http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
The Effect of CdS QDs Structure on the InGaP/GaAs/Ge Triple Junction Solar Cell Efficiency
Chen-Chen Chung,Binh Tinh Tran,Hau-Vei Han,Yen-Teng Ho,Hung-Wei Yu,Kung-Liang Lin,Hong-Quan Nguyen,Peichen Yu,Hao-Chung Kuo,Edward Yi Chang 대한금속·재료학회 2014 ELECTRONIC MATERIALS LETTERS Vol.10 No.2
This work describes optical and electrical characteristics of InGaP/GaAs/Ge triple-junction (T-J) solar cells with CdS quantum dots (QDs) fabricated by a novel chemical solution. With the anti-reflective feature at long wavelength and down-conversion at UV regime, the CdS quantum dot effectively enhance the overall power conversion efficiency more than that of a traditional GaAs-based device. Experimental results indicate that CdS quantum dot can enhance the short-circuit current by 0.33 mA/cm2, which is observed for the triple-junction solar cells with CdS QDs of about 3.5 nm in diameter. Moreover, the solar cell conversion efficiency is improved from 28.3% to 29.0% under one-sun AM 1.5 global illumination I-V measurement.
RBF-POD reduced-order modeling of DNA molecules under stretching and bending
Lee, Chung-Hao,Chen, Jiun-Shyan Techno-Press 2013 Interaction and multiscale mechanics Vol.6 No.4
Molecular dynamics (MD) systems are highly nonlinear and nonlocal, and the conventional model order reduction methods are ineffective for MD systems. The RBF-POD method (Lee and Chen, 2013) employed a radial basis function (RBF) approximated potential energies and inter-atomic forces of MD systems under the framework of the proper orthogonal decomposition (POD) method for the reduced-order modeling of MD systems. In this work, we focus on the numerical procedures of the RBF-POD method and demonstrate how to apply this approach to the modeling of ds-DNA molecules under stretching and bending conditions.
Chung, Ting Wen,Tan, Kok-Tong,Chan, Hong-Lin,Lai, Ming-Derg,Yen, Meng-Chi,Li, Yi-Ron,Lin, Sheng Hao,Lin, Chi-Chen Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.18
Interferon-gamma (IFN-${\gamma}$) has been used to treat various malignant tumors. However, the molecular mechanisms underlying the direct anti-proliferative activity of IFN-${\gamma}$ are poorly understood. In the present study, we examined the in vitro antitumor activity of IFN-${\gamma}$ on two human non-small-cell lung carcinoma (NSCLC) cell lines, H322M and H226. Our findings indicated that IFN-${\gamma}$ treatment caused a time-dependent reduction in cell viability and induced apoptosis through a FADD-mediated caspase-8/tBid/mitochondria-dependent pathway in both cell lines. Notably, we also postulated that IFN-${\gamma}$ increased indoleamine 2,3-dioxygenase (IDO) expression and enzymatic activity in H322M and H226 cells. In addition, inhibition of IDO activity by the IDO inhibitor 1-MT or tryptophan significantly reduced IFN-${\gamma}$-induced apoptosis and death receptor 5 (DR5) expression, which suggests that IDO enzymatic activity plays an important role in the anti-NSCLC cancer effect of IFN-${\gamma}$. These results provide new mechanistic insights into interferon-${\gamma}$ antitumor activity and further support IFN-${\gamma}$ as a potential therapeutic adjuvant for the treatment of NCSLC.
