편을 제작한 후 최대하중을 측정하여 굴곡강도와 굴곡탄성계수를 계산하였다. 표면경도 측정을 위하여 아크릴릭 레진블럭에 상기 4종의 재료를 충전하여 중합시킨 후 순차 연마하여 경도측정을 위한 시편을 제작하고 Vickers hardness를 계산하였다. 1. 굴곡강도는 Core Max에서 가장 높고 Miracle Mix에서 가장 낮았다. 2. 37℃ 증류수에 24시간 보관한 군에서 Bisfil Core가 경도가 가장 높았다. 3. 30일 저장군에서는 Core Max가 경도가 가장 높았다. 4. 모든 군에서 Miracle Mix가 가장 낮은 경도를 나타냈다. 5. 2% NaF용액과 0.02N lactic acid용액은 증류수보다 지대치 재료의 굴곡강도와 표면경도를 저하시켰다.

水稻의 適正 用水量 算定에 關한 硏究 : 葉水面 蒸發量을 中心으로 For Amount of Evapotranspiration

黃龍鎭,宋錫銀,鄭鳳守,朴魯奭,李裕根,李永日,黃光性 진주산업대학교 1976 論文集 Vol.14 No.-

1. 試驗기간의 氣象現況은 Table 1과 같다. 2. 벼의 엽면증발량은 活着後 점차 增加하여 第8기에 Peak로 되며 이때의 1日 엽면 증발량은 5.16mm/day로 되었다가 점차 減少現象을 보인다. 3. 엽면증발량은 第8期에 全 葉面증발량의 17.5%에 達한다. 4 벼의 증산비는 282이였다. 5. 株間수면증발량은 Table 3과 같으며 葉面증발량과는 負(一)의 相關關係가 있음을 보였다. 6. 증발계증발량과 엽수면증발량과의 比는 1.43이였다. 7. 증발계증발량과 葉面증발량과의 비는 0.89이였다. 8. Blaney- Criddle method에 依한 k値는 Table 5와 같다. 9. 증산强度는 총계 1021로, 증발산强度는 총계 1141.8로 나타났다. The resuts of the study on consumption use of irrigated water in pabdy field during the growing stage of gaddy rice are summarized as follow. 1. Amount of transpiration of paddy rice increases gradually after trasplantation and reaches peak on 8th growing period and amount of traspiration reached on 5.16mm/day, then it decreases gradual1y after that. 2. Trnspirstion reached l7. 5% of amount of transpiration at 8th growing period. 3. Transdiration ratio of paddy rice approximate1y 262. 4. As we know from Fig. 2 correlation between the amouut of everporation from water surface in paddy field and amount of trans piration shows high negative. 5. Ratio of between evaportion and evapotranspiration is 1.43. 6. Ratio of between evaportion and transpiration is 0.89. 7. The k value of Blaney-Cliddle methed shows Tab1e 6. 8. Transpion and evaoptranspiration intennsities is each other 1021 and 1141.8.本 試驗은 엽수면증발량 株間수면증발량을 實測하였으며 이 試驗에 여러 가지 未備한 点이 있는 것으로 思料되나 以上의 試驗結果를 要約하면 다음과 같다.

