http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Maxillary first molar with 7 root canals diagnosed using cone-beam computed tomography
Rodrigues, Evaldo,Braitt, Antonio Henrique,Galvao, Bruno Ferraz,da Silva, Emmanuel Joao Nogueira Leal The Korean Academy of Conservative Dentistry 2017 Restorative Dentistry & Endodontics Vol.42 No.1
Root canal anatomy is complex, and the recognition of anatomic variations could be a challenge for clinicians. This case report describes the importance of cone beam computed tomographyic (CBCT) imaging during endodontic treatment. A 23 year old woman was referred by her general dental practitioner with the chief complaint of spontaneous pain in her right posterior maxilla. From the clinical and radiographic findings, a diagnosis of symptomatic irreversible pulpitis was made and endodontic treatment was suggested to the patient. The patient underwent CBCT examination, and CBCT scan slices revealed seven canals: three mesiobuccal (MB1, MB2, and MB3), two distobuccal (DB1 and DB2), and two palatal (P1 and P2). Canals were successfully treated with reciprocating files and filled using single-cone filling technique. Precise knowledge of root canal morphology and its variation is important during root canal treatment. CBCT examination is an excellent tool for identifying and managing these complex root canal systems.
Rodrigues Maykely Naara Morais,Bruno Kely Firmino,Alencar Ana Helena Gonçalves de,Silva Julyana Dumas Santos,Siqueira Patrícia Correia de,Decurcio Daniel de Almeida,Estrela Carlos 대한치과보존학회 2021 Restorative Dentistry & Endodontics Vol.46 No.4
Objectives This study compared the Biodentine, MTA Repair HP, and Bio-C Repair bioceramics in terms of bond strength to dentin, failure mode, and compression. Materials and Methods Fifty-four slices obtained from the cervical third of 18 single-rooted human mandibular premolars were randomly distributed (n = 18). After insertion of the bioceramic materials, the push-out test was performed. The failure mode was analyzed using stereomicroscopy. Another set of cylindrically-shaped bioceramic samples (n = 10) was prepared for compressive strength testing. The normality of data distribution was analyzed using the Shapiro-Wilk test. The Kruskal-Wallis and Friedman tests were used for the push-out test data, while compressive strength was analyzed with analysis of variance and the Tukey test, considering a significance level of 0.05. Results Biodentine presented a higher median bond strength value (14.79 MPa) than MTA Repair HP (8.84 MPa) and Bio-C Repair (3.48 MPa), with a significant difference only between Biodentine and Bio-C Repair. In the Biodentine group, the most frequent failure mode was mixed (61%), while in the MTA Repair HP and Bio-C Repair groups, it was adhesive (94% and 72%, respectively). Biodentine showed greater resistance to compression (29.59 ± 8.47 MPa) than MTA Repair HP (18.68 ± 7.40 MPa) and Bio-C Repair (19.96 ± 3.96 MPa) (p < 0.05). Conclusions Biodentine showed greater compressive strength than MTA Repair HP and Bio-C Repair, and greater bond strength than Bio-C Repair. The most frequent failure mode of Biodentine was mixed, while that of MTA Repair HP and Bio-C Repair was adhesive. Objectives This study compared the Biodentine, MTA Repair HP, and Bio-C Repair bioceramics in terms of bond strength to dentin, failure mode, and compression. Materials and Methods Fifty-four slices obtained from the cervical third of 18 single-rooted human mandibular premolars were randomly distributed (n = 18). After insertion of the bioceramic materials, the push-out test was performed. The failure mode was analyzed using stereomicroscopy. Another set of cylindrically-shaped bioceramic samples (n = 10) was prepared for compressive strength testing. The normality of data distribution was analyzed using the Shapiro-Wilk test. The Kruskal-Wallis and Friedman tests were used for the push-out test data, while compressive strength was analyzed with analysis of variance and the Tukey test, considering a significance level of 0.05. Results Biodentine presented a higher median bond strength value (14.79 MPa) than MTA Repair HP (8.84 MPa) and Bio-C Repair (3.48 MPa), with a significant difference only between Biodentine and Bio-C Repair. In the Biodentine group, the most frequent failure mode was mixed (61%), while in the MTA Repair HP and Bio-C Repair groups, it was adhesive (94% and 72%, respectively). Biodentine showed greater resistance to compression (29.59 ± 8.47 MPa) than MTA Repair HP (18.68 ± 7.40 MPa) and Bio-C Repair (19.96 ± 3.96 MPa) (p < 0.05). Conclusions Biodentine showed greater compressive strength than MTA Repair HP and Bio-C Repair, and greater bond strength than Bio-C Repair. The most frequent failure mode of Biodentine was mixed, while that of MTA Repair HP and Bio-C Repair was adhesive.