Enhanced Performance of Solution‐Processed TESPE‐ADT Thin‐Film Transistors
Chen, Liang‐,Hsiang,Hu, Tarng‐,Shiang,Huang, Peng‐,Yi,Kim, Choongik,Yang, Ching‐,Hao,Wang, Juin‐,Jie,Yan, Jing‐,Yi,Ho, Jia‐,Chong,Lee, Cheng‐,Chung,Chen WILEY‐VCH Verlag 2013 Chemphyschem Vol.14 No.12
<P><B>Abstract</B></P><P>A solution‐processed anthradithiophene derivative, 5,11‐bis(4‐triethylsilylphenylethynyl)anthradithiophene (TESPE‐ADT), is studied for use as the semiconducting material in thin‐film transistors (TFTs). To enhance the electrical performance of the devices, two different kinds of solution processing (spin‐coating and drop‐casting) on various gate dielectrics as well as additional post‐treatment are employed on thin films of TESPE‐ADT, and <I>p</I>‐channel OTFT transport with hole mobilities as high as ∼0.12 cm<SUP>2</SUP> V<SUP>−1</SUP> s<SUP>−1</SUP> are achieved. The film morphologies and formed microstructures of the semiconductor films are characterized in terms of film processing conditions and are correlated with variations in device performance.</P>
Wu, Chung-Hao,Chen, Chien-Jung,Lin, Yu-Feng,Lin, Shu-Ken Techno-Press 2021 Advances in concrete construction Vol.12 No.5
This study experimentally investigated the improvement of bond strength and durability of concrete containing high volume fly ash. Concrete mixtures made with 0%, 25% and 60% replacement of cement with class F fly ash were prepared. Water-binder ratios ranged from 0.28 to 0.72. The compressive, flexural and pullout bond strength, the resistance to chloride-ion penetration, and the water permeability of concrete were measured and presented. Test results indicate that except for the concretes at early ages, the mechanical properties, bond strength, and the durability-related chloride-ion permeability and water permeability of concrete containing high volume (60% cement replacement) fly ash were obviously superior to the concrete without fly ash at later ages of beyond 56 days. The enhanced bond strength for the high volume fly-ash concrete either with or without steel confinement is a significant finding which might be valuable for the structural application.
Flexural behavior of reinforced lightweight concrete beams under reversed cyclic loading
Li-Kai Chien,Yi-Hao Kuo,Chung-Ho Huang,How-Ji Chen,Ping-Hu Cheng 국제구조공학회 2014 Structural Engineering and Mechanics, An Int'l Jou Vol.52 No.3
This paper presents the results of an experimental investigation on the flexural behavior of doubly reinforced lightweight concrete (R.L.C.) beams tested under cyclic loading. A total of 20 beam specimens were tested. Test results are presented in terms of ductility index, the degradation of strength and stiffness, and energy dissipation. The flexural properties of R.L.C. beam were compared to those of normal concrete (R.C.) beams. Test results show that R.L.C. beam with low and medium concrete strength (20, 40MPa) performed displacement ductility similar to the R.C. beam. The ductility can be improved by enhancing the concrete strength or decreasing the tension reinforcement ratio. Using lightweight aggregate in concrete is advantageous to the dynamic stiffness of R.L.C. beam. Enhancement of concrete strength and increase of reinforcement ratio will lead to increase of the stiffness degradation of beam. The energy dissipation of R.L.C beam, similar to R.C. beam, increase with the increase of tension reinforcement ratio. The energy dissipation of unit load cycle for smaller tension reinforcement ratio is relatively less than that of beam with higher reinforcement ratio.
On the continuum formulation for modeling DNA loop formation
Teng, Hailong,Lee, Chung-Hao,Chen, Jiun-Shyan Techno-Press 2011 Interaction and multiscale mechanics Vol.4 No.3
Recent advances in scientific computing enable the full atomistic simulation of DNA molecules. However, there exists length and time scale limitations in molecular dynamics (MD) simulation for large DNA molecules. In this work, a two-level homogenization of DNA molecules is proposed. A wavelet projection method is first introduced to form a coarse-grained DNA molecule represented with superatoms. The coarsened MD model offers a simplified molecular structure for the continuum description of DNA molecules. The coarsened DNA molecular structure is then homogenized into a three-dimensional beam with embedded molecular properties. The methods to determine the elasticity constants in the continuum model are also presented. The proposed continuum model is adopted for the study of mechanical behavior of DNA loop.