Flow control downstream of a circular cylinder by a permeable cylinder in deep water

Gozmen, Bengi,Akilli, Huseyin Techno-Press 2014 Wind and Structures, An International Journal (WAS Vol.19 No.4

The flow characteristics of a circular cylinder surrounded by an outer permeable cylinder were experimentally investigated using Particle Image Velocimetry Technique in deep water flow. In order to consider the effects of diameter and porosity of the outer cylinder on flow structures of the inner cylinder, five different outer cylinder diameters (D=37.5, 52.5, 60, 75 and 90 mm) and eight different porosities (${\beta}$=0.4, 0.5, 0.6, 0.65, 0.7, 0.75, 0.8 and 0.85) were selected. During the experiments, the diameter of inner cylinder was kept constant as d=30 mm. The depth-averaged free-stream velocity was adjusted as U=0.156 m/s, which corresponds to the Reynolds number of Re=5000 based on the inner cylinder diameter. It has been concluded that both the outer permeable cylinder diameter and the porosity have important influences on the attenuation of vortex shedding in the wake region. The presence of outer permeable cylinder decreases the magnitude of Reynolds shear stress and turbulent kinetic energy compared to the bare cylinder case. Moreover, the spectral analysis of vortex shedding frequency has revealed that the dominant frequency of vortex shedding downstream of the cylinder arrangement also reduces substantially due to the weakened Karman shear layer instability.

Flow control downstream of a circular cylinder by a permeable cylinder in deep water

Bengi Gozmen,Huseyin Akilli 한국풍공학회 2014 Wind and Structures, An International Journal (WAS Vol.19 No.4

The flow characteristics of a circular cylinder surrounded by an outer permeable cylinder were experimentally investigated using Particle Image Velocimetry Technique in deep water flow. In order to consider the effects of diameter and porosity of the outer cylinder on flow structures of the inner cylinder, five different outer cylinder diameters (D=37.5, 52.5, 60, 75 and 90 mm) and eight different porosities (β= 0.4, 0.5, 0.6, 0.65, 0.7, 0.75, 0.8 and 0.85) were selected. During the experiments, the diameter of inner cylinder was kept constant as d=30 mm. The depth-averaged free-stream velocity was adjusted as U=0.156 m/s, which corresponds to the Reynolds number of Re=5000 based on the inner cylinder diameter. It has been concluded that both the outer permeable cylinder diameter and the porosity have important influences on the attenuation of vortex shedding in the wake region. The presence of outer permeable cylinder decreases the magnitude of Reynolds shear stress and turbulent kinetic energy compared to the bare cylinder case. Moreover, the spectral analysis of vortex shedding frequency has revealed that the dominant frequency of vortex shedding downstream of the cylinder arrangement also reduces substantially due to the weakened Karman shear layer instability.

Experimental and numerical studies of the flow around the Ahmed body

Tunay, Tural,Sahin, Besir,Akilli, Huseyin Techno-Press 2013 Wind and Structures, An International Journal (WAS Vol.17 No.5

The present study aims to investigate characteristics of the flow structures around the Ahmed body by using both experimental and numerical methods. Therefore, 1/4 scale Ahmed body having $25^{\circ}$ slant angle was employed. The Reynolds number based on the body height, H and the free stream velocity, U was $Re_H=1.48{\times}10^4$. Investigations were conducted in two parts. In the first part of the study, Large Eddy Simulation (LES) method was used to resolve the flow structures around the Ahmed body, numerically. In the second part of the study the particle image velocimetry (PIV) technique was used to measure instantaneous velocity fields around the Ahmed body. Time-averaged and instantaneous velocity vectors maps, streamline topology and vorticity contours of the flow fields were presented and discussed in details. Comparison of the mean and turbulent quantities of the LES results and the PIV results with the results of Lienhart et al. (2000) at different locations over the slanted surface and in the wake region of the Ahmed body were also given. Flow features such as critical points and recirculation zones in the wake region downstream of the Ahmed body were well captured. The spectra of numerically and experimentally obtained stream-wise and vertical velocity fluctuations were presented and they show good consistency with the numerical result of Minguez et al. (2008).