IMF에 관련된 경제적 스트레스가 정신 건강에 미치는 영향

유희정,황성훈,홍진표,김헌수,이철,한오수 大韓神經精神醫學會 2000 신경정신의학 Vol.39 No.1

본 연구는 IMF에 관련된 경제적 스트레스가 정신 건강에 미치는 영향과 그 과정을 밝히기 위해 설계되었다. 스트레스 과정에 관여하는 요인으로 사회적 지지와 문제 해결 양식, 그리고 무망감을 도입했으며, 이들에 의해 스트레스의 영향이 매개되는지를 검증하였다. 경제적 스트레스의 수준에 따라 표집된 221명의 일반인들을 대상으로 우울, 불안, 신체화, 적대감, 사회적 지지, 그리고 문제 해결 양식 등을 측정하였다. 가정한 대로 실직으로 대표되는 경제적 스트레스는 정신 건강에 부정적 영향을 미치는 것으로 나타났다. 그 구체적인 양상을 살펴보면 다음과 같다. 먼저, 사회적 지지는, 높은 스트레스 조건에서 증상의 발현을 억제하는 완충 효과가 있음이 입증되었다. 두번째로, 남성이 여성에 비해 경제적 스트레스의 부정적 영향에 더 취약한 것으로 나타났다. 세번째, 경제적 스트레스는 문제 해결 양식의 다양한 구성요소중 문제 해결에 대한 무기력감에만 영향을 미치는 것으로 나타났다. 네번째, 무망감은 경제적 스트레스와 정신 건강간의 관계를 매개하는 변인임이 인과모형 검증을 통해 확인되었다. 끝으로, 이러한 결과가 스트레스 개입 프로그램 개발을 위한 이론적 기초를 제공한다는 의의가 있음을 논의 했고, 본 연구의 몇 가지 한계점을 지적하였다. This study was designed to investigate the influence of the so-called IMF-related economic stress upon the mental health and to analyze the process of the influence. As the possible variables moderating the stress process, social resource, problem solving style, and hopelessness were included. 221 male and female subjects were recruited according to the intensity of economic stress and classified into four groups(employees of solid companies, employees of the companies at risk, short-term unemployed and long-term unemployed). Relevant measures including economic stress scale, selected SCL-90R subscales(somatization, depression, hostility, anxiety), social support scale, problem-solving scale, and job hopelessness scale were administered. As assumed, it was proved that economic stress had adverse effects on the mental health. In addition to this basic causal relationship, moderating effects of several variables were found as follows: First, social support had the buffering effect upon the economic stress. That is, strong social support played the role suppressing the development of psychiatric symptoms under high stress. Second, men were more vulnerable to the adverse effects of economic stresses than women. Third, economic stresses had influence on the helplessness concerning the problem solving. However other problem solving strategies such as creative style, approach style, avoidance style, etc were proven to have no relationship with the economic stress. Fourth, in the analysis of unemployed group, it was found that hopelessness mediates the relationship between economic stress and mental health. In conclusion, the clinical implications of such findings in economic stress process were discussed and several limitations and the suggestions for future researches were also addressed.

김치저장성 향상을 위한 동결방법이 배추조직의 물성변화에 미치는 영향

양진한,박소희,유진현,임호수,조재선,황성연 한국식생활문화학회 2003 韓國食生活文化學會誌 Vol.18 No.2

김치를 10˚C에서 8일간 숙성시켜 산도 0.6~0.7%로 숙성된 김치를 -70˚C와 -20˚C로 냉동하며 -20˚C에서 저장하면서 배추 조직의 elasticity, hardness, 세포 조직의 변화, 드립양을 실험한 결과는 다음과 같다. -70˚C에서 급속 동결한 것과 -20˚C에서 완만 동결한 냉동 김치 중 배추조직의 elasticity는 냉동 저장 15일까지 감소하다 일정하게 유지되었고 hardness는 거의 변화가 없었으며 냉동 방법에 따른 변화도 거의 나타나지 않았다. 투과 전자현미경으로 관찰한 결과 control의 경우 세포벽이 매우 두꺼우며 세포의 모양들이 잘 보존되어 잇는 것을 볼 수 있었고 -20˚C로 냉동 처리하여 해동시킨 세포벽들은 많이 손상되어 있음을 볼 수 있었으며 -70˚C로 급속 냉동시료의 경우 세포벽의 손상 정도가 -20˚C로 냉동 처리한 시료보다 덜 파괴되어 있음을 볼 수 있었다.한편 냉동 저장기간 동안 드립의 손실량의 변화는 -70˚C로 냉동 처리한 시료의 드립양은 3~4%정도로 -20˚C로 냉동 처리한 시료의 5~6%에 비해 적은 것을 알 수 있었다. This study was conducted to investigate the effect of freezing methods, show freezing at -20℃ and rapid freezing at -70℃, on physical properties of Chinese cabbage in frozen Kimchi during storage at -20℃. Elasticity of midrib of Chinese cabbage in frozen Kimchi was decreased until 15 days and did not changed thereafter during storage at -20℃, Hardness of that was not changed during storage. Those results of elasticity and hardness of slow frozen sample are similar to rapid frozen sample. By the morphological observation through transmission electron microscope, more of cellular structure of Chinese cabbage in slow frozen was destructed than that of rapid frozen sample. Drip loss was more in slow frozen sample than that in rapid one.

