http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
효율적인 데이타 에퀴지션을 위한 앤티에어리어스 필터 설계에 관한 연구
최관순,안달 순천향대학교 부설 산업기술연구소 1996 순천향 산업기술연구소논문집 Vol.2 No.2
The aliasing phenomenon becomes a problem in A/D conversion systems when an input signal contains frequency components above half the A/D sampling rate. These higher frequencies can "fold over" into the lower frequency spect겨m and appear as erroneous signals that cannot be distinguished from valid sampled data. The best appch to eliminating false lower frequencies is to use an anti-aliasing filter, which inhibits aliasing by limiting the input signal bandwidth to below half the sampling rate. In this paper, anti-alias filter with elliptic characteristics are designed. This filter can reduce system cost, acquisition storage requirments, and analysis time by allowing for a lower sampling rate.
ISM 교재 구조화법을 이용한 교과서와 교사의 역학 개념 비교
최관순,김범기 한국교원대학교 과학교육연구소 1997 청람과학교육연구논총 Vol.7 No.1
본 연구의 목적은 고등학교 물리 Ⅱ 교과 내용 중 역학 개념의 구조를 체계적으로 밝혀 효율적인 물리 교수-학습에 관한 시사점을 얻는데 있다. ISM 교재 구조 분석을 위한 컴퓨터 프로그램을 이용하여 고등학교 물리 Ⅱ 교과서의 역학 개념 구조와 교사들이 파악하고 있는 역학 개념의 구조를 분석하여 비교하였다. 본 연구에서 교과서의 개념 구조와 교사의 개념 구조를 비교분석한 결과, 교사들이 갖고 있는 역학 개념의 구조는 전체적이기보다는 부분적인 경향이 강하므로, 효율적인 물리 교수-학습을 위해서는 통합적이고 체계적인 역학 개념의 구조 이해가 요구된다. The purpose of this study was to find the structure of the mechanics concepts in high-school physics textbooks and to provide meaningful information for effective instruction. The structure of the mechanics concepts in high-school physics texts and the teachers' conceptual structure of mechanics were defined by using the ISM(Interpretative Structural Modeling) program and then compared with each other. As a result of this study, the concepts in the texts were found to be related to one another, but teachers did not appreciate the fact that the concepts were related across the units. For the effective instruction-learning, teachers have to comprehend the relations between the individual concepts within the structure of text.
결합조직형성 법랑모세포종의 방사선학적 소견 : 증례보고 3례
최다혜,허경회,문제운,이원진,허민석,이삼선,최순철,박관수 대한구강악안면방사선학회 2006 Imaging Science in Dentistry Vol.37 No.1
Desmoplastic ameloblastoma is a rare histologic variant of ameloblastoma. It shows important differences in anatomic distribution, histologic appearance, and radiographic findings compared with the general type of ameloblastoma. It is histologically characterized by an abundance of densely collagenous stroma and radiographically a mixed radiolucent-radiopaque lesion. We present three cases of desmoplastic ameloblastoma. All the patients complained on buccal swelling with or without pain and the sites of occurrence were the anterior and the premolar region. Plain radiographs showed mixed radiopaque-radiolucent lesion with ill-defined or diffuse sclerotic margin and no external root resorption. Additionally, CT scans revealed buccal expansion and relatively well-defined margin of the lesions. The clinical and radiographic features of the presented cases were compared with those of the desmoplastic ameloblastoma in the previous literatures. (Korean J Oral Maxillofac Radiol 2006; 36 : 63-8)
최순관,김동식,공용해 순천향대학교 부설 산업기술연구소 2004 순천향 산업기술연구소논문집 Vol.10 No.2
웹을 이용하면 전 세계 어디라도 연결할 수 있고, 원하는 정보 또한 쉽게 제공받을 수 있다. 이러한 웹의 장접을 이용하여 다양한 교육용 콘텐츠가 개발되어지고 있다. 본 연구는 C언어 학습 콘텐츠를 개발중 값비싼 C 컴파일러를 구매하지 않고 쉽게 실습할 수 있는 방법으로, 클라이언트에 제한적으로 실행되어지는 C 컴파일러를 인터넷에서 이용하게 한 연구로 LINUX 기반의 서버측 C 컴파일러를 이용하여 프로그램을 작성 실행시켜 보는 시스템을 개발하였다. 구현된 시스템은 상용의 컴파일러를 구매하지 않아도 되는 경제적인 장점을 가진다.