Maxillary first molar with 7 root canals diagnosed using cone-beam computed tomography
Evaldo Rodrigues,Antônio Henrique Braitt,Bruno Ferraz Galvão,Emmanuel João Nogueira Leal da Silva 대한치과보존학회 2017 Restorative Dentistry & Endodontics Vol.42 No.1
Root canal anatomy is complex, and the recognition of anatomic variations could be a challenge for clinicians. This case report describes the importance of cone beam computed tomographyic (CBCT) imaging during endodontic treatment. A 23 year old woman was referred by her general dental practitioner with the chief complaint of spontaneous pain in her right posterior maxilla. From the clinical and radiographic findings, a diagnosis of symptomatic irreversible pulpitis was made and endodontic treatment was suggested to the patient. The patient underwent CBCT examination, and CBCT scan slices revealed seven canals: three mesiobuccal (MB1, MB2, and MB3), two distobuccal (DB1 and DB2), and two palatal (P1 and P2). Canals were successfully treated with reciprocating files and filled using single-cone filling technique. Precise knowledge of root canal morphology and its variation is important during root canal treatment. CBCT examination is an excellent tool for identifying and managing these complex root canal systems.
WeTrace: a Privacy-preserving Tracing Approach
Muriel Franco,Bruno Rodrigues,Christian Killer,Eder John Scheid,Alessandro De Carli,Andreas Gassmann,David Schönbächler,Burkhard Stiller 한국통신학회 2021 Journal of communications and networks Vol.23 No.5
For the protection of people and society against harmand health threats—especially in case of the COVID-19 pandemic— a variety of different disciplines needs to be involved. The datacollection of basic and health-related data of individuals in today’shighly mobile society does help to plan, protect, and identify nextsteps health authorities and governments can, shall, or need to planfor or even implement. Thus, every individual, human, and inhabitantof the world is the key player—very different from many pastcrises’. And since all individuals are involved his/her (a) health and(b) privacy shall be considered in a very carefully crafted balance,not overruling one aspect with another one. Privacy remains key. The solution of the current pandemic’s data collection can bebased on a fully privacy-preserving application, which can be usedby individuals on their mobile devices, such as smartphones, whilemaintaining at the same time their privacy. Additionally, respectivedata collected in such a fully distributed setting does help to confinethe pandemic and can be achieved in a democratic and very open,but still and especially privacy-protecting manner. Therefore, the WeTrace approach and application designed utilizesthe Bluetooth low energy (BLE) communication channel,many modern mobile devices offer, where public-key cryptographyis being applied to allow for deciphering of messages for that destinationit had been intended for. Since literally every other potentialparticipant only listens to random data, even a brute force attackwill not succeed. WeTrace and its Open Source implementation ensurethat any receiver of a message knows that this is for him/her,without being able to identify the original sender.
Murilo Matias,Carlos Flores-Mir,Marcio Rodrigues de Almeida,Bruno da Silva Vieira,Karina Maria Salvatore de Frei,Daniela Calabrese Nunes,Marcos Cezar Ferreira,Weber Ursi 대한치과교정학회 2021 대한치과교정학회지 Vol.51 No.6
Objective: To identify optimal areas for the insertion of extra-alveolar miniscrews into the infrazygomatic crest (IZC) and mandibular buccal shelf (MBS), using cone beam computed tomography (CBCT) imaging in patients with different craniofacial patterns. Methods: CBCT reconstructions of untreated individuals were used to evaluate the IZC and MBS areas. The participants were divided into three groups, based on the craniofacial pattern, namely, brachyfacial (n = 15; mean age, 23.3 years), mesofacial (n = 15; mean age, 19.24 years), and dolichofacial (n = 15; mean age, 17.79 years). In the IZC, the evaluated areas were at 11, 13, and 15 ㎜ above the buccal cusp tips of the right and left first molars. In the MBS, the evaluated areas were at the projections of the first molars’ distal roots and second molars’ mesial and distal roots, at a 4- and 8-㎜ distance from the cementoenamel junction. Intergroup comparisons were performed with analysis of variance and the Tukey test. Results: There was no statistically significant difference in the IZC bone thickness among the groups. For MBS bone availability, some comparisons revealed no difference; meanwhile, other comparisons revealed increased MBS bone thickness in the brachyfacial (first molars distal roots) and dolichofacial (second molars mesial and distal roots) patterns. Conclusions: There was no significant difference in the IZC bone thickness among the groups. The facial skeletal pattern may affect the availability of ideal bone thickness for the insertion of extra-alveolar miniscrews in the MBS region; however, this variability is unlikely to be clinically meaningful.