接地境界層內의 諸 擴散係數와 大氣安定度에 關하여

金有根,黃水鎭 부산대학교 환경문제 연구소 1985 環境硏究報 Vol.3 No.-

In order to study on effects of stability on diffusion coefficients which concerned with diffusion of pollutant in the surface boundary layer, we carried out the field observation on bare soil surface at the University of Tsukuba in August,1983. The results can be summarized as follows: 1.On the estimation of sensible heat coefficient, it should be taken stability into account. If it were not for taken, the sensibie heat diffusion coefficients are two or three times smaller than the real one. 2.As it shows high frequency of low value of stability parameter ζthrough the observation, the calculation formula of universal function φ(ζ) should be reconsidered. 3.Consequently, the estimated sensible heat flux is somewhat greater than the observed one at the unstable state. On the other hand,it show good coincidence each other at the stable and neutral state.

한국의 C형간염바이러스 RNA 양성인 간질환자 및 건강 공혈자에서의 C형간염바이러스 유전자형의 분포양상

이진경,홍석일,황유성,이선호,민원기,성영철,이동순 대한임상병리학회 1996 대한임상병리학회지 Vol.16 No.4

순차적 크리깅기법을 이용한 미소혼합기의 최적화

박재용,유진식,황승민,임민규,오영규,김용대,한석영,맹주성 한국공작기계학회 2008 한국공작기계학회 추계학술대회논문집 Vol.2008 No.-

An active micro-mixer, which is composed of an oscillating micro-stirrer in the micro-channel to provide effective mixing was optimized. The effects of molecular diffusion and disturbance by the stirrer were considered with regard to two types of mixer models: the simple straight micro-channel and micro-channel with an oscillating stirrer. Two types of mixer models were studied by analyzing mixing behaviors such as their interaction after the stirrer. The mixing was calculated by Lattice Boltzmann methods using the D2Q9 model. In this study, the time-averaged mixing index formula was used to estimate the mixing performance of time-dependent flow. The mixing indices of the two models were compared. From the results, it was found that the mixer with an oscillating stirrer was much more enhanced' and stabilized. Therefore, an approximate optimization of an active micro-mixer with an oscillating stirrer was performed using Kriging method with OLHD (Optimal Latin Hypercube Design) in order to determine the optimal design variables. The design parameters were established as the frequency, the length and the angle of the stirrer. The optimal values were obtained as 1.5754, 0.803D and ±45°, respectively. It was found that the mixing index of the optimal design increased by 83.36% compared with that of the original design.

대형경유차 저공해기술 적용에 따른 나노입자 배출특성

임철수,류정호,엄명도,황진우,김예은 한국대기환경학회 2004 한국대기환경학회지 Vol.20 No.2

Diesel engines which emit a lot of PM and NOx have been known as a main air polluter. Especially, diesel particulate matters (DPM) including black smoke are hazardous air pollutants to human health and environment. The nations retaining advanced engine technologies have reinforced emission regulations. To meet these regulations diesel engine manufacturers have developed low-emission diesel engines, aftertreatment equipments, alternative fuel technologies and so on. In this study, particle number concentrations characteristics according to particle size and engine driving conditions were analyzed when these low-emission technologies were applied. There was a tendency of increasing particle number concentrations from heavy-duty diesel engines with increasing engine rpm and load rate. In the cases of CDPF (Catalytic Diesel Particulate Filter), CNG (Compressed Natural Gas) engine and ULSD (Ultra Low Sulfur Diesel) more than 99% of particle number concentration were removed.

Binding Energy of Oxigen and Methane Adsorbed on Bundles of Open-Ended Single-Wall Carbon Nanotubes

서주연,유대황,곽진성,황윤회,김형국 부산대학교 유전체물성연구소 2004 유전체 논문집 Vol.3 No.

The adsorption of oxygen and methane on the bundles of open-ended single wall carbon nanotube(SWNT) was studied using the volumetric adsorption qst was obtained from the adsorption isotherm measurements performed at different temperatures. The trend in the values of the methane isosteric heat of adsorption showed three regions, representative of the adsorption on the different types of adsorption sites. In case of oxygen, on the other hand, such distinguishable regions were not appeared in the N-qst graph. From the results of qst the binding energies of oxygen and methane adsorbed on open-ended SWITs were estimated.