http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Friction Stir Lap Welding of AZ31B and AA6061 Alloys Using Tin as an Inter-Layer
Anil Bandi,Srinivasa R. Bakshi 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.7
The formation of Mg17Al12and Al3Mg2is inevitable even in solid-state joining of Al and Mg alloys by friction stir welding(FSW). In the present study, the effect of a thin inter-layer of Sn (tin) and FSW parameters (pin length and tool rotationspeed) on the microstructure and strength of friction stir lap welds of 3 mm thick AA6061 Al alloy and AZ31B Mg alloysheets was investigated. A ~ 20 μm thick Sn layer was deposited on AZ31B alloy by displacement plating. The heat generatedduring the welding melted the Sn layer and the rotation action of the tool pushed the molten Sn to the hooks on the advancingside and retreating side. The extent of Mg17Al12and Al3Mg2intermetallic compound formation was reduced with Sninter-layer with limited formation of Mg2Sn. The Sn inter-layer helped improve the lap shear strength at lower tool rotationalspeed (600 RPM) and pin lengths of 3.25 and 3.75 mm compared to joints without Sn inter-layer. Lap welds prepared witha 3.25 mm pin at 600 RPM had a lap shear strength of 245 N/mm which is the highest value reported so far and is 116%higher compared to joints without Sn inter-layer. This was due to elimination of hook at the advancing side and retreatingside and disintegration of intermetallic compounds.
ANION INDUCED BLUE TO PURPLE TRANSITION IN BACTERIORHODOPSIN
Singh, Anil K.,Kapil, Mrunalini M. Korean Society of Photoscience 1996 Journal of Photosciences Vol.3 No.2
Anil K. Singh, Mrunalini M. Kapil, Department of Chemistry, Indian Institute of Technology Bombay - 400076, INDIA Purple membrane (PM, $\lambda$$_{max}$ 570 nm) of H. halobium on treatment with sulphuric acid changes its colour to blue ($\lambda$$_{max}$ 608 nm). The purple chromophore can be regenerated from the blue chromophore by exogeneous addition of anions such as CI$^-$ and HPO$_4^{2-}$. Chloride ion is found to be more effective than the dibasic phosphate ion in regenerating the purple chromophore. Nevertheless, one thing common to the anion regeneration is that both CI$^-$ and HPO$_4^{2-}$ show marked pH effect. At pH 1.0 the efficiency of regeneration of the purple chromophore is greater than at pH 2.0, for the same anion concentration. Fluorescence and circular dichroic studies indicate that the proteins do not undergo drastic changes at the secondary' or tertiary structure level and the native structure is preserved during this transition. However, chromophoric-site interactions between retinal and the apoprotein are affected during this colour transition. A molecular mechanism is advanced for this transition.
Pundir, Anil,Kumar, Anil Techno-Press 2014 Advances in energy research Vol.2 No.2
Small Hydro-Power (SHP) is an environmental friendly technology. Usually hydro power generation projects are viewed as constructing large dams and reservoirs but available new research and engineering techniques have helped hydro power generation without large dams and without large reservoirs. In India, there are several water installations, irrigation dams, canals, streams or running rivers not tapped to generate power. In these cases the existing system and facilities can help in generating power with less investment and time. This area is yet unexplored. Harnessing a stream for hydroelectric power is a major undertaking for the energy crises and the global issues to go green. In this technical note a potential site for mini hydro power plant nearby Shoolini University is identified and examined for the economic feasibility.
Anil Kumar Khambampati,Ahmar Rashid,Jeong Seong Lee,Sin Kim,Kyung Youn Kim 대한전자공학회 2008 ITC-CSCC :International Technical Conference on Ci Vol.2008 No.7
This work is related to interfacial phase bounadry estimation in sedimentation monitoring using electrical impedance tomography. The fluid is assumed to settle into three different phases separated by sharp interfacial boundary. The time evolution of the phase interface gives important information about the sedimentation process which can be used to control and optimize the sedimentation process. Phase interface location and their corresponding conductivities estimation is treated as a stochastic nonlinear state estimation problem with the nonstationary interfacial phase boundary (state) being estimated online with the aid of unscented Kalman filter. Numerical experiments are performed to evaluate the performance of the proposed approach and is compared with conventional extended Kalman filter.
Experimental and finite element analyses of footings of varying shapes on sand
Anil, Ozgur,Akbas, S. Oguzhan,Babagiray, Salih,Gel, A. Cem,Durucan, Cengizhan Techno-Press 2017 Geomechanics & engineering Vol.12 No.2
In this study, bearing capacities and settlement profiles of six irregularly shaped footings located on sand have been experimentally and analytically investigated under the effect of axial loading. The main variable considered in the study was the geometry of the footings. The axial loads were applied from the center of gravities of the test specimens. Consequently, the effect of footing shape on the variation of the bearing capacities and settlement profiles have been investigated in this paper. The three dimensional finite element analyses of the test specimens were conducted using the PLAXIS 3D software. The finite element model results are in acceptable agreement with the results obtained using experimental investigation. In addition, the usability of the finite element technique by design engineers to determine the bearing capacities and settlement profiles of irregularly shaped footings was investigated. From the results of the study, it was observed that the geometric properties of the footings significantly influenced the variation of the bearing capacities and settlement profiles.