Free vibration and buckling analysis of the impacted hybrid composite beams

Emin Ergun,Yasin Yilmaz,Hasan Çallioğlu 국제구조공학회 2016 Structural Engineering and Mechanics, An Int'l Jou Vol.59 No.6

The aim of this experimental study is to investigate the free vibration and buckling behaviors of hybrid composite beams having different span lengths and orientation angles subjected to different impact energy levels. The impact energies are applied in range from 10 J to 30 J. Free vibration and buckling behaviors of intact and impacted hybrid composite beams are compared with each other for different span lengths, orientation angles and impact levels. In free vibration analysis, the first three modes of hybrid beams are considered and natural frequencies are normalized. It is seen that first and second modes are mostly affected with increasing impact energy level. Also, the fundamental natural frequency is mostly affected with the usage of mold that have 40 mm span length (SP40). Moreover, as the impact energy increases, the normalized critical buckling loads decrease gradually for 0

A Simultaneous Analytical Method for Duplex Identification of Porcine and Horse in the Meat Products by EvaGreen based Real-time PCR

Sakalar, Ergun,Ergun, Seyma Ozcirak,Akar, Emine Korean Society for Food Science of Animal Resource 2015 한국축산식품학회지 Vol.35 No.3

A duplex real-time polymerase chain reaction (PCR) based assay for the detection of porcine and horse meat in sausages was designed by using EvaGreen fluorescent dye. Primers were selected from mitochondrial 12S rRNA and 16S rRNA genes which are powerful regions for identification of horse and porcine meat. DNA from reference samples and industrial products was successfully extracted using the GIDAGEN® Multi-Fast DNA Isolation Kit. Genomes were identified based on their specific melting peaks (Mp) which are 82.5℃ and 78℃ for horse and porcine, respectively. The assay used in this study allowed the detection of as little as 0.0001% level of horse meat and 0.001% level of porcine meat in the experimental admixtures. These findings indicate that EvaGreen based duplex realtime PCR is a potentially sensitive, reliable, rapid and accurate assay for the detection of meat species adulterated with porcine and horse meats.

A Simultaneous Analytical Method for Duplex Identification of Porcine and Horse in the Meat Products by EvaGreen based Real-time PCR

Ergun Sakalar,Seyma Özçirak Ergün,Emine Akar 한국축산식품학회 2015 한국축산식품학회지 Vol.35 No.3

A duplex real-time polymerase chain reaction (PCR) based assay for the detection of porcine and horse meat in sausages was designed by using EvaGreen fluorescent dye. Primers were selected from mitochondrial 12S rRNA and 16S rRNA genes which are powerful regions for identification of horse and porcine meat. DNA from reference samples and industrial products was successfully extracted using the GIDAGEN® Multi-Fast DNA Isolation Kit. Genomes were identified based on their specific melting peaks (Mp) which are 82.5°C and 78°C for horse and porcine, respectively. The assay used in this study allowed the detection of as little as 0.0001% level of horse meat and 0.001% level of porcine meat in the experimental admixtures. These findings indicate that EvaGreen based duplex real- time PCR is a potentially sensitive, reliable, rapid and accurate assay for the detection of meat species adulterated with porcine and horse meats.

Repair of a postappendectomy massive ventral hernia using tissue expanders

Yeliz Emine Ersoy,Fatih Celebi,Fazilet Erozgen,Selma Sonmez Ergun,Murat Akaydin,Rafet Kaplan 대한외과학회 2013 Annals of Surgical Treatment and Research(ASRT) Vol.84 No.1

Reconstruction of large abdominal wall defects is a challenging problem. Various reconstructive techniques have been described in the surgical literature each with its advantages and disadvantages. In this report we describe our experience in treating a patient with large abdominal wall defect by staged abdominal wall reconstruction utilizing prosthetic mesh in conjunction with tissue expanders. A 41-year-old male presented with abdominal pain. Exploratory laparotomy showed perforated appendicitis with intraabdominal abscess of 1,500 mL. Postoperatively, he developed intraperitoneal sepsis. To prevent abdominal compartment syndrome, he was reoperated and left with “pen abdomen” After several open abdomen lavages, his abdominal wall defect was allowed to granulate. After epithelization of the defect, the abdominal wall was reconstructed using prosthetic mesh and tissue expanders. The tissue expansion process was well tolerated. We suggest that the use of tissue expanders provides reliable and well-vascularized soft-tissue coverage in abdominal wall reconstruction.

