Effects of Quenching Methods and Aging Processes on the Crushing Properties and Microstructure of Al–Zn–Mg Alloy Thin-Walled Square Extrusions

Hui Guo,Jin Zhang,Cheng Wang,Yun‑lai Deng 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.8

In this study, the effects of different (online quenching and offline quenching) quenching methods and aging processes (T6and T73) on the crashworthiness and microstructural evolution of three Al–Zn–Mg alloys (G1–G3) were studied by conductingtensile test and axial compression tests at room temperature, combined with optical metallography, electron back scattereddiffraction, and transmission electron microscopy microstructural observations. The obtained results revealed that thecrushing properties of three different Al–Zn–Mg alloys subjected to different quenching methods and aging processes weresignificantly different. Their crushing energy absorption of are ranked as follows: G1 > G3 > G2. The highest total energyabsorption gap (between T6 and T73) is the G1 alloy, and the lowest one is the G3 alloy. The largest total energy absorptiongap between the two quenching methods is the G3 alloy, and the smallest one is the G1 alloy. The G2 alloy with the largesttotal amount of Zn + Mg has the highest number density of matrix precipitates, the largest precipitate gap (between T6 andT73) and the smallest precipitate gap between the two quenching methods. The G3 alloy with the largest Zn/Mg ratio hasthe smallest number density of matrix precipitates, the minimum precipitation gap (between T6 and T73) and the maximumprecipitation gap between the two quenching methods. The G1 alloy with the lowest Zn/Mg ratio has the smallest size ofgrain boundary precipitates and PFZ width, while their largest values are obtained for the G3 alloy with the maximum Zn/Mg ratio. As a crushing resistant structural material, the crushing properties is improved without reducing the strength. Theratio of Zn/Mg should be controlled within the range of 4.57–6.15, while the total amount of Zn + Mg should be controlledwithin the range of 6.18–7.01.

Field Emission from TiO2/Ti Nanotube Array Films Modified with Carbon Nanotubes

Cheng-Wei Wang,Rui-Sheng Guo,Jian-Biao Chen,Yan Li,Jian Wang,Wei-Min Liu 한국물리학회 2009 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.55 No.6

Well-aligned TiO2/Ti nanotube array films were synthesized by using anodic oxidation of titanium in 0.5-wt% HF and were modified with carbon nanotubes (CNTs) assembled by using catalyzed chemical vapor deposition (CVD) at 650 ˚C. The morphology and the quality of the films were assessed with field emission scanning electron microscopy and Raman spectrometry (325 nm). The field emission characteristics of such TiO2/Ti nanostructures were investigated before and after being modified with CNTs. The results show that the TiO2/Ti nanotube arrays possess a moderate turn-on electric field of 7.4 V/µm, a field emission current density of 2.7 mA/cm2 at 23 V/µm. It is noteworthy that the turn-on field of the TiO2/Ti nanotube arrays modified with CNTs is decreased significantly to 1.3 V/µm, and the emission current density is increased to 10 mA/cm2 at 5.6 V/µm. This novel structure shows high emission efficiency as a field emitter. Well-aligned TiO2/Ti nanotube array films were synthesized by using anodic oxidation of titanium in 0.5-wt% HF and were modified with carbon nanotubes (CNTs) assembled by using catalyzed chemical vapor deposition (CVD) at 650 ˚C. The morphology and the quality of the films were assessed with field emission scanning electron microscopy and Raman spectrometry (325 nm). The field emission characteristics of such TiO2/Ti nanostructures were investigated before and after being modified with CNTs. The results show that the TiO2/Ti nanotube arrays possess a moderate turn-on electric field of 7.4 V/µm, a field emission current density of 2.7 mA/cm2 at 23 V/µm. It is noteworthy that the turn-on field of the TiO2/Ti nanotube arrays modified with CNTs is decreased significantly to 1.3 V/µm, and the emission current density is increased to 10 mA/cm2 at 5.6 V/µm. This novel structure shows high emission efficiency as a field emitter.

