Factors Affecting Enterprise's Satisfaction toward Social Security's Online Public Service: The Case of Thanh Hoa Province, Vietnam

NGO, Chi Thanh,NGUYEN, Thi Ngoc Mai,NGUYEN, Duy Dat,LE, Hoang Ba Huyen,LE, Van Cuong,LE, Thi Binh Korea Distribution Science Association 2020 The Journal of Asian Finance, Economics and Busine Vol.7 No.9

The study aims to investigate factors affecting enterprise's satisfaction and loyalty toward the Social Security's online public services, looking at the case of Thanh Hoa province, Vietnam. This study employs samples with 216 enterprises that use online public system of Thanh Hoa province's Social Security. The research model is closely linked to the SERVQUAL model developed by Parasuraman, Zeithaml and Berry (1988). We propose 23 scales that constitute the quality of service, three scales that constitute Customer Satisfaction and three components that constitute Customer Loyalty. This study use the tool of Exploratory Factor Analysis (EFA), Cronbach's Alpha test, Confirm Factor Analysis (CFA) and Structural Equation Modeling (SEM) in order to address the question of satisfaction and loyalty. The result shows that the factor with the most impact is Reliability, next is Capacity of staffs, Tangibles, Attitude of staffs, and the least impacting factor is Empathy; moreover, the results also show that Satisfaction has a strong impact on Customer Loyalty. The findings of this study suggest that Thanh Hoa province's Social Security should: (i) strengthen the reliability of online service system; (ii) build capacity for staffs; (iii) develop the responsiveness of electronic transactions systems; and (iv) improve the empathy of staffs.

Three-dimensional simulation of droplet dynamics in planar contraction microchannel

Hoang, Van Thanh,Lim, Jiseok,Byon, Chan,Park, Jang Min Elsevier 2018 Chemical engineering science Vol.176 No.-

<P><B>Abstract</B></P> <P>In droplet-based microfluidic systems, microchannel design plays a primary role in transport and manipulation of liquid droplets. The objective of this paper is to investigate dynamics of a droplet in planar contraction microchannel via three-dimensional numerical simulation and theoretical analysis. In particular, this study characterizes three regimes of the droplet dynamics, namely, trap, squeeze and breakup, depending on capillary number (Ca) and contraction ratio (<I>C</I>). In addition, theoretical models have been proposed to describe transitions from one to another regime as a function of Ca and <I>C</I>. For the transition from trap to squeeze, the critical capillary number (Ca<SUB>Ic</SUB>) was found to follow Ca<SUB>Ic</SUB> = <I>a</I>(<I>C<SUP>M</SUP>−</I>1), whereas the critical capillary number (Ca<SUB>IIc</SUB>) of transition from squeeze to breakup corresponds to Ca<SUB>IIc</SUB> = c<SUB>1</SUB> <I>C</I> <SUP>−1</SUP>. Furthermore, details of the droplet dynamics along downstream of the contraction have been explored as well to depict deformation, retraction and/or breakup of the droplet. The present results would be useful guidelines in designing contraction microfluidic channel for precise control and manipulation of droplets.</P> <P><B>Highlights</B></P> <P> <UL> <LI> The characteristics of three regimes including trap, squeeze and breakup are studied. </LI> <LI> Theoretical models for transitions between each regime are proposed. </LI> <LI> Deformation and retraction of the droplet are investigated. </LI> <LI> A theoretical model to predict steady state position of the droplet is developed. </LI> <LI> Useful guidelines are suggested to design contraction microchannel. </LI> </UL> </P>

Magnetocaloric Effect in La_0.7Ca_0.25Ba_0.05MnO₃ Nanocrystals Exhibiting the Crossover of First- and Second-Order Magnetic Phase Transformation

Thanh, Tran Dang,Linh, Dinh Chi,Van, Hoang Thanh,Ho, Thi Anh,Van Manh, Tien,Bau, Le Viet,Phan, The-Long,Yu, Seng-Cho The Japan Institute of Metals 2015 MATERIALS TRANSACTIONS Vol.56 No.9

