Territorial Extension of the EU Environmental Law and Its Impacts on Emerging Industrial Economies: A Taiwan Case

Hsing-Hao Wu 이준국제법연구원 2020 China and WTO Review Vol.6 No.2

Design Customization of Respiratory Mask based on 3D Face Anthropometric Data

Chih-Hsing Chu,Szu-Hao Huang,Chih-Kai Yang,Chun-Yang Tseng 한국정밀공학회 2015 International Journal of Precision Engineering and Vol. No.

This study presents a machine learning based method for design customization of a 3D respiratory mask. A parametric model of a3D human face was constructed from an anthropometric database consisting of 495 facial models. An AdaBoost.R algorithm wasapplied to identify a set of measurable parameters most related to the facial geometry. The correlation between parameters wasestimated using principal component analysis and linear regression. With those parameter values as input, the parametric modelgenerates 3D meshes of a human face that serve as a design reference for the construction of a customized respiratory mask of agood fit. We conducted a series of experiments with 10-fold cross-validation to validate the effectiveness of the proposed method.

Geometry Optimization for a Rubber Mount with Desired Stiffness Values in Two Loading Directions Considering Hyperelasticity and Viscoelasticity

Liu Chih-Hsing,Hsu Yi-Yao,Yang Shih-Hao 한국자동차공학회 2021 International journal of automotive technology Vol.22 No.3

Rubber mount is a type of vibration isolator that can absorb vibration and minimize external disturbance. This study proposes an optimization method to design the geometry of a rubber mount to achieve particular stiffness values in two different loading directions. The proposed objective function of the geometry optimization problem is to minimize the error ratios between calculated and target stiffness values in vertical and transverse directions; a weighted sum method is used to combine both error ratios with equal weighting factors. The design variables are the coordinates of some design points which form the cross-section geometry of the rubber mount. A three-dimensional design is then obtained by extrusion of the two-dimensional geometry. Cuckoo search algorithm is used to update the design variables until the objective function value is smaller than a tolerance. Nonlinear finite element analysis is used to estimate the stiffness values of the rubber mount. Both hyperelastic and viscoelastic rubber parameters are numerically identified by fitting to the experimental data. An optimal design of the rubber mount is obtained and prototyped. Experimental tests are performed to validate the design.

In-situ biochar application conserves nutrients while simultaneously mitigating runoff and erosion of an Fe-oxide-enriched tropical soil

Lee, Chia-Hsing,Wang, Chung-Chi,Lin, Huan-Hsuan,Lee, Sang Soo,Tsang, Daniel C.W.,Jien, Shih-Hao,Ok, Yong Sik Elsevier 2018 The Science of the total environment Vol.619 No.-

<P><B>Abstract</B></P> <P>Climate change gives rise to rapid degradation of rural soils in sloping subtropical and tropical areas and might further threaten environmental sustainability. In this study, we conducted an integrated evaluation of the effects of wood biochar (WB) application mixed with a green waste dreg compost (GWC) on runoff quality, soil losses, and agricultural productivity for a highly weathered tropical soil. A conventional agriculture method, in which soils are treated with anionic polyacrylamide (PAM), was also conducted for comparison. The amounts of runoff and soil loss, and nutrient retention were evaluated a year after WB application. Soil fertility was also investigated through a year pot experiment with rape (<I>Brassica campestris</I> L.) cultivation. Our results showed that the WB application not only effectively increased soil pH, soil organic carbon (SOC) and exchangeable K<SUP>+</SUP> but also increased the production of rape plants. Significant reduction of runoff and the increases of inorganic nitrogen (IN) and total phosphorus (TP) were found in the WB-treated soil. Compared to the control, the co-application of WB and GWC, particularly for the WB at 4%, decreased runoff by 16.8%, soil loss by 25%, and IN loss (via runoff) by 41.8%. Meanwhile, compared to the control and PAM treatments, the co-application of WB and GWC improved soil acidity and the contents of SOC, IN, TP, and exchangeable K<SUP>+</SUP>. The co-application of WB and GWC could be an alternative agricultural strategy to obtain benefits to agricultural productivity and environmental sustainability.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Co-applying biochar and compost notably reduced runoff and soil loss by 16%–25% in a tropical soil. </LI> <LI> In-situ biochar applying increased inorganic N, available P and K by 1.5–2.5 times in slopelands. </LI> <LI> Crop productivity was enhanced by biochar applying 1.5–2 times at least in a tropical slopeland. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Initial Factors Influencing Duration of Hospital Stay in Adult Patients With Peritonsillar Abscess

Yu-Hsi Liu,Hsing-Hao Su,Yi-Wen Tsai,Yu-Yi Hou,Kuo-Ping Chang,Chao-Chuan Chi,Ming-Yee Lin,Pi-Hsiung Wu 대한이비인후과학회 2017 Clinical and Experimental Otorhinolaryngology Vol.10 No.1

Objectives. To review cases of peritonsillar abscess and investigate the initial clinical factors that may influence the duration of hospitalization. To determine the predictive factors of prolonged hospital stay in adult patients with peritonsillar abscess. Methods. Subjects were adults hospitalized with peritonsillar abscess. We retrospectively reviewed 377 medical records from 1990 to 2013 in a tertiary medical center in southern Taiwan. The association between clinical characteristics and the length of hospital stay was analyzed with independent t-test, univariate linear regression and multiple linear regression analysis. Results. The mean duration of hospitalization was 6.2±6.0 days. With univariate linear regression, a prolonged hospital stay was associated with several variables, including female gender, older ages, nonsmoking status, diabetes mellitus, hypertension, band forms in white blood cell (WBC) counts, and lower hemoglobin levels. With multiple linear regression analysis, four independent predictors of hospital stay were noted: years of age (P<0.001), history of diabetes mellitus (P<0.001), ratio of band form WBC (P<0.001), and hemoglobin levels (P<0.001). Conclusion. In adult patients with peritonsillar abscess, older ages, history of diabetes mellitus, band forms in WBC counts and lower hemoglobin levels were independent predictors of longer hospitalization.