In vitro comparison of two different materials for the repair of urethan dimethacrylate denture bases

Tonguc Sulun,Ergun Bozdag,Emin Sunbuloglu,Onur Geckili,Hakan Bilhan,Altug Cilingir 대한치과보철학회 2013 The Journal of Advanced Prosthodontics Vol.5 No.4

PURPOSE The purpose of this in vitro study was to investigate the flexural properties of a recently introduced urethane dimethacrylate denture base material (Eclipse) after being repaired with two different materials. MATERIALS AND METHODS Two repair groups and a control group consisting of 10 specimens each were generated. The ES group was repaired with auto-polymerizing polymer. The EE group was repaired with the Eclipse. The E group was left intact as a control group. A 3-point bending test device which was set to travel at a crosshead speed of 5 mm/min was used. Specimens were loaded until fracture occurred and the mean displacement, maximum load, flexural modulus and flexural strength values and standard deviations were calculated for each group and the data were statistically analyzed. The results were assessed at a significance level of P<.05. RESULTS The mean "displacement", "maximum load before fracture", "flexural strength" and "flexural modulus" rates of Group E were statistically significant higher than those of Groups ES and EE, but no significant difference (P>.05) was found between the mean values of Group ES and EE. There was a statistically significant positive relation (P<.01) between the displacement and maximum load of Group ES (99.5%), Group EE (94.3%) and Group E (84.4%). CONCLUSION The more economic and commonly used self-curing acrylic resin can be recommended as an alternative repair material for Eclipse denture bases.

The impact of frenulum height on strains in maxillary denture bases

Hakan Bilhan,Gokhan Baysal,Emin Sunbuloglu,Ergun Bozdag,Altug Cilingir 대한치과보철학회 2013 The Journal of Advanced Prosthodontics Vol.5 No.4

PURPOSE The midline fracture of maxillary complete dentures is a frequently encountered complication. The purpose of this study was to assess the effect of frenulum height on midline strains of maxillary complete dentures. MATERIALS AND METHODS A removable maxillary complete denture was fabricated and duplicated seven times. Four different labial frenulum heights were tested for stresses occurring on the palatal cameo surface. The strains were measured with strain gauges placed on 5 different locations and the stresses were calculated. To mimic occlusal forces bilaterally 100 N of load was applied from the premolar and molar region. RESULTS A statistically significant association between the height of the labial frenulum and the calculated stresses and strains was shown (P<.05) predominantly on the midline and especially on the incisive papilla. The results showed that stress on the anterior midline of the maxillary complete denture increases with a higher labial frenulum. CONCLUSION Within the limitations of this in vitro study, it can be concluded that the stress on the anterior midline of the maxillary complete denture increases with a higher labial frenulum. Surgical or mechanical precautions should be taken to prevent short-term failure of maxillary complete dentures due to stress concentration and low cycle fatigue tendency at the labial frenulum region.

Serum Chitotriosidase Activity in Pulmonary Tuberculosis: Response to Treatment and Correlations with Clinical Parameters

Gulhan Cakır,Seyfettin Gumus,Ergun Ucar,Hatice Kaya,Ergun Tozkoparan,Emin Ozgur Akgul,Bulent Karaman,Omer Deniz,Ismail Kurt,Metin Ozkan,Hayati Bilgic 대한진단검사의학회 2012 Annals of Laboratory Medicine Vol.32 No.3