Effects of Injection Molding Parameters and their Interactions on Mechanical Properties of PMMA/PC Blend

Hoang, Van Thanh,Luu, Duc Binh,Toan Do, Le Hung,Tran, Ngoc Hai,Nguyen, Pham The Nhan,Tran, Minh Sang,Tran, Minh Thong Materials Research Society of Korea 2020 한국재료학회지 Vol.30 No.12

A combination of Polycarbonate (PC) material and Polymethylmethacrylate (PMMA), fabricated using an injection molding machine, has been investigated to determine its advantages, as studied in Ref. 1). This paper aims to investigate the optimization of PMMA/PC blend for both tensile yield strength and impact strength. Furthermore, interaction effects of process conditions on mechanical properties including tensile yield strength and impact strength of PMMA/PC blend by injection molding process are interpreted in this study. Tensile and impact specimens are designed following ASTM, type V, and are fabricated by injection molding process. The processing conditions such as melt temperature, mold temperature, packing pressure, and cooling time are applied; each factor has three levels. As a result, in comparison with optimization of separated responses, mechanical properties of PMMA/PC are found to decrease when optimizing both tensile and impact strengths simultaneously. The melt temperature is found to be the most significant interaction parameter with the mold temperature and packing pressure. In addition, there is more interaction between the mold temperature and cooling time. This investigation provides a useful understanding of the control of injection molding processing of polymer blends in optical application.

Experimental study on mechanical behaviors of injection molded PC/PMMA blends

Van Thanh Hoang,Quang Bang Tao,Bich-Tram Truong-Le,Minh Sang Tran,Duc Binh Luu 대한기계학회 2021 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.35 No.9

Mechanical property is one of the quite important factors of optical articles. Most of pure plastics materials are rarely found to have both high strength and toughness. The paper aims to investigate mechanical properties of polymethyl methacrylate and polycarbonate (PC/PMMA) blends by means of injection molding process and optimization technique. In this study, four factors including composition, packing pressure, melt temperature, and cooling time are taken into account. Experimental results show that the composition is found as the most significant factor for improving the mechanical properties of PC/PMMA blends with confidence level of 95 %. Meanwhile, melt temperature and cooling time are also the most significant parameters for enhancing impact strength with 95 % confidence level. In addition, the mechanical properties of the PC/PMMA plastics composites have been enhanced significantly. Specifically, average tensile yield strength, impact strength, and average elongation are 76.5 MPa, 7429.5 J/m 2 , and 17.5 mm, respectively.

Advanced Magnetic Materials Produced by Using Rapid Quenching Technology

Nguyen Hoang Nghi,Nguyen Van Dung,Trinh Thi Thanh Nga,Bui Thi Khanh Nhung,Mai Thanh Tung,Nguyen Huu Tinh,Hoang Nhat Hieu,Bui Xuan Chien,Nguyen Thi Hong Tam 한국물리학회 2008 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.52 No.6

Amorphous alloys produced by using a rapid quenching technique are considered to be a precursor for producing nanosized and multiphase structures by precipitation (the top-down method). By using this technique, several new magnetic materials with different magnetic properties based on different physical mechanisms have been manufactured and investigated. Three new magnetic materials, a nanocrystalline soft magnetic material, a soft-hard permanent magnet and a Me-3d granular alloy with a GMR effect, what were prepared under local conditions, are presented and discussed in the experimental point of view. Amorphous alloys produced by using a rapid quenching technique are considered to be a precursor for producing nanosized and multiphase structures by precipitation (the top-down method). By using this technique, several new magnetic materials with different magnetic properties based on different physical mechanisms have been manufactured and investigated. Three new magnetic materials, a nanocrystalline soft magnetic material, a soft-hard permanent magnet and a Me-3d granular alloy with a GMR effect, what were prepared under local conditions, are presented and discussed in the experimental point of view.