Performance of Bemisia tabaci MEAM1 on soybean and resistance traits of cultivars
Carolina Farias e Silva Maria,de Sousa Rodrigues Arielly,Henrique Ferreira Rodrigues Raimundo,Ettore Pavan Bruno,Barboza Silva Luciana 한국응용곤충학회 2023 Journal of Asia-Pacific Entomology Vol.26 No.2
Bemisia tabaci MEAM1, known as whitefly, poses a significant threat to soybean crops worldwide. To develop effective pest management strategies, it is crucial to understand how this insect pest performs on different soybean cultivars and identify resistance traits in these cultivars. This study aimed to assess the biological development of B. tabaci MEAM1 and the performance of five consecutive whitefly generations on various soybean cultivars to determine the stability of resistance across multiple insect generations. Additionally, the study aimed to estimate genetic parameters associated with resistance traits. To conduct the experiment, twenty individuals of B. tabaci were released and confined within cages attached to soybean leaf petioles. The experi ment followed a completely randomized design with eleven treatments and five replicates. The emerging insects from the bioassay were confined to plants of their respective cultivars. This process was repeated for five consecutive generations of whiteflies to evaluate the cultivars’ ability to exhibit resistance across multiple generations of the pest. The results showed that the cultivars M 8808 and AS 3810 had a negative impact on B. tabaci oviposition. Additionally, the cultivar BRS 9280 influenced the development of the insect. Based on the selection index, cultivars BRS 9280, AS 3810, M 8808, and BRS 8383 exhibited resistance traits. Furthermore, cultivars BRS 9280, AS 3810, and M 8808 demonstrated resistance characteristics consistently over five gen erations when subjected to whitefly pressure. These cultivars can be considered valuable sources of resistance against B. tabaci MEAM1 for breeding programs aimed at developing resistant soybean cultivars.
Thaynã Ramos Flores,Ana Paula dos Santos Rodrigues,Rosália Garcia Neves,Sandro Rodrigues Batista,Doralice Severo da Cruz Teixeira,Erika Aparecida da Silveira,Deborah Carvalho Malta,Bruno Pereira Nunes 대한비만학회 2021 The Korean journal of obesity Vol.30 No.2
Background: An increase in body mass index (BMI) is strongly associated with the occurrence of multimorbidity, and overweight and obesity are contributing factors for the increase in morbidities. Thus, the present study aimed to evaluate the occurrence of multimorbidity and associated factors in Brazilian adults with and without overweight or obesity. Methods: This was a cross-sectional population-based study with data from the National Health Survey (2013) including individuals aged 18 years or older. Multimorbidity was defined as having ≥2 diseases from the list of 15 morbidities on the self-reported questionnaire (self-reported medical diagnosis in life). BMI was categorized as: ≤24.9 kg/m2 (low weight and eutrophy), 25.0–29.9 kg/m2 (overweight), and ≥30.0 kg/m2 (obesity). Sex, age, and schooling were the covariates. Poisson regression was used for crude and adjusted analyses for the variables representing access to health services estimating the prevalence ratio (PR) and 95% confidence interval (CI). Results: The total sample consisted of 59,402 individuals. The prevalence of multimorbidity was 25% overall and was higher among overweight (25.8%) and obese (32.5%) individuals. Obese women 60 years or older had a higher occurrence of multimorbidity (80%). In the adjusted analysis, a lower prevalence of multimorbidity was observed among those with higher educational levels in all BMI classifications: low weight/eutrophy, PR=0.66 (95% CI, 0.58–0.75); overweight, PR=0.62 (95% CI, 0.56–0.70); and obesity, PR=0.75 (95% CI, 0.67–0.85). Conclusion: A higher prevalence of multimorbidity was found among obese women who were 60 years of age or older. Schooling was an associated factor regardless of BMI.