Flow structures around a three-dimensional rectangular body with ground effect

Gurlek, Cahit,Sahin, Besir,Ozalp, Coskun,Akilli, Huseyin Techno-Press 2008 Wind and Structures, An International Journal (WAS Vol.11 No.5

An experimental investigation of the flow over the rectangular body located in close proximity to a ground board was reported using the particle image velocimetry (PIV) technique. The present experiments were conducted in a closed-loop open surface water channel with the Reynolds number, $Re_H=1.2{\times}10^4$ based on the model height. In addition to the PIV measurements, flow visualization studies were also carried out. The PIV technique provided instantaneous and time-averaged velocity vectors map, vorticity contours, streamline topology and turbulent quantities at various locations in the near wake. In the vertical symmetry plane, the upperbody flow is separated from the sharp top leading edge of the model and formed a large reverse flow region on the upper surface of the model. The flow structure downstream of the model has asymmetric double vortices. In the horizontal symmetry plane, identical separated flow regions occur on both vertical side walls and a pair of primary recirculatory bubbles dominates the wake region.

The relationship between serum asymmetric dimethylarginine levels and subjective sleep quality in normotensive patients with type 2 diabetes mellitus

Alpay Aribas,Mehmet Kayrak,Mehmet Tekinalp,Hakan Akilli,Hayrudin Alibasic,Serkan Yildirim,Mehmet Gunduz,Alpaslan Taner 대한내과학회 2015 The Korean Journal of Internal Medicine Vol.30 No.3

Background/Aims: Poor sleep quality (SQ) is associated with increased cardiovascular mortality and morbidity. Additionally, asymmetric dimethylarginine (ADMA) is an independent predictor of cardiovascular mortality and morbidity. However, no sufficient data regarding the relationship between ADMA levels and SQ have been reported. The goal of the current study was to evaluate the association between SQ and ADMA levels in normotensive patients with type 2 diabetes mellitus. Methods: The study participants consisted of 78 normotensive type 2 diabetics. The SQ of all participants was assessed using the Pittsburgh Sleep Quality Index (PSQI). Patients with a global PSQI score > 5 were defined as "poor sleepers." Factors associated with poor SQ were analyzed using a multiple regression model. Serum ADMA levels were measured using high performance liquid chromatography. Results: The median ADMA levels of the poor sleepers were increased compared with patients defined as good sleepers (5.5 [4.2 to 6.6] vs. 4.4 [2.9 to 5.4], p < 0.01, respectively). However, the L-arginine/ADMA ratio was decreased in poor sleepers (p < 0.01). Global PSQI scores were positively correlated with ADMA levels (p < 0.01) and negatively correlated with the L-arginine/ADMA ratio (p = 0.02). ADMA levels were correlated with sleep latency (p < 0.01) and sleep efficiency (p = 0.01). Logistic regression analysis showed that ADMA levels (odds ratio [OR], 1.68; 95% confidence interval [CI], 1.16 to 2.44; p = 0.01) and body mass index (OR, 1.15; 95% CI, 1.01 to 1.31; p = 0.04) were associated with poor SQ independently of glomerular filtration rate, sex, age, duration of diabetes, hemoglobin A1c, total cholesterol, and systolic blood pressure. Conclusions: Self-reported SQ was independently associated with ADMA levels in normotensive patients with diabetes mellitus.