Draft Genome Assembly and Annotation for Cutaneotrichosporon dermatis NICC30027, an Oleaginous Yeast Capable of Simultaneous Glucose and Xylose Assimilation

Wang Laiyou,Guo Shuxian,Zeng Bo,Wang Shanshan,Chen Yan,Cheng Shuang,Liu Bingbing,Wang Chunyan,Wang Yu,Meng Qingshan 한국균학회 2022 Mycobiology Vol.50 No.1

The identification of oleaginous yeast species capable of simultaneously utilizing xylose and glucose as substrates to generate value-added biological products is an area of key eco- nomic interest. We have previously demonstrated that the Cutaneotrichosporon dermatis NICC30027 yeast strain is capable of simultaneously assimilating both xylose and glucose, resulting in considerable lipid accumulation. However, as no high-quality genome sequenc- ing data or associated annotations for this strain are available at present, it remains chal- lenging to study the metabolic mechanisms underlying this phenotype. Herein, we report a 39,305,439 bp draft genome assembly for C. dermatis NICC30027 comprised of 37 scaffolds, with 60.15% GC content. Within this genome, we identified 524 tRNAs, 142 sRNAs, 53 miRNAs, 28 snRNAs, and eight rRNA clusters. Moreover, repeat sequences totaling 1,032,129 bp in length were identified (2.63% of the genome), as were 14,238 unigenes that were 1,789.35 bp in length on average (64.82% of the genome). The NCBI non-redundant protein sequences (NR) database was employed to successfully annotate 11,795 of these unigenes, while 3,621 and 11,902 were annotated with the Swiss-Prot and TrEMBL databases, respectively. Unigenes were additionally subjected to pathway enrichment analyses using the Gene Ontology (GO), Kyoto Encyclopedia of Genes and Genomes (KEGG), Cluster of Orthologous Groups of proteins (COG), Clusters of orthologous groups for eukaryotic com- plete genomes (KOG), and Non-supervised Orthologous Groups (eggNOG) databases. Together, these results provide a foundation for future studies aimed at clarifying the mech- anistic basis for the ability of C. dermatis NICC30027 to simultaneously utilize glucose and xylose to synthesize lipids.

Genome-wide association study for intramuscular fat content in Chinese Lulai black pigs

Yanping Wang,Chao Ning,Cheng Wang,Jianfeng Guo,Jiying Wang,Ying Wu 아세아·태평양축산학회 2019 Animal Bioscience Vol.32 No.5

Objective: Intramuscular fat (IMF) content plays an important role in meat quality. Identification of single nucleotide polymorphisms (SNPs) and genes related to pig IMF, especially using pig populations with high IMF content variation, can help to establish novel molecular breeding tools for optimizing IMF in pork and unveil the mechanisms that underlie fat metabolism. Methods: We collected muscle samples of 453 Chinese Lulai black pigs, measured IMF content by Soxhlet petroleum-ether extraction method, and genotyped genome-wide SNPs using GeneSeek Genomic Profiler Porcine HD BeadChip. Then a genome-wide association study was performed using a linear mixed model implemented in the GEMMA software. Results: A total of 43 SNPs were identified to be significantly associated with IMF content by the cutoff p<0.001. Among these significant SNPs, the greatest number of SNPs (n = 19) were detected on Chr.9, and two linkage disequilibrium blocks were formed among them. Additionally, 17 significant SNPs are mapped to previously reported quantitative trait loci (QTLs) of IMF and confirmed previous QTLs studies. Forty-two annotated genes centering these significant SNPs were obtained from Ensembl database. Overrepresentation test of pathways and gene ontology (GO) terms revealed some enriched reactome pathways and GO terms, which mainly involved regulation of basic material transport, energy metabolic process and signaling pathway. Conclusion: These findings improve our understanding of the genetic architecture of IMF content in pork and facilitate the follow-up study of fine-mapping genes that influence fat deposition in muscle.

