http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Process analysis and test of manufacturing of sleeve spring-type torsional vibration damper
Hwang, Beom-Cheol,Bae, Won-Byong,Kim, Chul 대한기계학회 2010 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.24 No.6
In diesel engines, engine torque fluctuation inevitably produces torsional vibration. A sleeve spring-type damper commonly is used to reduce this vibration. In this paper, closed form equations to predict the spring constant of a sleeve spring and the torsional characteristics of a torsional vibration damper are proposed for calculation of the stiffness of the damper. The equations were verified through finite element analysis (FEA) and experiments. In addition, the stability of the sleeve spring-type torsional vibration damper was verified in an analysis of the inner star and outer star (the core components of the damper). A two-roll bending process, proposed in this paper, was determined to be the most suitable for manufacture of the sleeve springs. A closed form equation to calculate the forming radius, taking account of the springback effect, was derived, and a FEA method used to analyze the elasto-plastic problem was verified through an analysis of a $90^{\circ}$ bending process. The results of the analysis were in good agreement with the experiment. It is recommended that our proposed method, an advanced technique that can significantly reduce production costs, replace the conventional forming process.
A Study on the Performance of Pulse Jet Cleaning in High Temperature Filter
Byong-Ryol Kim,Seung-Chul Park,Byoung-Chul Park,Hyun-Jun Cho,Hyoung-Mo Oh,Tae-Won Hwang,Sang-Woon Shin 한국방사성폐기물학회 2005 방사성폐기물학회지 Vol.3 No.1
To evaluate parameters influencing on the dust removal of the High Temperature Filter(HTF) system, a computer simulation of fluid dynamics inside the system had been performed. The results showed that the optimum pulse jet periods were 50ms and 90ms for the 1000mm and 1500mm long filter elements respectively. Dust removal effect was very excellent under the pulse jet pressure of 3 bar. But the distance between the pulse jet nozzle and the venturi of a filter element had no meaningful effect on the performance with the variation from 5mm to 10mm. Compared to the dispersion mode of pulse jet, the collective mode of pulse jet flow was preferable in maintaining the pressure inside the system stable.
Carburization of Iron Using CO-H₂ Gas Mixture
Hwang, Ho-Sun,Chung, Uoo-Chang,Chung, Won-Sub,Cho, Young-Rae,Jung, Byong-Ho,Martin G.P. 대한금속재료학회 2004 METALS AND MATERIALS International Vol.10 No.1
Iron carbides formed on the surface of iron and iron oxide samples at 640℃ in a gas mixture of CO-H₂ were characterized by scanning electron microscopy (SEM), MGssbauer spectroscopy, X-ray diffraction patterns (XRD), and by measuring mass change. The Fe₃C amount of the samples has been quantitatively evaluated by the weight change during carburization. While Fe₂O₃ powder was mostly completed to Fe₃C in the early stage, within 5 min after reduction reactions, the conversion of Fe powder sample to Fe₃C (iron carbide) was almost finished after 10 min. The carburization rate of a Fe sheet was very slow and intermediate products (Fe₂C, Fe₃C₂) were observed. This phenomenon is largely due to the difficulty of carbon diffusion into its dense surface. It was found that the carburization rate was affected by change of surface conditions and surface area by reduction, degradation, and cracks at high temperature. This study should help provide a fundamental understanding of carburization in the field of iron-making and suggest a direction for its further development.
조병욱 ( Byong Wook Cho ),윤욱 ( Uk Yun ),이병대 ( Byeong Dae Lee ),송원경 ( Won Kyong Song ),황재홍 ( Jae Hong Hwang ),추창오 ( Chang Oh Choo ) 대한지질공학회 2011 지질공학 Vol.21 No.2
독도에서 지하수가 유일하게 산출되는 서도 물골 지하수의 유출 특성을 파악하기 위하여 지하수 충전 기구 해석, 5회의 유출량과 전기전도도(EC)를 측정하였다. 물골 지하수는 물골 상류에 내린 강수가 조면안산암와 조면암에 발달한 냉각절리를 따라서 하류로 이동하다가 물골의 동굴에 이르러 유출되는 것으로 해석된다. 물골 지하수의 유출량은 1.12~7.02 m3/d이고 EC는 2,650~3,390 μS/cm로 변화가 적은편이나 강수량이 많으면 일시적으로 EC가 상승한다. 이와 같은 물골 지하수의 유출량과 EC의 변화는 물골 상류 지하수 충전 지역과 물골과의 거리가 짧으며 조면안산암와 조면암에 발달한 주상절리를 통한 물골로의 지하수 흐름이 빠르기 때문으로 판단되나 물골 지하수의 유출량 변화 파악을 위해서는 추가 유출량조사와 함께 정확한 강수자료가 요구된다. The discharge characteristics of the Seodo Mulgol Spring-the only groundwater-producing area in Dokdo-were evaluated by measurements of discharge rate and electrical conductivity (EC) on five occasions. The Seodo Mulgol Spring is fed by rainfall in upstream areas of the Mulgol cave, and the rainwater of the area moves down along cooling joints developed in trachyandesite II and trachyte, finally discharging at the Mulgol cave. The discharge rate of the Seodo Mulgol Spring varied from 1.12 to 7.02 m3/d during the study period and EC varied from 2,650 to 3,390 μS/cm, showing a sharp increase during heavy rainfall. The observed variations in discharge rate and EC at the Seodo Mulgol Spring are attributed to the relatively short distance between the recharge area and the Mulgol cave, and to the rapid movement of groundwater through columnar joints developed in trachyandesite II and trachyte. Additional discharge measurements, combined with precise rainfall data, are required at Dokdo to elucidate the discharge characteristics of the Seodo Mulgol Spring.