Healthcare Workers’ Knowledge and Attitudes Regarding the World Health Organization’s “My 5 Moments for Hand Hygiene”: Evidence From a Vietnamese Central General Hospital

Huy Van Nguyen,Hieu Trung Tran,Long Quynh Khuong,Thanh Van Nguyen,Na Thi Nhi Ho,An Thi Minh Dao,Minh Van Hoang 대한예방의학회 2020 예방의학회지 Vol.53 No.4

Objectives: Although the World Health Organization (WHO) initiative “My 5 Moments for Hand Hygiene” has been lauded as effective in preventing hospital-associated infections, little is known about healthcare workers (HCWs)’ hand hygiene behavior. In this study, we sought to assess knowledge and attitudes towards the concepts in this initiative, as well as associated factors, among Vietnamese HCWs at a general hospital. Methods: A structured questionnaire was administered to HCWs at a central Vietnamese general hospital in 2015. Multiple logistic regression analysis was used to identify factors associated with HCWs’ knowledge and attitudes towards hand hygiene. Results: Of 120 respondents, 65.8% and 67.5% demonstrated appropriate knowledge and a positive attitude, respectively, regarding all 5 hand hygiene moments. Logistic regression indicated better knowledge of hand hygiene in workers who were over 30 years old, who were direct HCWs (rather than managers), who had frequent access to clinical information, and who received their clinical information from training. Those who worked in infectious and tropical disease wards, who had frequent access to clinical information, and who received information from training were more likely to have a positive attitude towards hand hygiene than their counterparts. Conclusions: Although many Vietnamese HCWs displayed moderate knowledge and positive attitudes towards the WHO hand hygiene guidelines, a key gap remained. Regular education and training programs are needed to increase knowledge and to improve attitudes and practices towards hand hygiene. Furthermor

Trends in prediabetes and diabetes prevalence and associated risk factors in Vietnamese adults

That Thanh Ton,Anh Thi Ngoc Tran,Ich Thanh Do,Hoa Nguyen,Thi Thanh Binh Nguyen,Minh Tu Nguyen,Van Anh Bao Ha,Anh Quoc Tran,Huu Khoi Hoang,Binh Thang Tran 한국역학회 2020 Epidemiology and Health Vol.42 No.-

OBJECTIVES: The prevalence of diabetes mellitus is rapidly increasing in Vietnam, particularly among adults aged over 45 years. This study estimated trends in diabetes and prediabetes prevalence and determined risk factors in Vietnamese adults (over 45 years). METHODS: A cross-sectional study was conducted based on data from an annual diabetes screening program among people aged 45-69 years in an urban city in central Vietnam (Da Nang). Joinpoint regression analyses were performed to calculate the annual percentage change and ptrend-values. Multinomial logistic regression analysis was used to determine risk factors. RESULTS: In total, 3,765 men and 9,149 women were included in this analysis. The age-adjusted prevalence of diabetes and prediabetes in 2017 was 11.4% and 52.9%, respectively. The prevalence of diabetes was higher in men (15.1%) than in women (10.3%), but that of prediabetes was similar in both genders (53.4% vs. 52.8%). The prevalence of prediabetes significantly increased during the study period, whereas no upward or downward trend for diabetes was observed. The prevalence of obesity, abdominal obesity, hypertension, and dyslipidemia showed no obvious trend. Obesity, a high waist-to-hip ratio, hypertension, more severe abdominal obesity, and dyslipidemia were significantly associated with a higher risk of diabetes and prediabetes. CONCLUSIONS: Diabetes and prediabetes were more prevalent among people aged over 45 years than in the general population. Da Nang has experienced a marked increase in the prevalence of prediabetes. These findings have significant implications regarding the need for nationwide public health interventions and management aiming at diabetes prevention and control.