No Association Between the USP7 Gene Polymorphisms and Colorectal Cancer in the Chinese Han Population

Li, Xin,Wang, Yang,Li, Xing-Wang,Liu, Bao-Cheng,Zhao, Qing-Zhu,Li, Wei-Dong,Chen, Shi-Qing,Huang, Xiao-Ye,Yang, Feng-Ping,Wang, Quan,Wang, Jin-Fen,Xiao, Yan-Zeng,Xu, Yi-Feng,Feng, Guo-Yin,Peng, Zhi-Ha Asian Pacific Journal of Cancer Prevention 2012 Asian Pacific journal of cancer prevention Vol.13 No.5

Colorectal cancer (CRC), now the third most common cancer across the world, is known to aggregate in families. USP7 is a very important protein with an important role in regulating the p53 pathway, which is critical for genomic stability and tumor suppression. We here genotyped eight SNPs within the USP7 gene and conducted a case-control study in 312 CRC patients and 270 healthy subjects in the Chinese Han population. No significant associations were found for any single SNP and CRC risk. Our data eliminate USP7 as a potential candidate gene towards for CRC in the Han Chinese population.

A Novel 3D Polypseudo-rotaxane Metal-organic Framework Based on a Flexible Bis-pyridyl-bis-amide Ligand

Wang, Xiu-Li,Han, Na,Lin, Hong-Yan,Xu, Chuang,Luan, Jian,Liu, Guo-Cheng Korean Chemical Society 2012 Bulletin of the Korean Chemical Society Vol.33 No.11

A novel 3D compound $\{[Cu(L)(H_2O)_4][Cu_2(SIP)_2(L)_2]\}{\cdot}2H_2O$ (1) (L = N,N-bis(4-pyridinecarboxamide)-1,4-butane, SIP = 5-sulfoisophthalate) is hydrothermally synthesized. X-ray diffraction analysis reveals that compound 1 is composed of 2D anionic $[Cu_2(SIP)_2(L)_2]_n{^{2n-}}$ double-layers and discrete 1D cationic $[CuL(H_2O)_4]_n{^{2n+}}$ polymeric chains, which represents a rare 3D polypseudo-rotaxane MOF from intercalation of 1D and 2D framework. In addition, the luminescent property and electrochemical behavior of compound 1 have been investigated.

Pretherapy 18F-FDG PET/CT in Predicting Disease Relapse in Patients With Immunoglobulin G4-Related Disease: A Prospective Study

Cheng Mei-Fang,Guo Yue Leon,Yen Ruoh-Fang,Wu Yen-Wen,Wang Hsiu-Po 대한영상의학회 2023 Korean Journal of Radiology Vol.24 No.6

Objective: To investigate whether the levels of inflammation detected by 18F-fluorodeoxyglucose (FDG) positron emission tomography (PET)/computed tomography (CT) can predict disease relapse in immunoglobulin G4-related disease (IgG4-RD) patients receiving standard induction steroid therapy. Materials and Methods: This prospective study analyzed pretherapy FDG PET/CT images from 48 patients (mean age, 63 ± 12.9 years; 45 males and 3 females) diagnosed with IgG4-RD between September 2008 and February 2018, who subsequently received standard induction steroid therapy as the first-line treatment. Multivariable Cox proportional hazards models were used to identify the potential prognostic factors associated with relapse-free survival (RFS). Results: The median follow-up time for the entire cohort was 1913 days (interquartile range [IQR], 803–2929 days). Relapse occurred in 81.3% (39/48) patients during the follow-up period. The median time to relapse was 210 days (IQR, 140–308 days) after completion of standardized induction steroid therapy. Among the 17 parameters analyzed, Cox proportional hazard analysis identified whole-body total lesion glycolysis (WTLG) > 600 on FDG-PET as an independent risk factor for disease relapse (median RFS, 175 vs. 308 days; adjusted hazard ratio, 2.196 [95% confidence interval: 1.080–4.374]; P = 0.030). Conclusion: WTLG on pretherapy FDG PET/CT was the only significant factor associated with RFS in IgG-RD patients receiving standard steroid induction therapy.