최원호(Won-Ho Choi),김광신(Kwang-Shin Kim),최병건(Byong-Keon Choi),황승욱(Seung-Wook Hwang),김우리(Woo-Ri Kim),이석진(Seok-Jin Lee),안정현(Jung-Hyun Ahn),신종환(Jong-Hwan Sin) 한국콘텐츠학회 2014 한국콘텐츠학회논문지 Vol.14 No.3
우리나라의 전통주는 막걸리 붐 이후 주춤한 발전을 보이고 있으며, 이에 따라 전통주의 특성을 반영한 술잔을 활용한 명품화 및 세계화 전략을 통한 도약이 필요한 시점이다. 현재까지 우리나라의 전통주 술잔 디자인 개발은 심미성 및 유통 편의성에만 초점을 맞추거나, 디자인 개발의 세분화?고급화?연구화 등의 일시적 발전양상을 보여오긴 하였으나, 전통주의 특성을 기획 단계부터 반영하여 상품화한 사례나 프로세스는 없었다. 따라서 전통주의 특성을 반영한 술잔 디자인 설계 프로세스 기술 수립하는 것이 필요한 상황이다. 본 연구는 전통주의 특성을 감성요소인 오감과 스토리텔링으로 나누어 분석하고, 이들 중 술잔 디자인에 필요한 요소들을 추출하고, 이를 기반으로 전통주 술잔의 형태?소재 같은 시각화하는 관계를 파악하고자 하였다. 이러한 요소 중, 특히 대상 전통주가 갖고 있는 역사나 설화와 같은 스토리텔링을 기반으로 한 술잔의 라벨, 문양, 장식적 요소 등 디자인을 결정하여 해당 전통주의 상품성을 극대화할 수 있는 요소들을 도출할 수 있었다. 이러한 연구결과는 기존 소규모 가양주의 수출이 주춤하고 있는 상황에서 감성요소와 스토리텔링이 있는 전통주의 특성을 살려 경쟁력 있는 술잔 디자인을 개발함으로써 새로운 수출전략을 제공할 수 있을 것으로 기대된다. Korean traditional alcohols growth gets declined after Makgeollis boom and its time to enter the takeoff stage using cup based on the characteristics of each alcohols in order to their globalization and quality improvement. For now, there are 3 features of Korean traditional alcohols cup design development ; subdivision, quality improvement, systematization. However, theres no product design case that reflect the characteristics of the alcohol from the planning phase. Therefore, it needs to establish process technology for storytelling and emotion based cup design. This research aims to extract the specification for cup design and to find out the visualization element of cups shape and material by studying 5 senses and traditional alcohols objective informations. Through the study, the elements that can maximize the specific traditional alcohols marketability: cups label, pattern, decorative element based on the storytelling like history and tale were found. As a result, those result can give a newexport strategy by developing competitive design that has emotional element and storytelling from the traditional alcohols characteristics in a situation of stagnant export of the small sized home-brewed liquor business.
Experimental Determination of the Optimum Blank Shape in Rectangular Cup Drawing
Bae, Won-Byong,Kim, Ho-Yoon,Hwang, Bum-Chul Korean Society for Precision Engineering 2003 International Journal of the Korean Society of Pre Vol.4 No.1
The rectangular deep drawing process is widely used in sheet metal forming, but there are various associated defects, such as earing, wrinkling, tearing, etc. In order to avoid such defects, an optimum blank shape is required. Such an optimum blank shape cannot be generalized because deep drawing processes are involved in complex process parameters. So, it is necessary to do systematic research to determine the optimum blank shape for the deep drawing process. In this study, a rectangular cup drawing test has been carried out to determine the optimum blank shape for various stainless steel sheets. From the test, a new blank model, which has no earing, is propsed.