Background: Chitotriosidase is an accepted marker of macrophage activation. In this study, we investigated serum chitotriosidase levels in pulmonary tuberculosis (PTB). Methods: Forth-two patients with PTB and 30 healthy subjects were enrolled in the study. The radiological extent of PTB, radiological sequela after treatment, and the degree of smear positivity were assessed. Chitotriosidase levels were measured by a fluorometric method. Results: The serum chitotriosidase levels of the PTB patients were significantly higher than those of the control subjects (39.73±24.97 vs. 9.63±4.55 nmol/mL/h, P<0.001). After completion of the standard 6-month antituberculous treatment, chitotriosidase levels in PTB patients significantly decreased (10.47±4.54 nmol/mL/h, P<0.001). Chitotriosidase levels correlated significantly with the radiological extent of PTB, degree of smear positivity, and post-treatment radiological sequela score (r=0.439, r=0.449, and r=0.337, respectively). Conclusions: This study demonstrated that serum chitotriosidase levels increase in PTB; therefore, chitotriosidase can be used as a marker of disease activity, severity, and response to treatment. Background: Chitotriosidase is an accepted marker of macrophage activation. In this study, we investigated serum chitotriosidase levels in pulmonary tuberculosis (PTB). Methods: Forth-two patients with PTB and 30 healthy subjects were enrolled in the study. The radiological extent of PTB, radiological sequela after treatment, and the degree of smear positivity were assessed. Chitotriosidase levels were measured by a fluorometric method. Results: The serum chitotriosidase levels of the PTB patients were significantly higher than those of the control subjects (39.73±24.97 vs. 9.63±4.55 nmol/mL/h, P<0.001). After completion of the standard 6-month antituberculous treatment, chitotriosidase levels in PTB patients significantly decreased (10.47±4.54 nmol/mL/h, P<0.001). Chitotriosidase levels correlated significantly with the radiological extent of PTB, degree of smear positivity, and post-treatment radiological sequela score (r=0.439, r=0.449, and r=0.337, respectively). Conclusions: This study demonstrated that serum chitotriosidase levels increase in PTB; therefore, chitotriosidase can be used as a marker of disease activity, severity, and response to treatment.

The impact of frenulum height on strains in maxillary denture bases

Cilingir, Altug,Bilhan, Hakan,Baysal, Gokhan,Sunbuloglu, Emin,Bozdag, Ergun The Korean Academy of Prosthodonitics 2013 The Journal of Advanced Prosthodontics Vol.5 No.4

PURPOSE. The midline fracture of maxillary complete dentures is a frequently encountered complication. The purpose of this study was to assess the effect of frenulum height on midline strains of maxillary complete dentures. MATERIALS AND METHODS. A removable maxillary complete denture was fabricated and duplicated seven times. Four different labial frenulum heights were tested for stresses occurring on the palatal cameo surface. The strains were measured with strain gauges placed on 5 different locations and the stresses were calculated. To mimic occlusal forces bilaterally 100 N of load was applied from the premolar and molar region. RESULTS. A statistically significant association between the height of the labial frenulum and the calculated stresses and strains was shown (P<.05) predominantly on the midline and especially on the incisive papilla. The results showed that stress on the anterior midline of the maxillary complete denture increases with a higher labial frenulum. CONCLUSION. Within the limitations of this in vitro study, it can be concluded that the stress on the anterior midline of the maxillary complete denture increases with a higher labial frenulum. Surgical or mechanical precautions should be taken to prevent short-term failure of maxillary complete dentures due to stress concentration and low cycle fatigue tendency at the labial frenulum region.

In vitro comparison of two different materials for the repair of urethan dimethacrylate denture bases

Cilingir, Altug,Bilhan, Hakan,Geckili, Onur,Sulun, Tonguc,Bozdag, Ergun,Sunbuloglu, Emin The Korean Academy of Prosthodonitics 2013 The Journal of Advanced Prosthodontics Vol.5 No.4

PURPOSE. The purpose of this in vitro study was to investigate the flexural properties of a recently introduced urethane dimethacrylate denture base material (Eclipse) after being repaired with two different materials. MATERIALS AND METHODS. Two repair groups and a control group consisting of 10 specimens each were generated. The ES group was repaired with auto-polymerizing polymer. The EE group was repaired with the Eclipse. The E group was left intact as a control group. A 3-point bending test device which was set to travel at a crosshead speed of 5 mm/min was used. Specimens were loaded until fracture occurred and the mean displacement, maximum load, flexural modulus and flexural strength values and standard deviations were calculated for each group and the data were statistically analyzed. The results were assessed at a significance level of P<.05. RESULTS. The mean "displacement", "maximum load before fracture", flexural strength" and "flexural modulus" rates of Group E were statistically significant higher than those of Groups ES and EE, but no significant difference (P>.05) was found between the mean values of Group ES and EE. There was a statistically significant positive relation (P<.01) between the displacement and maximum load of Group ES (99.5%), Group EE (94.3%) and Group E (84.4%). CONCLUSION. The more economic and commonly used self-curing acrylic resin can be recommended as an alternative repair material for Eclipse denture bases.