Outcomes of laparoscopic choledochotomy using cholangioscopy via percutaneous-choledochal tube for the treatment of hepatolithiasis and choledocholithiasis: A preliminary Vietnamese study

Loi Van Le,Quang Van Vu,Thanh Van Le,Hieu Trung Le,Khue Kim Dang,Tuan Ngoc Vu,Anh Hoang Ngoc Nguyen,Thang Manh Tran 한국간담췌외과학회 2024 Annals of hepato-biliary-pancreatic surgery Vol.28 No.1

Backgrounds/Aims: Hepatolithiasis and choledocholithiasis are frequent pathologies and unfortunately, with the current treatment strategies, the recurrence incidence is still high. This study aimed to assess the outcomes of laparoscopic choledochotomy using cholangioscopy via the percutaneous-choledochal tube for the treatment of hepatolithiasis and choledocholithiasis in Vietnamese patients. Methods: A cross-sectional study of patients with hepatolithiasis and/or choledocholithiasis who underwent laparoscopic choledochotomy using intraoperative cholangioscopy via percutaneous-choledochal tube at the Department of Hepatopancreatobiliary Surgery, 108 Military Central Hospital, from June 2017 to March 2020. Results: A total of 84 patients were analyzed. Most patients were females (56.0%) with a median age of 55.56 years. Among them, 41.8% of patients had previous abdominal operations, with 33.4% having choledochotomy. All patients underwent successful laparoscopic common bile duct exploration followed by T-tube drainage without needing to convert to open surgery. Most patients (64.3%) had both intrahepatic and extrahepatic stones. The rate of stones ≥ 10 mm in diameter was 64.3%. Biliary strictures were observed in 19.1% of patients during cholangioscopy. Complete removal of stones was achieved in 54.8% of patients. Intraoperative complications were encountered in two patients, but there was no need to change the strategy. The mean operating time was 121.85 ± 30.47 minutes. The early postoperative complication rate was 9.6%, and all patients were managed conservatively. The residual stones were removed through the T-tube tract by subsequent choledochoscopy in 34/38 patients, so the total success rate was 95.2%. Conclusions: Laparoscopic choledochotomy combined with cholangioscopy through the percutaneous-choledochal tube is a safe and effective strategy for hepatolithiasis and/or choledocholithiasis, even in patients with a previous choledochotomy.

Brand Anthropomorphism, Brand Reputation, and Consumer Engagement in the Distribution of Smartphone Brands

Ngoc Dan Thanh NGUYEN(Ngoc Dan Thanh NGUYEN ),Trong Phuc NGO(Trong Phuc NGO ),Ngoc Van MAI(Ngoc Van MAI ),Kim Ngan TRA(Kim Ngan TRA ),Tran Huy Hoang LE(Tran Huy Hoang LE ) 한국유통과학회 2023 유통과학연구 Vol.21 No.4

Purpose: This study aims to analyze the impact of Brand Anthropomorphism and Intimacy on Brand Engagement, and at the same time analyze the regulatory effect of Brand Reputation on the relationship between Brand Anthropomorphism and Intimacy and the relationship between Intimacy and Brand Engagement in terms of distribution brand. Results: The findings show that Brand Anthropomorphism, Intimacy, and Brand Reputation are important value factors in customers’ minds toward their behavior, and from there, they will contribute to creating positive emotions and interactions between consumers and brands. Research design, data, and methodology: This article used the quantitative technique utilizing PLS-SEM software to test the hypothesis with 1,060 samples. Collected data shows that consumers in Ho Chi Minh City have positive emotions and interactive and social behaviors toward smartphone brands. Conclusion: The study has demonstrated the conclusions and proposed solutions to help smartphone brands build Brand Anthropomorphism while enhancing Brand Reputation thereby achieving Intimacy, which leads to consumer Brand Engagement. In addition, this study complements the concept of Brand Anthropomorphism which is lacking in theoretical background and is the first study in Vietnam to explore the prefixes and suffixes of the concept of Brand Anthropomorphism and the regulatory role of Brand Reputation.