Experimental study on passive flow control of circular cylinder via perforated splitter plate

Serdar Sahin,Tahir Durhasan,Engin Pinar,Huseyin Akilli 한국풍공학회 2021 Wind and Structures, An International Journal (WAS Vol.32 No.6

Present experimental investigation aims to reduce the shedding of vortex in the near wake region of a circular cylinder using a perforated splitter plate. Perforated plates were placed in the wake region of the cylinder and aligned with the streamwise direction. The length of the plates was equal to the diameter of the cylinder. Different plate porosities and locations were examined and obtained results were compared to the baseline cylinder. Flow measurements downstream of the cylinder were performed in a water channel by employing a particle image velocimetry technique (PIV) at a Reynolds number of Re=5×103. It is observed that the effect of the porosity on the flow characteristics of the cylinder depends on the location of the plate. The strength of shear layers and flow fluctuations in the near wake region of the cylinder are considerably diminished by the perforated splitter plate. It is found that the porosity of ε=0.3 is the most effective control element for gap ratio of G/D=0.5. On the other hand, proper gap ratio is determined as G/D=2 for porosity of ε=0.7. It is concluded in the present study that the perforated splitter plate could be used as alternative passive flow control technique in order to reduce vortex shedding of the cylinder.

Experimental and numerical studies of the flow around the Ahmed body

Tural Tunay,Besir Sahin,Huseyin Akilli 한국풍공학회 2013 Wind and Structures, An International Journal (WAS Vol.17 No.5

The present study aims to investigate characteristics of the flow structures around the Ahmed body by using both experimental and numerical methods. Therefore, ¼ scale Ahmed body having 25o slant angle was employed. The Reynolds number based on the body height, H and the free stream velocity, U was ReH=1.48x104. Investigations were conducted in two parts. In the first part of the study, Large Eddy Simulation (LES) method was used to resolve the flow structures around the Ahmed body, numerically. In the second part of the study the particle image velocimetry (PIV) technique was used to measure instantaneous velocity fields around the Ahmed body. Time-averaged and instantaneous velocity vectors maps, streamline topology and vorticity contours of the flow fields were presented and discussed in details. Comparison of the mean and turbulent quantities of the LES results and the PIV results with the results of Lienhart et al. (2000) at different locations over the slanted surface and in the wake region of the Ahmed body were also given. Flow features such as critical points and recirculation zones in the wake region downstream of the Ahmed body were well captured. The spectra of numerically and experimentally obtained stream-wise and vertical velocity fluctuations were presented and they show good consistency with the numerical result of Minguez et al. (2008).

The whole wheat effect and refined with E-selectin polymorphism on breast cancer

Bilal Fadıl Zakariya,Asmaa M. Salih Almohaidi,Seçil Akilli Şimşek,Areege Mustafa Kamal,Wijdan H. Al-Dabbagh,Safaa A. Al-Waysi 한국분석과학회 2022 분석과학 Vol.35 No.4

Wheat is rich in sources of fiber, oligosaccharides, and resistant starch, simple carbohydrates which may have a protective role against carcinoma. Additionally, Whole wheat/bran as well includes contains phytochemicals such as flavonoids, lignans, folate, phytosterols, phenolic acids, and tocols. The above phytochemicals suitable forms antioxidant and cholesterol-reducing activities. Phytoestrogens are regarded as especially essential in the preventative measures of hormonally dependent malignancies such as breast cancer (BC). In this study lowered BC risk has been associated with whole grain/bran consumption with an odds ratio (OR=0.24 and 95 %CI=0.10-0.56). Wheat/bran appears to have a reliable protective impact against BC. While intake of white bread has been associated with a high risk of BC (OR=2.63 and CI 95 %=1.07-6.48). Also, the E-Selectin (SELE) Single nucleotide polymorphisms (SNPs) rs5353 A/G and rs932307 C/T were investigated using the sanger sequences approach. There was a positive association between genotypes (rs5353 GG+AG) and (rs932307 TT+CT) with rate consumption of wheat-white/bread and these genotypes were more frequent in patients had BC in comparison with a significant difference (P=0.03) (P=0.01), respectively. The genotypes (GG+AG) frequency of the rs5353 polymorphism and (TT+CT) genotypes of the rs932307 polymorphism in the present study had a high risk of cancer with (OR=3.05), (OR=4.17) respectively. While these genotypes showed no significant association with the rate of whole grain consumption in patients and control. Therefore, the type of wheat may associate with increased incidence of disease-related with type of Polymorphism because some present genotypes of SNPs showed high (OR) which may refer to their positive associated with disease, the white wheat consumption may active the risky association between SNPs and BC.