Characteristics of Reactively Sputtered Niobium Nitride Thin Films as Diffusion Barriers for Cu Metallization

Cheng-Lin Huang,Chih-Huang Lai,Po-Hao Tsai,Hsing-An Huang,Jing-Cheng Lin,Chiapyng Lee 대한금속·재료학회 2013 ELECTRONIC MATERIALS LETTERS Vol.9 No.5

NbN films were prepared by radio frequency reactive magnetron sputtering and then employed as diffusion barriers between Cu and Si. The microstructure of the NbN films was an assembly of very small columnar crystallites with a cubic structure. To investigate the properties as diffusion barriers, we performed metallurgical reactions of Cu/NbN0.8/Si, Cu/Nb/Si and Cu/TaN0.7/Si for comparisons. The sheet resistance increased dramatically after annealing above 750°C for Cu/NbN0.80/Si, and above 500°C for both Cu/Nb/Si and Cu/TaN0.7/Si. The interfaces were deteriorated seriously and formation of Cu3Si was observed when the sheet resistance was significantly increased. The diffusion coefficient of Cu in NbN barrier films was estimated by using the change of resistance (ΔRs/Rs %). Compared with TaN0.7, NbN0.8 films possess larger grain size and lower Cu diffusion coefficient. Our results suggest that the NbN film can be used as a diffusion barrier for Cu metallization as compared to the well-known TaN film.

A Password and Smart Card Based User Authentication Mechanism for Multi-Server Environments

Chun-Ta Li,Cheng-Chi Lee,Hsing Mei,Chia-Hao Yang 보안공학연구지원센터 2012 International Journal of Future Generation Communi Vol.5 No.4

A Smart Manufacturing Solution for Multi-Axis Dispenser Motion Planning in Mixed Production of Shoe Soles

Yuan-Ping Luh,Liao-Chuan Huang,Hao-Jan Lu,Chih-Hsing Chu 한국정밀공학회 2020 International Journal of Precision Engineering and Vol.7 No.3

Mixed production is a practical solution to realize the idea of mass product customization. The production system needs to adapt to raw materials of product variants appearing in the production line, and thus to properly complete the manufacturing task. Such system autonomy is a core competence in smart manufacturing. This paper presents a smart manufacturing solutionfor shoe sole gluing in mixed production environment. The solution automatically guides a 5-axis CNC dispensing machine to perform the gluing task of a sole randomly placed on the worktable without use of fi xturing. A single RGB-D camera is used to capture the color and depth data of the work environment. A two-stage algorithm is implemented to provide the intelligence required by the solution using the captured data as input. The LINEMOD method fi rst determines a rough pose from training data of all shoe soles at pre-defi ned orientations. A trimmed interactive closest point (ICP) method then refi nes the pose using the rough one as the initial solution. Pre-determined working paths are transformed into the correct location around the sole with the refi ned pose. The corresponding motion commands drive the dispenser controller to complete the gluing task without collision. Test results of real shoe soles validate the eff ectiveness of the proposed solution. This work contributes to smart manufacturing in the shoe making industry, which has been less studied in the past.

台灣社區營造之資源盤點及整合模式建立研究

陳亭伊(Ting-Yi Chen),謝杏慧(Hsing-Hui Hsieh),林漢明(Han-Ming Lin),陳怡昌(Yi-Chang Chen),黃招憲(Jau-Hsien Huang),郭殷豪(Yin-Hao Kuo),Hsin-Mien Wang 한국외국어대학교 대만연구센터 2016 대만연구 Vol.- No.9

For the promotion of community development, the first step is to investigate the specialty resources and human resources, to understand the process and the current appearance of community development, and to explore the future development vision or direction should be promoted. Secondly, the local smart people must have the abilities of cooperation, communication, cross-domain integration, and linking external support. It is one of the keypoints of adding-value workforce. Therefore, leaders of a community must find the local characteristics of the championship, and have the capacity to promote citizen participation and to integrate external support and cooperation, so that communities can acquire and integrate diverse and sufficient resources in order to succeed in community sustainability. Therefore, the main purpose of this paper is to establish a model of resource inventory and integration. Through the methods of literature analysis and focus group discussion, this paper explores the community cases of Guantu area in Taipei, Shennong Street and Jingliao community in Tainan how to inventory both natural and human resources, to seek community development and value-added directions, to promote civic participation, cooperation, and to link external groups, so as to achieve the success of internal and external resource integration.

Characteristics and heterostructure of metal-doped TiO2/ZnO nanocatalysts

Chen Wu-Jhang,Hsu Kuo-Chin,Fang Te-Hua,Chen Tao-Hsing,Li Ming-Hao 한국물리학회 2022 Current Applied Physics Vol.38 No.-

In this study, Ag or Al-doped TiO2/ZnO heterostructure nanocatalysts were prepared using a sol-gel method for photocatalysis to evaluate the degradability. The photocatalytic behavior was evaluated by the degradation of methylene blue (MB) under ultraviolet (UV) light irradiation. Photocatalytic studies suggested that 1 mol% Agdoped TiO2/ZnO (TiO2/ZnO = 0.75/0.25) heterostructure nanocatalysts showed higher photocatalytic activity, and that the degradation efficiency can reach 83% in 4 h, 14% higher than that for pure TiO2. Finally, the photocatalysis mechanism for the Ag-doped TiO2/ZnO heterostructure nanocatalysts is discussed.