최관순,공용해 순천향대학교 1992 논문집 Vol.15 No.3
Automated Input system has been developed to generate DEM(DIGITAL ELEVATION MODEL) data from contour map. Conventional methods used are based on either line tracking or raster-vector conversion. Both required a lot of manual input and computing time. The system developed here is based on automated recognition of number from symbol image and automated tracing of the sectional heights of the recognized lines.
최관순 순천향대학교 1989 논문집 Vol.12 No.4
This paper presents a method for constructing DEM(Digital Elevation Model) from the image data which are acquired from a commerical map using an image scanner. The processes of data acquisition, thinning, mark elimination, broken line linking and elevation interpolation have been performed. As a result, we obtained altitude information better than manual interpolation with a commercial map.
최관순,이순홈,김동식 순천향대학교 부설 산업기술연구소 2004 순천향 산업기술연구소논문집 Vol.10 No.2
원격 교육시스템의 구현은 인터넷의 기술의 급격한 발전과 함께 활발하게 연구가 진행 되고 있다. 공학 분야에서 원격 교육시스템을 구현하는데 가장 큰 제약사항은 하드웨어의 제어이다. 본 연구에서는 8051 원격 컴파일 시스템을 구현하였으며, 시스템의 구성은 학습자가 웹에서 8051실습 키트를 직접 제어해보며 학습하도록 할 것이다. 학습자는 C언어와 어셈블리어로 8051제어 소스를 작성하고 작성된 소스파일을 서버에 업로드 하여 컴파일 및 링크할 수 있다. 이 과정을 통해 생성된 실행파일을 서버에 연결되어있는 8051 실습키트에 다운로드하여 실행하도록 구현하였다. 또한, 실행 결과의 확인은 웹 카메라를 통해 학습자의 PC에 영상데이터를 전송하여 8051키트의 동작을 학습자들이 확인하게 된다.
최관순 순천향대학교 부설 산업기술연구소 1999 순천향 산업기술연구소논문집 Vol.5 No.2
A typical map image is consisted of number, symbols and lines that represent contour lines, geographical bounaries, roads, rivers and etc. This paper describe the two components: separation and recognition. The separation algorithm is based on hierachical method. The separation of proposed method is better than method using only a size of connected component. This proposed method will be used in GIS input system efficiently.
돼지 하악 과두의 해면골에서 유한요소분석법으로 예측한 방향에 따른 탄성율과 3차원 골 미세지표 간의 상관관계
박관수,이삼선,허경회,이원진,허민석,최순철 대한구강악안면방사선학회 2008 Imaging Science in Dentistry Vol.38 No.2
Purpose : To investigate the relationship between 3D bone architectural parameters and direction-related elastic moduli of cancellous bone of mandibular condyle. Materials and Methods : Two micro-pigs (Micro-pig^(R), PWG Genetics Korea) were used. Each pig was about 12 months old and weighing around 44 kg. 31 cylindrical bone specimen were obtained from cancellous bone of condyles for 3D analysis and measured by micro-computed tomography. Six parameters were trabecular thickness (Tb.Th), bone specific surface (BS/BV), percent bone volume (BV/TV), structure model index (SMI), degree of anisotropy (DA) and 3-dimensional fractal dimension (3DFD). Elastic moduli of three orthogonal directions (superiorinferior (SI), medial-lateral (ML), andterior-posterior (AP) direction) were calculated through finite element analysis. Results : Elastic modulus of superior-inferior direction was higher than those of other directions. Elastic moduli of 3 orthogonal directions showed different correlation with 3D architectural parameters. Elastic moduli of SI and ML directions showed significant strong to moderate correlation with BV/TV, SMI and 3DFD. Conclusion : Elastic modulus of cancellous bone of pig mandibular condyle was highest in the SI direction and it was supposed that the change into plate-like structure of trabeculae was mainly affected by increase of trabeculae of SI and ML directions.