Prediction of postoperative pancreatic fistula using a nomogram based on the updated definition

Cheng-Xiang Guo,Yi-Nan Shen,Qi Zhang,Xiao-Zhen Zhang,Jun-Li Wang,Shun-Liang Gao,Jian-Ying Lou,Ri-Sheng Que,Tao Ma,Ting-Bo Liang,Xue-Li Bai 대한외과학회 2020 Annals of Surgical Treatment and Research(ASRT) Vol.98 No.2

Purpose: The International Study Group on Pancreatic Fistula’s definition of postoperative pancreatic fistula (POPF) has recently been updated. This study aimed to identify risk factors for POPF in patients having pancreaticoduodenectomy (PD) and to generate a nomogram to predict POPF. Methods: Data on 298 patients who underwent PD from March 2012 to October 2017 was retrospectively reviewed and POPF statuses were redefined. A nomogram was constructed using data from 220 patients and validated using the remaining 78 patients. Independent risk factors for POPF were identified using univariate and multivariate analyses. A predictive nomogram was established based on the independent risk factors and was compared with existing models. Results: Texture of the pancreas, size of the main pancreatic duct, portal vein invasion, and definitive pathology were the identified risk factors. The nomogram had a C-index of 0.793 and was internally validated. The nomogram performed better (C-index of 0.816) than the other most cited models (C-indexes of 0.728 and 0.735) in the validation cohort. In addition, the nomogram can assign patients into low- (less than 10%), intermediate- (10% to 30%), and high-risk (equal or higher than 30%) groups to facilitate personalized management. Conclusion: The nomogram accurately predicted POPF in patients having PD.

Molecular Characterization of a Transient Expression Gene Encoding for 1-Aminocyclopropane-1-carboxylate Synthase in Cotton (Gossypium hirsutum L.)

Wang, Xia,Zhang, Ying,Zhang, Jiedao,Cheng, Cheng,Guo, Xingqi Korean Society for Biochemistry and Molecular Biol 2007 Journal of biochemistry and molecular biology Vol.40 No.5

Ethylene performs an important function in plant growth and development. 1-aminocyclopropane-1-carboxylate (ACC) synthase (ACS), the key enzyme involved in ethylene biosynthesis, has been the focus of most ethylene studies. Here, a cotton ACS gene referred to as Gossypium hirsutum ACS1 (GhACS1), was isolated. The full-length cDNA of GhACS1 encodes for a 476-amino acid protein which harbors seven conserved regions, 11 invariant amino acid residues, and the PLP binding active site, all of which characterize ACC synthases. Alignment analysis showed that GhACS1 shared a high degree of identity with other known ACC synthases from different species. Two introns were detected in the genomic DNA sequence, and the results of Southern blot analysis suggested that there might be a multi-gene family encoding for ACC synthase in cotton. From the phylogenetic tree constructed with 24 different kinds of ACC synthases, we determined that GhACS1 falls into group II, and was closely associated with the wound-inducible ACS of citrus. The analysis of the 5' flanking region of GhACS1 revealed a group of putative cis-acting elements. The results of expression analysis showed that GhACS1 displayed its transient expression nature after wounding, abscisic acid (ABA), and $CuCl_2$ treatments. These results indicate that GhACS1, which was transiently expressed in response to certain stimuli, may be involved in the production of ethylene for the transmission of stress signals.

Theoretical research on the identification method of bridge dynamic parameters using free decay response

Guo-jin Tan,Yong-chun Cheng,Han-bing Liu,Long-lin Wang 국제구조공학회 2011 Structural Engineering and Mechanics, An Int'l Jou Vol.38 No.3

Input excitation and output response of structure are needed in conventional modal analysis methods. However, input excitation is often difficult to be obtained in the dynamic load test of bridge structures. Therefore, what attracts engineers’ attention is how to get dynamic parameters from the output response. In this paper, a structural experimental modal analysis method is introduced, which can be used to conveniently obtain dynamic parameters of the structure from the free decay response. With known damping coefficients, this analysis method can be used to identify the natural frequencies and the mode shapes of MDOF structures. Based on the modal analysis theory, the mathematical relationship of damping ratio and frequency is obtained. By using this mathematical relationship to improve the previous method, an improved experimental modal analysis method is proposed in this paper. This improved method can overcome the deficiencies of the previous method, which can not identify damping ratios and requires damping coefficients in advance. Additionally, this improved method can also identify the natural frequencies, mode shapes and damping ratios of the bridge only from the free decay response, and ensure the stability of identification process by using modern mathematical means. Finally, the feasibility and effectiveness of this method are demonstrated by a numerical example of a simply supported reinforced concrete beam.