Control of the flow past a sphere in a turbulent boundary layer using O-ring

Abdulkerim Okbaz,Muammer Ozgoren,Cetin Canpolat,Besir Sahin,Huseyin Akilli 한국풍공학회 2022 Wind and Structures, An International Journal (WAS Vol.35 No.1

This research work presents an experimental study's outcomes to reveal the impact of an O-ring on the flow control over a sphere placed in a turbulent boundary layer. The investigation is performed quantitatively and qualitatively using particle image velocimetry (PIV) and dye visualization. The sphere model having a diamater of 42.5 mm is located in a turbulent boundary layer flow over a smooth plate for gap ratios of 0≤G/D≤1.5 at Reynolds number of 5 × 103 . Flow characteristics, including patterns of instantaneous vorticity, streaklines, time-averaged streamlines, velocity vectors, velocity fluctuations, Reynolds stress correlations, and turbulence kinetic energy (<TKE>), are compared and discussed for a naked sphere and spheres having O-rings. The boundary layer velocity gradient and proximity of the sphere to the flat plate profoundly influence the flow dynamics. At proximity ratios of G/D=0.1 and 0.25, a wall jet is formed between lower side of the sphere and flat plate, and velocity fluctuations increase in regions close to the wall. At G/D=0.25, the jet flow also induces local flow separations on the flat plate. At higher proximity ratios, the velocity gradient of the boundary layer causes asymmetries in the mean flow characteristics and turbulence values in the wake region. It is observed that the O-ring with various placement angles (θ) on the sphere has a considerable alteration in the flow structure and turbulence statistics on the wake. At lower placement angles, where the O-ring is closer to the forward stagnation point of the sphere, the flow control performance of the O-ring is limited; however, its impact on the flow separation becomes pronounced as it is moved away from the forward stagnation point. At G/D=1.50 for O-ring diameters of 4.7 (2 mm) and 7 (3 mm) percent of the sphere diameter, the -ring exhibits remarkable flow control at θ=50° and θ=55° before laminar flow separation occurrence on the sphere surface, respectively. This conclusion is yielded from narrowed wakes and reductions in turbulence statistics compared to the naked sphere model. The O-ring with a diameter of 3 mm and placement angle of 50° exhibits the most effective flow control. It decreases, in sequence, streamwise velocity fluctuations and length of wake recovery region by 45% and 40%, respectively, which can be evaluated as source of decrement in drag force.

Investigation of crossflow features of a slender delta wing

Mehmet O. Tasci,Ilyas Karasu,Besir Sahin,Huseyin Akilli 한국풍공학회 2020 Wind and Structures, An International Journal (WAS Vol.31 No.3

In the present work, the main features of primary vortices and the vorticity concentrations downstream of vortex bursting in crossflow plane of a delta wing with a sweep angle of Λ=70° were investigated under the variation of the sideslip angles, β. For the pre-review of flow structures, dye visualization was conducted. In connection with a qualitative observation, a quantitative flow analysis was performed by employing Particle Image Velocimetry (PIV). The sideslip angles, β were varied with four different angles, such as 0°, 4°, 12°, and 20° while angles of attack, α were altered between 25° and 35°. This study mainly focused on the instantaneous flow features sequentially located at different crossflow planes such as x/C=0.6, 0.8 and 1.0. As a summary, time-averaged and instantaneous non-uniformity of turbulent flow structures are altered considerably resulting in non-homogeneous delta wing surface loading as a function of the sideslip angle. The vortex bursting location on the windward side of the delta wing advances towards the leading-edge point of the delta wing. The trajectory of the primary vortex on the leeward side slides towards sideways along the span of the delta wing. Besides, the uniformity of the lift coefficient, CL over the delta wing plane was severely affected due to unbalanced distribution of buffet loading over the same plane caused by the variation of the sideslip angle, β. Consequently, dissimilarities of the leading-edge vortices result in deterioration of the mean value of the lift coefficient, CL.